forked from Minki/linux
677e28b1cc
External high frequency clock CKIH1 is optional for i.MX51, so move it setup into boards where it is used. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
314 lines
6.2 KiB
Plaintext
314 lines
6.2 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx51.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX51 Babbage Board";
|
|
compatible = "fsl,imx51-babbage", "fsl,imx51";
|
|
|
|
memory {
|
|
reg = <0x90000000 0x20000000>;
|
|
};
|
|
|
|
display@di0 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
crtcs = <&ipu 0>;
|
|
interface-pix-fmt = "rgb24";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
|
|
};
|
|
|
|
display@di1 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
crtcs = <&ipu 1>;
|
|
interface-pix-fmt = "rgb565";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power Button";
|
|
gpios = <&gpio2 21 0>;
|
|
linux,code = <116>; /* KEY_POWER */
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx51-babbage-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx51-babbage-sgtl5000";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
|
|
clocks {
|
|
ckih1 {
|
|
clock-frequency = <22579200>;
|
|
};
|
|
|
|
clk_26M: codec_clock {
|
|
compatible = "fixed-clock";
|
|
reg=<0>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <26000000>;
|
|
gpios = <&gpio4 26 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1_1>;
|
|
fsl,cd-controller;
|
|
fsl,wp-controller;
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc2_1>;
|
|
cd-gpios = <&gpio1 6 0>;
|
|
wp-gpios = <&gpio1 5 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3_1>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1_1>;
|
|
fsl,spi-num-chipselects = <2>;
|
|
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
|
|
status = "okay";
|
|
|
|
pmic: mc13892@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mc13892";
|
|
spi-max-frequency = <6000000>;
|
|
spi-cs-high;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <8 0x4>;
|
|
|
|
regulators {
|
|
sw1_reg: sw1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1375000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3_reg: sw3 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: vpll {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig_reg: vdig {
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsd_reg: vsd {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
};
|
|
|
|
vusb2_reg: vusb2 {
|
|
regulator-min-microvolt = <2400000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vvideo_reg: vvideo {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
};
|
|
|
|
vaudio_reg: vaudio {
|
|
regulator-min-microvolt = <2300000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vcam_reg: vcam {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
flash: at45db321d@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
|
|
spi-max-frequency = <25000000>;
|
|
reg = <1>;
|
|
|
|
partition@0 {
|
|
label = "U-Boot";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "Kernel";
|
|
reg = <0x40000 0x3c0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ssi2 {
|
|
fsl,mode = "i2s-slave";
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
hog {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
|
|
MX51_PAD_GPIO1_1__SD1_WP 0x20d5
|
|
MX51_PAD_GPIO1_5__GPIO1_5 0x100
|
|
MX51_PAD_GPIO1_6__GPIO1_6 0x100
|
|
MX51_PAD_EIM_A27__GPIO2_21 0x5
|
|
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
|
|
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
|
|
MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_1>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2_1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2_1>;
|
|
status = "okay";
|
|
|
|
sgtl5000: codec@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&clk_26M>;
|
|
VDDA-supply = <&vdig_reg>;
|
|
VDDIO-supply = <&vvideo_reg>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux_1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec_1>;
|
|
phy-mode = "mii";
|
|
status = "okay";
|
|
};
|
|
|
|
&kpp {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_kpp_1>;
|
|
linux,keymap = <0x00000067 /* KEY_UP */
|
|
0x0001006c /* KEY_DOWN */
|
|
0x00020072 /* KEY_VOLUMEDOWN */
|
|
0x00030066 /* KEY_HOME */
|
|
0x0100006a /* KEY_RIGHT */
|
|
0x01010069 /* KEY_LEFT */
|
|
0x0102001c /* KEY_ENTER */
|
|
0x01030073 /* KEY_VOLUMEUP */
|
|
0x02000040 /* KEY_F6 */
|
|
0x02010042 /* KEY_F8 */
|
|
0x02020043 /* KEY_F9 */
|
|
0x02030044 /* KEY_F10 */
|
|
0x0300003b /* KEY_F1 */
|
|
0x0301003c /* KEY_F2 */
|
|
0x0302003d /* KEY_F3 */
|
|
0x03030074>; /* KEY_POWER */
|
|
status = "okay";
|
|
};
|