67c2404922
With this patch we try to kill 2 birds with 1 stone. First of all, some switches that use tag_ocelot.c don't have the exact same bitfield layout for the DSA tags. The destination ports field is different for Seville VSC9953 for example. So the choices are to either duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow take into account a supposed ocelot->dest_ports_offset when packing this field into the DSA injection header (again not ideal). Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero and call some packing() functions of dubious performance in the fastpath. And most of the values it needs to pack are pretty much constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good if we could improve that. The proposed solution is to allocate a memory area per port at probe time, initialize that with the statically defined bits as per chip hardware revision, and just perform a simpler memcpy in the fastpath. Other alternatives have been analyzed, such as: - Create a separate tag_seville.c: too much code duplication for just 1 bit field difference. - Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like tag_brcm.c, which would have a separate .xmit function. Again, too much code duplication for just 1 bit field difference. - Allocate the template from the init function of the tag_ocelot.c module, instead of from the driver: couldn't figure out a method of accessing the correct port template corresponding to the correct tagger in the .xmit function. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
66 lines
2.0 KiB
C
66 lines
2.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/* Copyright 2019 NXP Semiconductors
|
|
*/
|
|
#ifndef _MSCC_FELIX_H
|
|
#define _MSCC_FELIX_H
|
|
|
|
#define ocelot_to_felix(o) container_of((o), struct felix, ocelot)
|
|
#define FELIX_NUM_TC 8
|
|
|
|
/* Platform-specific information */
|
|
struct felix_info {
|
|
const struct resource *target_io_res;
|
|
const struct resource *port_io_res;
|
|
const struct resource *imdio_res;
|
|
const struct reg_field *regfields;
|
|
const u32 *const *map;
|
|
const struct ocelot_ops *ops;
|
|
int shared_queue_sz;
|
|
int num_mact_rows;
|
|
const struct ocelot_stat_layout *stats_layout;
|
|
unsigned int num_stats;
|
|
int num_ports;
|
|
int num_tx_queues;
|
|
struct vcap_field *vcap_is2_keys;
|
|
struct vcap_field *vcap_is2_actions;
|
|
const struct vcap_props *vcap;
|
|
int switch_pci_bar;
|
|
int imdio_pci_bar;
|
|
int (*mdio_bus_alloc)(struct ocelot *ocelot);
|
|
void (*mdio_bus_free)(struct ocelot *ocelot);
|
|
void (*pcs_config)(struct ocelot *ocelot, int port,
|
|
unsigned int link_an_mode,
|
|
const struct phylink_link_state *state);
|
|
void (*pcs_link_up)(struct ocelot *ocelot, int port,
|
|
unsigned int link_an_mode,
|
|
phy_interface_t interface,
|
|
int speed, int duplex);
|
|
void (*pcs_link_state)(struct ocelot *ocelot, int port,
|
|
struct phylink_link_state *state);
|
|
int (*prevalidate_phy_mode)(struct ocelot *ocelot, int port,
|
|
phy_interface_t phy_mode);
|
|
int (*port_setup_tc)(struct dsa_switch *ds, int port,
|
|
enum tc_setup_type type, void *type_data);
|
|
void (*port_sched_speed_set)(struct ocelot *ocelot, int port,
|
|
u32 speed);
|
|
void (*xmit_template_populate)(struct ocelot *ocelot, int port);
|
|
};
|
|
|
|
extern struct felix_info felix_info_vsc9959;
|
|
|
|
enum felix_instance {
|
|
FELIX_INSTANCE_VSC9959 = 0,
|
|
};
|
|
|
|
/* DSA glue / front-end for struct ocelot */
|
|
struct felix {
|
|
struct dsa_switch *ds;
|
|
struct pci_dev *pdev;
|
|
struct felix_info *info;
|
|
struct ocelot ocelot;
|
|
struct mii_bus *imdio;
|
|
struct phy_device **pcs;
|
|
};
|
|
|
|
#endif
|