linux/drivers/usb/musb
Grazvydas Ignotas b65ae0f1a7 usb: musb: gadget: use platform callback to enable vbus
On some platform configurations (like OMAP3+twl4030) it's the platform
code that enables VBUS, not OTG transceiver, so call vbus platform
callback instead, it will then call the transceiver if needed.

This fixes a use case where USB cable is plugged first and gadget
driver is loaded later after that.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-02 11:42:44 +03:00
..
am35x.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
blackfin.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
blackfin.h usb: musb: drop a gigantic amount of ifdeferry 2011-07-01 14:31:10 -07:00
cppi_dma.c usb: musb: drop dangling CONFIG_USB_MUSB_DEBUG 2013-03-18 11:18:01 +02:00
cppi_dma.h
da8xx.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
davinci.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
davinci.h usb: musb: davinci: Fix build breakage 2012-06-04 18:29:42 +03:00
Kconfig usb: phy: remove CONFIG_USB_OTG_UTILS 2013-03-18 11:18:08 +02:00
Makefile usb: musb: Add support for ti81xx platform 2012-05-04 13:59:34 +03:00
musb_core.c usb: musb: core: log VBUS error 2013-03-22 08:44:24 +02:00
musb_core.h usb: musb: remove hand-crafted id handling 2012-11-01 12:32:23 +02:00
musb_debug.h usb: musb: remove extern qualifier from musb_debug.h header 2011-12-21 13:21:02 +02:00
musb_debugfs.c usb: remove use of __devinit 2012-11-21 13:27:16 -08:00
musb_dma.h usb: remove use of __devinit 2012-11-21 13:27:16 -08:00
musb_dsps.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
musb_gadget_ep0.c usb: musb: avoid FADDR read access 2012-10-31 15:21:01 +02:00
musb_gadget.c usb: musb: gadget: use platform callback to enable vbus 2013-04-02 11:42:44 +03:00
musb_gadget.h usb: musb: gadget: do not poke with gadget's list_head 2011-02-17 21:11:46 +02:00
musb_host.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
musb_host.h usb: musb: host: Handle highmem in PIO mode 2012-08-07 14:27:18 +03:00
musb_io.h usb: musb: use io{read,write}*_rep accessors 2012-12-17 17:15:13 -08:00
musb_regs.h usb: musb: tusb6010: fix compilation 2011-08-12 11:52:50 +03:00
musb_virthub.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
musbhsdma.c usb: remove use of __devinit 2012-11-21 13:27:16 -08:00
musbhsdma.h usb: musb: remove generic_interrupt 2012-11-06 15:32:13 +02:00
omap2430.c usb: musb: omap2430: turn off vbus on cable disconnect 2013-04-02 11:42:44 +03:00
omap2430.h usb: start using the control module driver 2013-01-25 12:27:24 +02:00
tusb6010_omap.c ARM: arm-soc: power management and clock changes 2012-12-13 10:58:20 -08:00
tusb6010.c usb: otg: prefix otg_state_string with usb_ 2013-03-18 11:18:03 +02:00
tusb6010.h
ux500_dma.c usb: musb: ux500_dma: fix sparse warning 2013-03-27 13:19:00 +02:00
ux500.c usb: phy: ab8500-usb: update irq handling code 2013-03-18 14:41:33 +02:00