forked from Minki/linux
24f0b6fe52
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
328 lines
7.3 KiB
Plaintext
328 lines
7.3 KiB
Plaintext
/*
|
|
* Device Tree file for Lenovo Iomega ix4-300d
|
|
*
|
|
* Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-xp-mv78230.dtsi"
|
|
|
|
/ {
|
|
model = "Lenovo Iomega ix4-300d";
|
|
compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
|
|
"marvell,armadaxp", "marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0x00000000 0 0x20000000>; /* 512MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
|
|
|
|
internal-regs {
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
ethernet@74000 {
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb@51000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@11000 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
adt7473@2e {
|
|
compatible = "adi,adt7473";
|
|
reg = <0x2e>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
pcf8563@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
};
|
|
|
|
nand@d0000 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
marvell,nand-keep-config;
|
|
marvell,nand-enable-arbiter;
|
|
nand-on-flash-bbt;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x00000000 0x000e0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0x000e0000 0x00020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u-boot-env2";
|
|
reg = <0x00100000 0x00020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@120000 {
|
|
label = "zImage";
|
|
reg = <0x00120000 0x00400000>;
|
|
};
|
|
|
|
partition@520000 {
|
|
label = "initrd";
|
|
reg = <0x00520000 0x00400000>;
|
|
};
|
|
|
|
partition@e00000 {
|
|
label = "boot";
|
|
reg = <0x00e00000 0x3f200000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&power_button_pin &reset_button_pin
|
|
&select_button_pin &scroll_button_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
power-button {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reset-button {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
select-button {
|
|
label = "Select Button";
|
|
linux,code = <BTN_SELECT>;
|
|
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
scroll-button {
|
|
label = "Scroll Button";
|
|
linux,code = <KEY_SCROLLDOWN>;
|
|
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
spi3 {
|
|
compatible = "spi-gpio";
|
|
status = "okay";
|
|
gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
|
gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
|
|
cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
|
|
num-chipselects = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio_spi: gpio_spi@0 {
|
|
compatible = "fairchild,74hc595";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0>;
|
|
registers-number = <1>;
|
|
spi-max-frequency = <100000>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&hdd_led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
hdd-led {
|
|
label = "ix4-300d:hdd:blue";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
power-led {
|
|
label = "ix4-300d:power:white";
|
|
gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
|
|
/* init blinking while booting */
|
|
linux,default-trigger = "timer";
|
|
default-state = "on";
|
|
};
|
|
|
|
sysfail-led {
|
|
label = "ix4-300d:sysfail:red";
|
|
gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
sys-led {
|
|
label = "ix4-300d:sys:blue";
|
|
gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
hddfail-led {
|
|
label = "ix4-300d:hddfail:red";
|
|
gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
};
|
|
|
|
/*
|
|
* Warning: you need both eth1 & 0 PHY initialized (i.e having
|
|
* them up does the tweak) for poweroff to shutdown otherwise it
|
|
* reboots
|
|
*/
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&poweroff_pin>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
/* Quad port sata: Marvell 88SX7042 */
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
/* USB 3.0 xHCI controller: NEC D720200F1 */
|
|
pcie@5,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
|
reg = <0>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
poweroff_pin: poweroff-pin {
|
|
marvell,pins = "mpp24";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
power_button_pin: power-button-pin {
|
|
marvell,pins = "mpp44";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
reset_button_pin: reset-button-pin {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "gpio";
|
|
};
|
|
select_button_pin: select-button-pin {
|
|
marvell,pins = "mpp41";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
scroll_button_pin: scroll-button-pin {
|
|
marvell,pins = "mpp42";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
hdd_led_pin: hdd-led-pin {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|