forked from Minki/linux
9e622af05c
The gpio-key nodes do not have a reg property, so remove the address from the unit name. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
179 lines
3.3 KiB
Plaintext
179 lines
3.3 KiB
Plaintext
/*
|
|
* Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
|
|
* (Armada 370 SoC).
|
|
*
|
|
* Copyright (C) 2015 Seagate
|
|
*
|
|
* Author: Simon Guinot <simon.guinot@sequanux.org>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
/*
|
|
* TODO: add support for the white SATA LED.
|
|
*/
|
|
|
|
#include "armada-370.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
|
|
|
|
internal-regs {
|
|
coherency-fabric@20200 {
|
|
broken-idle;
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@74000 {
|
|
status = "okay";
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "USB Power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
|
};
|
|
regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "SATA0 power";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
power {
|
|
label = "Power button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
|
debounce-interval = <100>;
|
|
};
|
|
reset {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <100>;
|
|
};
|
|
button {
|
|
label = "USB VBUS error";
|
|
linux,code = <KEY_UNKNOWN>;
|
|
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <100>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
red-sata0 {
|
|
label = "cumulus:red:sata0";
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
gpio_poweroff {
|
|
compatible = "gpio-poweroff";
|
|
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
/* USB 3.0 Bridge ASM1042A */
|
|
pcie@1,0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-0 = <&sata_led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
sata_led_pin: sata-led-pin {
|
|
marvell,pins = "mpp60";
|
|
marvell,function = "sata0";
|
|
};
|
|
gpio_led_pin: gpio-led-pin {
|
|
marvell,pins = "mpp60";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
pinctrl-0 = <&spi0_pins2>;
|
|
pinctrl-names = "default";
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/* MX25L8006E */
|
|
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|