forked from Minki/linux
5786e2c5a3
The pins for ddc and aux are shared so you need to switch the mode when doing ddc. The ProcessAuxChannel table already sets the pin mode to DP. This should fix unreliable ddc issues on DP ports using non-DP monitors. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
1112 lines
27 KiB
C
1112 lines
27 KiB
C
/*
|
|
* Copyright 2007-8 Advanced Micro Devices, Inc.
|
|
* Copyright 2008 Red Hat Inc.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Authors: Dave Airlie
|
|
* Alex Deucher
|
|
*/
|
|
#include "drmP.h"
|
|
#include "radeon_drm.h"
|
|
#include "radeon.h"
|
|
#include "atom.h"
|
|
|
|
/**
|
|
* radeon_ddc_probe
|
|
*
|
|
*/
|
|
bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
|
|
{
|
|
u8 out_buf[] = { 0x0, 0x0};
|
|
u8 buf[2];
|
|
int ret;
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = 0x50,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = out_buf,
|
|
},
|
|
{
|
|
.addr = 0x50,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
/* on hw with routers, select right port */
|
|
if (radeon_connector->router.valid)
|
|
radeon_router_select_port(radeon_connector);
|
|
|
|
ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
|
|
if (ret == 2)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/* bit banging i2c */
|
|
|
|
static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state)
|
|
{
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
uint32_t temp;
|
|
|
|
/* RV410 appears to have a bug where the hw i2c in reset
|
|
* holds the i2c port in a bad state - switch hw i2c away before
|
|
* doing DDC - do this for all r200s/r300s/r400s for safety sake
|
|
*/
|
|
if (rec->hw_capable) {
|
|
if ((rdev->family >= CHIP_R200) && !ASIC_IS_AVIVO(rdev)) {
|
|
u32 reg;
|
|
|
|
if (rdev->family >= CHIP_RV350)
|
|
reg = RADEON_GPIO_MONID;
|
|
else if ((rdev->family == CHIP_R300) ||
|
|
(rdev->family == CHIP_R350))
|
|
reg = RADEON_GPIO_DVI_DDC;
|
|
else
|
|
reg = RADEON_GPIO_CRT2_DDC;
|
|
|
|
mutex_lock(&rdev->dc_hw_i2c_mutex);
|
|
if (rec->a_clk_reg == reg) {
|
|
WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST |
|
|
R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1)));
|
|
} else {
|
|
WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST |
|
|
R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3)));
|
|
}
|
|
mutex_unlock(&rdev->dc_hw_i2c_mutex);
|
|
}
|
|
}
|
|
|
|
/* switch the pads to ddc mode */
|
|
if (ASIC_IS_DCE3(rdev) && rec->hw_capable) {
|
|
temp = RREG32(rec->mask_clk_reg);
|
|
temp &= ~(1 << 16);
|
|
WREG32(rec->mask_clk_reg, temp);
|
|
}
|
|
|
|
/* clear the output pin values */
|
|
temp = RREG32(rec->a_clk_reg) & ~rec->a_clk_mask;
|
|
WREG32(rec->a_clk_reg, temp);
|
|
|
|
temp = RREG32(rec->a_data_reg) & ~rec->a_data_mask;
|
|
WREG32(rec->a_data_reg, temp);
|
|
|
|
/* set the pins to input */
|
|
temp = RREG32(rec->en_clk_reg) & ~rec->en_clk_mask;
|
|
WREG32(rec->en_clk_reg, temp);
|
|
|
|
temp = RREG32(rec->en_data_reg) & ~rec->en_data_mask;
|
|
WREG32(rec->en_data_reg, temp);
|
|
|
|
/* mask the gpio pins for software use */
|
|
temp = RREG32(rec->mask_clk_reg);
|
|
if (lock_state)
|
|
temp |= rec->mask_clk_mask;
|
|
else
|
|
temp &= ~rec->mask_clk_mask;
|
|
WREG32(rec->mask_clk_reg, temp);
|
|
temp = RREG32(rec->mask_clk_reg);
|
|
|
|
temp = RREG32(rec->mask_data_reg);
|
|
if (lock_state)
|
|
temp |= rec->mask_data_mask;
|
|
else
|
|
temp &= ~rec->mask_data_mask;
|
|
WREG32(rec->mask_data_reg, temp);
|
|
temp = RREG32(rec->mask_data_reg);
|
|
}
|
|
|
|
static int get_clock(void *i2c_priv)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_priv;
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
uint32_t val;
|
|
|
|
/* read the value off the pin */
|
|
val = RREG32(rec->y_clk_reg);
|
|
val &= rec->y_clk_mask;
|
|
|
|
return (val != 0);
|
|
}
|
|
|
|
|
|
static int get_data(void *i2c_priv)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_priv;
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
uint32_t val;
|
|
|
|
/* read the value off the pin */
|
|
val = RREG32(rec->y_data_reg);
|
|
val &= rec->y_data_mask;
|
|
|
|
return (val != 0);
|
|
}
|
|
|
|
static void set_clock(void *i2c_priv, int clock)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_priv;
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
uint32_t val;
|
|
|
|
/* set pin direction */
|
|
val = RREG32(rec->en_clk_reg) & ~rec->en_clk_mask;
|
|
val |= clock ? 0 : rec->en_clk_mask;
|
|
WREG32(rec->en_clk_reg, val);
|
|
}
|
|
|
|
static void set_data(void *i2c_priv, int data)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_priv;
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
uint32_t val;
|
|
|
|
/* set pin direction */
|
|
val = RREG32(rec->en_data_reg) & ~rec->en_data_mask;
|
|
val |= data ? 0 : rec->en_data_mask;
|
|
WREG32(rec->en_data_reg, val);
|
|
}
|
|
|
|
static int pre_xfer(struct i2c_adapter *i2c_adap)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
|
|
|
|
radeon_i2c_do_lock(i2c, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void post_xfer(struct i2c_adapter *i2c_adap)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
|
|
|
|
radeon_i2c_do_lock(i2c, 0);
|
|
}
|
|
|
|
/* hw i2c */
|
|
|
|
static u32 radeon_get_i2c_prescale(struct radeon_device *rdev)
|
|
{
|
|
u32 sclk = radeon_get_engine_clock(rdev);
|
|
u32 prescale = 0;
|
|
u32 nm;
|
|
u8 n, m, loop;
|
|
int i2c_clock;
|
|
|
|
switch (rdev->family) {
|
|
case CHIP_R100:
|
|
case CHIP_RV100:
|
|
case CHIP_RS100:
|
|
case CHIP_RV200:
|
|
case CHIP_RS200:
|
|
case CHIP_R200:
|
|
case CHIP_RV250:
|
|
case CHIP_RS300:
|
|
case CHIP_RV280:
|
|
case CHIP_R300:
|
|
case CHIP_R350:
|
|
case CHIP_RV350:
|
|
i2c_clock = 60;
|
|
nm = (sclk * 10) / (i2c_clock * 4);
|
|
for (loop = 1; loop < 255; loop++) {
|
|
if ((nm / loop) < loop)
|
|
break;
|
|
}
|
|
n = loop - 1;
|
|
m = loop - 2;
|
|
prescale = m | (n << 8);
|
|
break;
|
|
case CHIP_RV380:
|
|
case CHIP_RS400:
|
|
case CHIP_RS480:
|
|
case CHIP_R420:
|
|
case CHIP_R423:
|
|
case CHIP_RV410:
|
|
prescale = (((sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128;
|
|
break;
|
|
case CHIP_RS600:
|
|
case CHIP_RS690:
|
|
case CHIP_RS740:
|
|
/* todo */
|
|
break;
|
|
case CHIP_RV515:
|
|
case CHIP_R520:
|
|
case CHIP_RV530:
|
|
case CHIP_RV560:
|
|
case CHIP_RV570:
|
|
case CHIP_R580:
|
|
i2c_clock = 50;
|
|
if (rdev->family == CHIP_R520)
|
|
prescale = (127 << 8) + ((sclk * 10) / (4 * 127 * i2c_clock));
|
|
else
|
|
prescale = (((sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128;
|
|
break;
|
|
case CHIP_R600:
|
|
case CHIP_RV610:
|
|
case CHIP_RV630:
|
|
case CHIP_RV670:
|
|
/* todo */
|
|
break;
|
|
case CHIP_RV620:
|
|
case CHIP_RV635:
|
|
case CHIP_RS780:
|
|
case CHIP_RS880:
|
|
case CHIP_RV770:
|
|
case CHIP_RV730:
|
|
case CHIP_RV710:
|
|
case CHIP_RV740:
|
|
/* todo */
|
|
break;
|
|
case CHIP_CEDAR:
|
|
case CHIP_REDWOOD:
|
|
case CHIP_JUNIPER:
|
|
case CHIP_CYPRESS:
|
|
case CHIP_HEMLOCK:
|
|
/* todo */
|
|
break;
|
|
default:
|
|
DRM_ERROR("i2c: unhandled radeon chip\n");
|
|
break;
|
|
}
|
|
return prescale;
|
|
}
|
|
|
|
|
|
/* hw i2c engine for r1xx-4xx hardware
|
|
* hw can buffer up to 15 bytes
|
|
*/
|
|
static int r100_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
struct i2c_msg *p;
|
|
int i, j, k, ret = num;
|
|
u32 prescale;
|
|
u32 i2c_cntl_0, i2c_cntl_1, i2c_data;
|
|
u32 tmp, reg;
|
|
|
|
mutex_lock(&rdev->dc_hw_i2c_mutex);
|
|
/* take the pm lock since we need a constant sclk */
|
|
mutex_lock(&rdev->pm.mutex);
|
|
|
|
prescale = radeon_get_i2c_prescale(rdev);
|
|
|
|
reg = ((prescale << RADEON_I2C_PRESCALE_SHIFT) |
|
|
RADEON_I2C_DRIVE_EN |
|
|
RADEON_I2C_START |
|
|
RADEON_I2C_STOP |
|
|
RADEON_I2C_GO);
|
|
|
|
if (rdev->is_atom_bios) {
|
|
tmp = RREG32(RADEON_BIOS_6_SCRATCH);
|
|
WREG32(RADEON_BIOS_6_SCRATCH, tmp | ATOM_S6_HW_I2C_BUSY_STATE);
|
|
}
|
|
|
|
if (rec->mm_i2c) {
|
|
i2c_cntl_0 = RADEON_I2C_CNTL_0;
|
|
i2c_cntl_1 = RADEON_I2C_CNTL_1;
|
|
i2c_data = RADEON_I2C_DATA;
|
|
} else {
|
|
i2c_cntl_0 = RADEON_DVI_I2C_CNTL_0;
|
|
i2c_cntl_1 = RADEON_DVI_I2C_CNTL_1;
|
|
i2c_data = RADEON_DVI_I2C_DATA;
|
|
|
|
switch (rdev->family) {
|
|
case CHIP_R100:
|
|
case CHIP_RV100:
|
|
case CHIP_RS100:
|
|
case CHIP_RV200:
|
|
case CHIP_RS200:
|
|
case CHIP_RS300:
|
|
switch (rec->mask_clk_reg) {
|
|
case RADEON_GPIO_DVI_DDC:
|
|
/* no gpio select bit */
|
|
break;
|
|
default:
|
|
DRM_ERROR("gpio not supported with hw i2c\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
break;
|
|
case CHIP_R200:
|
|
/* only bit 4 on r200 */
|
|
switch (rec->mask_clk_reg) {
|
|
case RADEON_GPIO_DVI_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
|
|
break;
|
|
case RADEON_GPIO_MONID:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
|
|
break;
|
|
default:
|
|
DRM_ERROR("gpio not supported with hw i2c\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
break;
|
|
case CHIP_RV250:
|
|
case CHIP_RV280:
|
|
/* bits 3 and 4 */
|
|
switch (rec->mask_clk_reg) {
|
|
case RADEON_GPIO_DVI_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
|
|
break;
|
|
case RADEON_GPIO_VGA_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC2);
|
|
break;
|
|
case RADEON_GPIO_CRT2_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
|
|
break;
|
|
default:
|
|
DRM_ERROR("gpio not supported with hw i2c\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
break;
|
|
case CHIP_R300:
|
|
case CHIP_R350:
|
|
/* only bit 4 on r300/r350 */
|
|
switch (rec->mask_clk_reg) {
|
|
case RADEON_GPIO_VGA_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
|
|
break;
|
|
case RADEON_GPIO_DVI_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
|
|
break;
|
|
default:
|
|
DRM_ERROR("gpio not supported with hw i2c\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
break;
|
|
case CHIP_RV350:
|
|
case CHIP_RV380:
|
|
case CHIP_R420:
|
|
case CHIP_R423:
|
|
case CHIP_RV410:
|
|
case CHIP_RS400:
|
|
case CHIP_RS480:
|
|
/* bits 3 and 4 */
|
|
switch (rec->mask_clk_reg) {
|
|
case RADEON_GPIO_VGA_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
|
|
break;
|
|
case RADEON_GPIO_DVI_DDC:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC2);
|
|
break;
|
|
case RADEON_GPIO_MONID:
|
|
reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
|
|
break;
|
|
default:
|
|
DRM_ERROR("gpio not supported with hw i2c\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
break;
|
|
default:
|
|
DRM_ERROR("unsupported asic\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* check for bus probe */
|
|
p = &msgs[0];
|
|
if ((num == 1) && (p->len == 0)) {
|
|
WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
|
|
RADEON_I2C_NACK |
|
|
RADEON_I2C_HALT |
|
|
RADEON_I2C_SOFT_RST));
|
|
WREG32(i2c_data, (p->addr << 1) & 0xff);
|
|
WREG32(i2c_data, 0);
|
|
WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) |
|
|
(1 << RADEON_I2C_ADDR_COUNT_SHIFT) |
|
|
RADEON_I2C_EN |
|
|
(48 << RADEON_I2C_TIME_LIMIT_SHIFT)));
|
|
WREG32(i2c_cntl_0, reg);
|
|
for (k = 0; k < 32; k++) {
|
|
udelay(10);
|
|
tmp = RREG32(i2c_cntl_0);
|
|
if (tmp & RADEON_I2C_GO)
|
|
continue;
|
|
tmp = RREG32(i2c_cntl_0);
|
|
if (tmp & RADEON_I2C_DONE)
|
|
break;
|
|
else {
|
|
DRM_DEBUG("i2c write error 0x%08x\n", tmp);
|
|
WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
p = &msgs[i];
|
|
for (j = 0; j < p->len; j++) {
|
|
if (p->flags & I2C_M_RD) {
|
|
WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
|
|
RADEON_I2C_NACK |
|
|
RADEON_I2C_HALT |
|
|
RADEON_I2C_SOFT_RST));
|
|
WREG32(i2c_data, ((p->addr << 1) & 0xff) | 0x1);
|
|
WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) |
|
|
(1 << RADEON_I2C_ADDR_COUNT_SHIFT) |
|
|
RADEON_I2C_EN |
|
|
(48 << RADEON_I2C_TIME_LIMIT_SHIFT)));
|
|
WREG32(i2c_cntl_0, reg | RADEON_I2C_RECEIVE);
|
|
for (k = 0; k < 32; k++) {
|
|
udelay(10);
|
|
tmp = RREG32(i2c_cntl_0);
|
|
if (tmp & RADEON_I2C_GO)
|
|
continue;
|
|
tmp = RREG32(i2c_cntl_0);
|
|
if (tmp & RADEON_I2C_DONE)
|
|
break;
|
|
else {
|
|
DRM_DEBUG("i2c read error 0x%08x\n", tmp);
|
|
WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
p->buf[j] = RREG32(i2c_data) & 0xff;
|
|
} else {
|
|
WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
|
|
RADEON_I2C_NACK |
|
|
RADEON_I2C_HALT |
|
|
RADEON_I2C_SOFT_RST));
|
|
WREG32(i2c_data, (p->addr << 1) & 0xff);
|
|
WREG32(i2c_data, p->buf[j]);
|
|
WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) |
|
|
(1 << RADEON_I2C_ADDR_COUNT_SHIFT) |
|
|
RADEON_I2C_EN |
|
|
(48 << RADEON_I2C_TIME_LIMIT_SHIFT)));
|
|
WREG32(i2c_cntl_0, reg);
|
|
for (k = 0; k < 32; k++) {
|
|
udelay(10);
|
|
tmp = RREG32(i2c_cntl_0);
|
|
if (tmp & RADEON_I2C_GO)
|
|
continue;
|
|
tmp = RREG32(i2c_cntl_0);
|
|
if (tmp & RADEON_I2C_DONE)
|
|
break;
|
|
else {
|
|
DRM_DEBUG("i2c write error 0x%08x\n", tmp);
|
|
WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
done:
|
|
WREG32(i2c_cntl_0, 0);
|
|
WREG32(i2c_cntl_1, 0);
|
|
WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
|
|
RADEON_I2C_NACK |
|
|
RADEON_I2C_HALT |
|
|
RADEON_I2C_SOFT_RST));
|
|
|
|
if (rdev->is_atom_bios) {
|
|
tmp = RREG32(RADEON_BIOS_6_SCRATCH);
|
|
tmp &= ~ATOM_S6_HW_I2C_BUSY_STATE;
|
|
WREG32(RADEON_BIOS_6_SCRATCH, tmp);
|
|
}
|
|
|
|
mutex_unlock(&rdev->pm.mutex);
|
|
mutex_unlock(&rdev->dc_hw_i2c_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* hw i2c engine for r5xx hardware
|
|
* hw can buffer up to 15 bytes
|
|
*/
|
|
static int r500_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
struct i2c_msg *p;
|
|
int i, j, remaining, current_count, buffer_offset, ret = num;
|
|
u32 prescale;
|
|
u32 tmp, reg;
|
|
u32 saved1, saved2;
|
|
|
|
mutex_lock(&rdev->dc_hw_i2c_mutex);
|
|
/* take the pm lock since we need a constant sclk */
|
|
mutex_lock(&rdev->pm.mutex);
|
|
|
|
prescale = radeon_get_i2c_prescale(rdev);
|
|
|
|
/* clear gpio mask bits */
|
|
tmp = RREG32(rec->mask_clk_reg);
|
|
tmp &= ~rec->mask_clk_mask;
|
|
WREG32(rec->mask_clk_reg, tmp);
|
|
tmp = RREG32(rec->mask_clk_reg);
|
|
|
|
tmp = RREG32(rec->mask_data_reg);
|
|
tmp &= ~rec->mask_data_mask;
|
|
WREG32(rec->mask_data_reg, tmp);
|
|
tmp = RREG32(rec->mask_data_reg);
|
|
|
|
/* clear pin values */
|
|
tmp = RREG32(rec->a_clk_reg);
|
|
tmp &= ~rec->a_clk_mask;
|
|
WREG32(rec->a_clk_reg, tmp);
|
|
tmp = RREG32(rec->a_clk_reg);
|
|
|
|
tmp = RREG32(rec->a_data_reg);
|
|
tmp &= ~rec->a_data_mask;
|
|
WREG32(rec->a_data_reg, tmp);
|
|
tmp = RREG32(rec->a_data_reg);
|
|
|
|
/* set the pins to input */
|
|
tmp = RREG32(rec->en_clk_reg);
|
|
tmp &= ~rec->en_clk_mask;
|
|
WREG32(rec->en_clk_reg, tmp);
|
|
tmp = RREG32(rec->en_clk_reg);
|
|
|
|
tmp = RREG32(rec->en_data_reg);
|
|
tmp &= ~rec->en_data_mask;
|
|
WREG32(rec->en_data_reg, tmp);
|
|
tmp = RREG32(rec->en_data_reg);
|
|
|
|
/* */
|
|
tmp = RREG32(RADEON_BIOS_6_SCRATCH);
|
|
WREG32(RADEON_BIOS_6_SCRATCH, tmp | ATOM_S6_HW_I2C_BUSY_STATE);
|
|
saved1 = RREG32(AVIVO_DC_I2C_CONTROL1);
|
|
saved2 = RREG32(0x494);
|
|
WREG32(0x494, saved2 | 0x1);
|
|
|
|
WREG32(AVIVO_DC_I2C_ARBITRATION, AVIVO_DC_I2C_SW_WANTS_TO_USE_I2C);
|
|
for (i = 0; i < 50; i++) {
|
|
udelay(1);
|
|
if (RREG32(AVIVO_DC_I2C_ARBITRATION) & AVIVO_DC_I2C_SW_CAN_USE_I2C)
|
|
break;
|
|
}
|
|
if (i == 50) {
|
|
DRM_ERROR("failed to get i2c bus\n");
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
|
|
reg = AVIVO_DC_I2C_START | AVIVO_DC_I2C_STOP | AVIVO_DC_I2C_EN;
|
|
switch (rec->mask_clk_reg) {
|
|
case AVIVO_DC_GPIO_DDC1_MASK:
|
|
reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC1);
|
|
break;
|
|
case AVIVO_DC_GPIO_DDC2_MASK:
|
|
reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC2);
|
|
break;
|
|
case AVIVO_DC_GPIO_DDC3_MASK:
|
|
reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC3);
|
|
break;
|
|
default:
|
|
DRM_ERROR("gpio not supported with hw i2c\n");
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
/* check for bus probe */
|
|
p = &msgs[0];
|
|
if ((num == 1) && (p->len == 0)) {
|
|
WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
|
|
AVIVO_DC_I2C_NACK |
|
|
AVIVO_DC_I2C_HALT));
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
|
|
udelay(1);
|
|
WREG32(AVIVO_DC_I2C_RESET, 0);
|
|
|
|
WREG32(AVIVO_DC_I2C_DATA, (p->addr << 1) & 0xff);
|
|
WREG32(AVIVO_DC_I2C_DATA, 0);
|
|
|
|
WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48));
|
|
WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) |
|
|
AVIVO_DC_I2C_DATA_COUNT(1) |
|
|
(prescale << 16)));
|
|
WREG32(AVIVO_DC_I2C_CONTROL1, reg);
|
|
WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO);
|
|
for (j = 0; j < 200; j++) {
|
|
udelay(50);
|
|
tmp = RREG32(AVIVO_DC_I2C_STATUS1);
|
|
if (tmp & AVIVO_DC_I2C_GO)
|
|
continue;
|
|
tmp = RREG32(AVIVO_DC_I2C_STATUS1);
|
|
if (tmp & AVIVO_DC_I2C_DONE)
|
|
break;
|
|
else {
|
|
DRM_DEBUG("i2c write error 0x%08x\n", tmp);
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; i < num; i++) {
|
|
p = &msgs[i];
|
|
remaining = p->len;
|
|
buffer_offset = 0;
|
|
if (p->flags & I2C_M_RD) {
|
|
while (remaining) {
|
|
if (remaining > 15)
|
|
current_count = 15;
|
|
else
|
|
current_count = remaining;
|
|
WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
|
|
AVIVO_DC_I2C_NACK |
|
|
AVIVO_DC_I2C_HALT));
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
|
|
udelay(1);
|
|
WREG32(AVIVO_DC_I2C_RESET, 0);
|
|
|
|
WREG32(AVIVO_DC_I2C_DATA, ((p->addr << 1) & 0xff) | 0x1);
|
|
WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48));
|
|
WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) |
|
|
AVIVO_DC_I2C_DATA_COUNT(current_count) |
|
|
(prescale << 16)));
|
|
WREG32(AVIVO_DC_I2C_CONTROL1, reg | AVIVO_DC_I2C_RECEIVE);
|
|
WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO);
|
|
for (j = 0; j < 200; j++) {
|
|
udelay(50);
|
|
tmp = RREG32(AVIVO_DC_I2C_STATUS1);
|
|
if (tmp & AVIVO_DC_I2C_GO)
|
|
continue;
|
|
tmp = RREG32(AVIVO_DC_I2C_STATUS1);
|
|
if (tmp & AVIVO_DC_I2C_DONE)
|
|
break;
|
|
else {
|
|
DRM_DEBUG("i2c read error 0x%08x\n", tmp);
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
for (j = 0; j < current_count; j++)
|
|
p->buf[buffer_offset + j] = RREG32(AVIVO_DC_I2C_DATA) & 0xff;
|
|
remaining -= current_count;
|
|
buffer_offset += current_count;
|
|
}
|
|
} else {
|
|
while (remaining) {
|
|
if (remaining > 15)
|
|
current_count = 15;
|
|
else
|
|
current_count = remaining;
|
|
WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
|
|
AVIVO_DC_I2C_NACK |
|
|
AVIVO_DC_I2C_HALT));
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
|
|
udelay(1);
|
|
WREG32(AVIVO_DC_I2C_RESET, 0);
|
|
|
|
WREG32(AVIVO_DC_I2C_DATA, (p->addr << 1) & 0xff);
|
|
for (j = 0; j < current_count; j++)
|
|
WREG32(AVIVO_DC_I2C_DATA, p->buf[buffer_offset + j]);
|
|
|
|
WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48));
|
|
WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) |
|
|
AVIVO_DC_I2C_DATA_COUNT(current_count) |
|
|
(prescale << 16)));
|
|
WREG32(AVIVO_DC_I2C_CONTROL1, reg);
|
|
WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO);
|
|
for (j = 0; j < 200; j++) {
|
|
udelay(50);
|
|
tmp = RREG32(AVIVO_DC_I2C_STATUS1);
|
|
if (tmp & AVIVO_DC_I2C_GO)
|
|
continue;
|
|
tmp = RREG32(AVIVO_DC_I2C_STATUS1);
|
|
if (tmp & AVIVO_DC_I2C_DONE)
|
|
break;
|
|
else {
|
|
DRM_DEBUG("i2c write error 0x%08x\n", tmp);
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT);
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
remaining -= current_count;
|
|
buffer_offset += current_count;
|
|
}
|
|
}
|
|
}
|
|
|
|
done:
|
|
WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
|
|
AVIVO_DC_I2C_NACK |
|
|
AVIVO_DC_I2C_HALT));
|
|
WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
|
|
udelay(1);
|
|
WREG32(AVIVO_DC_I2C_RESET, 0);
|
|
|
|
WREG32(AVIVO_DC_I2C_ARBITRATION, AVIVO_DC_I2C_SW_DONE_USING_I2C);
|
|
WREG32(AVIVO_DC_I2C_CONTROL1, saved1);
|
|
WREG32(0x494, saved2);
|
|
tmp = RREG32(RADEON_BIOS_6_SCRATCH);
|
|
tmp &= ~ATOM_S6_HW_I2C_BUSY_STATE;
|
|
WREG32(RADEON_BIOS_6_SCRATCH, tmp);
|
|
|
|
mutex_unlock(&rdev->pm.mutex);
|
|
mutex_unlock(&rdev->dc_hw_i2c_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
|
|
struct radeon_device *rdev = i2c->dev->dev_private;
|
|
struct radeon_i2c_bus_rec *rec = &i2c->rec;
|
|
int ret = 0;
|
|
|
|
switch (rdev->family) {
|
|
case CHIP_R100:
|
|
case CHIP_RV100:
|
|
case CHIP_RS100:
|
|
case CHIP_RV200:
|
|
case CHIP_RS200:
|
|
case CHIP_R200:
|
|
case CHIP_RV250:
|
|
case CHIP_RS300:
|
|
case CHIP_RV280:
|
|
case CHIP_R300:
|
|
case CHIP_R350:
|
|
case CHIP_RV350:
|
|
case CHIP_RV380:
|
|
case CHIP_R420:
|
|
case CHIP_R423:
|
|
case CHIP_RV410:
|
|
case CHIP_RS400:
|
|
case CHIP_RS480:
|
|
ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
|
|
break;
|
|
case CHIP_RS600:
|
|
case CHIP_RS690:
|
|
case CHIP_RS740:
|
|
/* XXX fill in hw i2c implementation */
|
|
break;
|
|
case CHIP_RV515:
|
|
case CHIP_R520:
|
|
case CHIP_RV530:
|
|
case CHIP_RV560:
|
|
case CHIP_RV570:
|
|
case CHIP_R580:
|
|
if (rec->mm_i2c)
|
|
ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
|
|
else
|
|
ret = r500_hw_i2c_xfer(i2c_adap, msgs, num);
|
|
break;
|
|
case CHIP_R600:
|
|
case CHIP_RV610:
|
|
case CHIP_RV630:
|
|
case CHIP_RV670:
|
|
/* XXX fill in hw i2c implementation */
|
|
break;
|
|
case CHIP_RV620:
|
|
case CHIP_RV635:
|
|
case CHIP_RS780:
|
|
case CHIP_RS880:
|
|
case CHIP_RV770:
|
|
case CHIP_RV730:
|
|
case CHIP_RV710:
|
|
case CHIP_RV740:
|
|
/* XXX fill in hw i2c implementation */
|
|
break;
|
|
case CHIP_CEDAR:
|
|
case CHIP_REDWOOD:
|
|
case CHIP_JUNIPER:
|
|
case CHIP_CYPRESS:
|
|
case CHIP_HEMLOCK:
|
|
/* XXX fill in hw i2c implementation */
|
|
break;
|
|
default:
|
|
DRM_ERROR("i2c: unhandled radeon chip\n");
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 radeon_hw_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm radeon_i2c_algo = {
|
|
.master_xfer = radeon_hw_i2c_xfer,
|
|
.functionality = radeon_hw_i2c_func,
|
|
};
|
|
|
|
struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
|
|
struct radeon_i2c_bus_rec *rec,
|
|
const char *name)
|
|
{
|
|
struct radeon_device *rdev = dev->dev_private;
|
|
struct radeon_i2c_chan *i2c;
|
|
int ret;
|
|
|
|
i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL);
|
|
if (i2c == NULL)
|
|
return NULL;
|
|
|
|
i2c->rec = *rec;
|
|
i2c->adapter.owner = THIS_MODULE;
|
|
i2c->dev = dev;
|
|
i2c_set_adapdata(&i2c->adapter, i2c);
|
|
if (rec->mm_i2c ||
|
|
(rec->hw_capable &&
|
|
radeon_hw_i2c &&
|
|
((rdev->family <= CHIP_RS480) ||
|
|
((rdev->family >= CHIP_RV515) && (rdev->family <= CHIP_R580))))) {
|
|
/* set the radeon hw i2c adapter */
|
|
sprintf(i2c->adapter.name, "Radeon i2c hw bus %s", name);
|
|
i2c->adapter.algo = &radeon_i2c_algo;
|
|
ret = i2c_add_adapter(&i2c->adapter);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to register hw i2c %s\n", name);
|
|
goto out_free;
|
|
}
|
|
} else {
|
|
/* set the radeon bit adapter */
|
|
sprintf(i2c->adapter.name, "Radeon i2c bit bus %s", name);
|
|
i2c->adapter.algo_data = &i2c->algo.bit;
|
|
i2c->algo.bit.pre_xfer = pre_xfer;
|
|
i2c->algo.bit.post_xfer = post_xfer;
|
|
i2c->algo.bit.setsda = set_data;
|
|
i2c->algo.bit.setscl = set_clock;
|
|
i2c->algo.bit.getsda = get_data;
|
|
i2c->algo.bit.getscl = get_clock;
|
|
i2c->algo.bit.udelay = 20;
|
|
/* vesa says 2.2 ms is enough, 1 jiffy doesn't seem to always
|
|
* make this, 2 jiffies is a lot more reliable */
|
|
i2c->algo.bit.timeout = 2;
|
|
i2c->algo.bit.data = i2c;
|
|
ret = i2c_bit_add_bus(&i2c->adapter);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to register bit i2c %s\n", name);
|
|
goto out_free;
|
|
}
|
|
}
|
|
|
|
return i2c;
|
|
out_free:
|
|
kfree(i2c);
|
|
return NULL;
|
|
|
|
}
|
|
|
|
struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev,
|
|
struct radeon_i2c_bus_rec *rec,
|
|
const char *name)
|
|
{
|
|
struct radeon_i2c_chan *i2c;
|
|
int ret;
|
|
|
|
i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL);
|
|
if (i2c == NULL)
|
|
return NULL;
|
|
|
|
i2c->rec = *rec;
|
|
i2c->adapter.owner = THIS_MODULE;
|
|
i2c->dev = dev;
|
|
i2c_set_adapdata(&i2c->adapter, i2c);
|
|
i2c->adapter.algo_data = &i2c->algo.dp;
|
|
i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch;
|
|
i2c->algo.dp.address = 0;
|
|
ret = i2c_dp_aux_add_bus(&i2c->adapter);
|
|
if (ret) {
|
|
DRM_INFO("Failed to register i2c %s\n", name);
|
|
goto out_free;
|
|
}
|
|
|
|
return i2c;
|
|
out_free:
|
|
kfree(i2c);
|
|
return NULL;
|
|
|
|
}
|
|
|
|
void radeon_i2c_destroy(struct radeon_i2c_chan *i2c)
|
|
{
|
|
if (!i2c)
|
|
return;
|
|
i2c_del_adapter(&i2c->adapter);
|
|
kfree(i2c);
|
|
}
|
|
|
|
/* Add the default buses */
|
|
void radeon_i2c_init(struct radeon_device *rdev)
|
|
{
|
|
if (rdev->is_atom_bios)
|
|
radeon_atombios_i2c_init(rdev);
|
|
else
|
|
radeon_combios_i2c_init(rdev);
|
|
}
|
|
|
|
/* remove all the buses */
|
|
void radeon_i2c_fini(struct radeon_device *rdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RADEON_MAX_I2C_BUS; i++) {
|
|
if (rdev->i2c_bus[i]) {
|
|
radeon_i2c_destroy(rdev->i2c_bus[i]);
|
|
rdev->i2c_bus[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Add additional buses */
|
|
void radeon_i2c_add(struct radeon_device *rdev,
|
|
struct radeon_i2c_bus_rec *rec,
|
|
const char *name)
|
|
{
|
|
struct drm_device *dev = rdev->ddev;
|
|
int i;
|
|
|
|
for (i = 0; i < RADEON_MAX_I2C_BUS; i++) {
|
|
if (!rdev->i2c_bus[i]) {
|
|
rdev->i2c_bus[i] = radeon_i2c_create(dev, rec, name);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* looks up bus based on id */
|
|
struct radeon_i2c_chan *radeon_i2c_lookup(struct radeon_device *rdev,
|
|
struct radeon_i2c_bus_rec *i2c_bus)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RADEON_MAX_I2C_BUS; i++) {
|
|
if (rdev->i2c_bus[i] &&
|
|
(rdev->i2c_bus[i]->rec.i2c_id == i2c_bus->i2c_id)) {
|
|
return rdev->i2c_bus[i];
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
struct drm_encoder *radeon_best_encoder(struct drm_connector *connector)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
void radeon_i2c_get_byte(struct radeon_i2c_chan *i2c_bus,
|
|
u8 slave_addr,
|
|
u8 addr,
|
|
u8 *val)
|
|
{
|
|
u8 out_buf[2];
|
|
u8 in_buf[2];
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = slave_addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = out_buf,
|
|
},
|
|
{
|
|
.addr = slave_addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = in_buf,
|
|
}
|
|
};
|
|
|
|
out_buf[0] = addr;
|
|
out_buf[1] = 0;
|
|
|
|
if (i2c_transfer(&i2c_bus->adapter, msgs, 2) == 2) {
|
|
*val = in_buf[0];
|
|
DRM_DEBUG("val = 0x%02x\n", *val);
|
|
} else {
|
|
DRM_ERROR("i2c 0x%02x 0x%02x read failed\n",
|
|
addr, *val);
|
|
}
|
|
}
|
|
|
|
void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c_bus,
|
|
u8 slave_addr,
|
|
u8 addr,
|
|
u8 val)
|
|
{
|
|
uint8_t out_buf[2];
|
|
struct i2c_msg msg = {
|
|
.addr = slave_addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = out_buf,
|
|
};
|
|
|
|
out_buf[0] = addr;
|
|
out_buf[1] = val;
|
|
|
|
if (i2c_transfer(&i2c_bus->adapter, &msg, 1) != 1)
|
|
DRM_ERROR("i2c 0x%02x 0x%02x write failed\n",
|
|
addr, val);
|
|
}
|
|
|
|
/* router switching */
|
|
void radeon_router_select_port(struct radeon_connector *radeon_connector)
|
|
{
|
|
u8 val;
|
|
|
|
if (!radeon_connector->router.valid)
|
|
return;
|
|
|
|
radeon_i2c_get_byte(radeon_connector->router_bus,
|
|
radeon_connector->router.i2c_addr,
|
|
0x3, &val);
|
|
val &= radeon_connector->router.mux_control_pin;
|
|
radeon_i2c_put_byte(radeon_connector->router_bus,
|
|
radeon_connector->router.i2c_addr,
|
|
0x3, val);
|
|
radeon_i2c_get_byte(radeon_connector->router_bus,
|
|
radeon_connector->router.i2c_addr,
|
|
0x1, &val);
|
|
val &= radeon_connector->router.mux_control_pin;
|
|
val |= radeon_connector->router.mux_state;
|
|
radeon_i2c_put_byte(radeon_connector->router_bus,
|
|
radeon_connector->router.i2c_addr,
|
|
0x1, val);
|
|
}
|
|
|