linux/drivers/gpu/drm/bridge
Archit Taneja 62b2f026cd drm/bridge: adv7533: Change number of DSI lanes dynamically
Lower modes on ADV7533 require lower number of DSI lanes for correct
operation. If ADV7533 is being used with 4 DSI lanes, then switch the
lanes to 3 when the target mode's pixel clock is less than 80 Mhz.

Based on patch by Andy Green <andy.green@linaro.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-07-13 14:24:37 +05:30
..
adv7511 drm/bridge: adv7533: Change number of DSI lanes dynamically 2016-07-13 14:24:37 +05:30
analogix drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time 2016-04-05 10:13:10 +08:00
analogix-anx78xx.c drm/bridge: anx78xx: Rely on the default ->best_encoder() behavior 2016-06-10 17:25:16 +02:00
analogix-anx78xx.h drm/bridge: Add Analogix anx78xx support 2016-05-12 11:32:14 +02:00
dw-hdmi-ahb-audio.c drm/bridge: dw-hdmi: Use dashes in filenames 2015-11-24 17:52:58 +01:00
dw-hdmi-audio.h drm/bridge: dw-hdmi: Use dashes in filenames 2015-11-24 17:52:58 +01:00
dw-hdmi.c drm/bridge: dw-hdmi: Use drm_atomic_helper_best_encoder() 2016-06-10 17:25:30 +02:00
dw-hdmi.h drm/bridge: dw-hdmi: Use dashes in filenames 2015-11-24 17:52:58 +01:00
Kconfig drm/i2c: adv7511: Move to bridge folder 2016-07-13 14:24:35 +05:30
Makefile drm/i2c: adv7511: Move to bridge folder 2016-07-13 14:24:35 +05:30
nxp-ptn3460.c drm/bridge: ptn3460: Rely on the default ->best_encoder() behavior 2016-06-10 17:25:20 +02:00
parade-ps8622.c drm/bridge: ps8622: Rely on the default ->best_encoder() behavior 2016-06-10 17:25:24 +02:00
sii902x.c drm/bridge: Add sii902x driver 2016-06-20 15:55:49 +02:00