forked from Minki/linux
24f0b6fe52
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
316 lines
7.1 KiB
Plaintext
316 lines
7.1 KiB
Plaintext
/*
|
|
* Device Tree file for NETGEAR ReadyNAS 104
|
|
*
|
|
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-370.dtsi"
|
|
|
|
/ {
|
|
model = "NETGEAR ReadyNAS 104";
|
|
compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
|
|
|
|
internal-regs {
|
|
|
|
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
|
|
rtc@10300 {
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
ethernet@74000 {
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
};
|
|
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
|
|
i2c@11000 {
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
isl12057: isl12057@68 {
|
|
compatible = "isil,isl12057";
|
|
reg = <0x68>;
|
|
wakeup-source;
|
|
};
|
|
|
|
g762: g762@3e {
|
|
compatible = "gmt,g762";
|
|
reg = <0x3e>;
|
|
clocks = <&g762_clk>; /* input clock */
|
|
fan_gear_mode = <0>;
|
|
fan_startv = <1>;
|
|
pwm_polarity = <0>;
|
|
};
|
|
|
|
pca9554: pca9554@23 {
|
|
compatible = "nxp,pca9554";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0x23>;
|
|
};
|
|
};
|
|
|
|
nand@d0000 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
marvell,nand-keep-config;
|
|
marvell,nand-enable-arbiter;
|
|
nand-on-flash-bbt;
|
|
|
|
/* Use Hardware BCH ECC */
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x180000>; /* 1.5MB */
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "u-boot-env";
|
|
reg = <0x180000 0x20000>; /* 128KB */
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "uImage";
|
|
reg = <0x0200000 0x600000>; /* 6MB */
|
|
};
|
|
|
|
partition@800000 {
|
|
label = "minirootfs";
|
|
reg = <0x0800000 0x400000>; /* 4MB */
|
|
};
|
|
|
|
/* Last MB is for the BBT, i.e. not writable */
|
|
partition@c00000 {
|
|
label = "ubifs";
|
|
reg = <0x0c00000 0x7400000>; /* 116MB */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
g762_clk: g762-oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <8192>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&backup_led_pin &power_led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
blue-backup-led {
|
|
label = "rn104:blue:backup";
|
|
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-power-led {
|
|
label = "rn104:blue:pwr";
|
|
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "keep";
|
|
};
|
|
|
|
blue-sata1-led {
|
|
label = "rn104:blue:sata1";
|
|
gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-sata2-led {
|
|
label = "rn104:blue:sata2";
|
|
gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-sata3-led {
|
|
label = "rn104:blue:sata3";
|
|
gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
blue-sata4-led {
|
|
label = "rn104:blue:sata4";
|
|
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&backup_button_pin
|
|
&power_button_pin
|
|
&reset_button_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
backup-button {
|
|
label = "Backup Button";
|
|
linux,code = <KEY_COPY>;
|
|
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
power-button {
|
|
label = "Power Button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reset-button {
|
|
label = "Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&poweroff>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
/* Connected to FL1009 USB 3.0 controller */
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to Marvell 88SE9215 SATA controller */
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
|
reg = <0>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
poweroff: poweroff {
|
|
marvell,pins = "mpp60";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
backup_button_pin: backup-button-pin {
|
|
marvell,pins = "mpp52";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
power_button_pin: power-button-pin {
|
|
marvell,pins = "mpp62";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
backup_led_pin: backup-led-pin {
|
|
marvell,pins = "mpp63";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
power_led_pin: power-led-pin {
|
|
marvell,pins = "mpp64";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
reset_button_pin: reset-button-pin {
|
|
marvell,pins = "mpp65";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|