leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
625504aeff
linux/drivers/pinctrl
History
Niklas Söderlund 625504aeff pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[] 
When adding GP-1-28 port pin support it was forgotten to remove the
CLKOUT pin from the list of pins that are not associated with a GPIO
port in pinmux_pins[]. This results in a warning when reading the
pinctrl files in sysfs as the CLKOUT pin is still added as a none GPIO
pin. Fix this by removing the duplicated entry which is no longer
needed.

~ # cat /sys/kernel/debug/pinctrl/e6060000.pin-controller/pinconf-pins
[   89.432081] ------------[ cut here ]------------
[   89.436904] Pin 496 is not in bias info list
[   89.441252] WARNING: CPU: 1 PID: 456 at drivers/pinctrl/sh-pfc/core.c:408 sh_pfc_pin_to_bias_reg+0xb0/0xb8
[   89.451002] CPU: 1 PID: 456 Comm: cat Not tainted 4.16.0-rc1-arm64-renesas-00048-gdfafc344a4f24dde #12
[   89.460394] Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
[   89.468910] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[   89.473747] pc : sh_pfc_pin_to_bias_reg+0xb0/0xb8
[   89.478495] lr : sh_pfc_pin_to_bias_reg+0xb0/0xb8
[   89.483241] sp : ffff00000aff3ab0
[   89.486587] x29: ffff00000aff3ab0 x28: ffff00000893c698
[   89.491955] x27: ffff000008ad7d98 x26: 0000000000000000
[   89.497323] x25: ffff8006fb3f5028 x24: ffff8006fb3f5018
[   89.502690] x23: 0000000000000001 x22: 00000000000001f0
[   89.508057] x21: ffff8006fb3f5018 x20: ffff000008bef000
[   89.513423] x19: 0000000000000000 x18: ffffffffffffffff
[   89.518790] x17: 0000000000006c4a x16: ffff000008d67c98
[   89.524157] x15: 0000000000000001 x14: ffff00000896ca98
[   89.529524] x13: 00000000cce5f611 x12: ffff8006f8d3b5a8
[   89.534891] x11: ffff00000981e000 x10: ffff000008befa08
[   89.540258] x9 : ffff8006f9b987a0 x8 : ffff000008befa08
[   89.545625] x7 : ffff000008137094 x6 : 0000000000000000
[   89.550991] x5 : 0000000000000000 x4 : 0000000000000001
[   89.556357] x3 : 0000000000000007 x2 : 0000000000000007
[   89.561723] x1 : 1ff24f80f1818600 x0 : 0000000000000000
[   89.567091] Call trace:
[   89.569561]  sh_pfc_pin_to_bias_reg+0xb0/0xb8
[   89.573960]  r8a7795_pinmux_get_bias+0x30/0xc0
[   89.578445]  sh_pfc_pinconf_get+0x1e0/0x2d8
[   89.582669]  pin_config_get_for_pin+0x20/0x30
[   89.587067]  pinconf_generic_dump_one+0x180/0x1c8
[   89.591815]  pinconf_generic_dump_pins+0x84/0xd8
[   89.596476]  pinconf_pins_show+0xc8/0x130
[   89.600528]  seq_read+0xe4/0x510
[   89.603789]  full_proxy_read+0x60/0x90
[   89.607576]  __vfs_read+0x30/0x140
[   89.611010]  vfs_read+0x90/0x170
[   89.614269]  SyS_read+0x60/0xd8
[   89.617443]  __sys_trace_return+0x0/0x4
[   89.621314] ---[ end trace 99c8d0d39c13e794 ]---

Fixes: 82d2de5a4f ("pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support")
Reviewed-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-08 13:02:01 +01:00
..
aspeed pinctrl: aspeed: Rework strap register write logic for the AST2500 2017-08-31 13:39:38 +02:00
bcm This is the bulk of pin control changes for the v4.15 2017-11-16 10:57:11 -08:00
berlin pinctrl: move const qualifier before struct 2017-08-14 15:01:02 +02:00
freescale pinctrl: imx7ulp: constify struct imx_cfg_params_decode 2018-01-11 10:29:40 +01:00
intel This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
mediatek pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call 2018-01-11 10:43:24 +01:00
meson pinctrl: meson-axg: adjust uart_ao_b pin group naming 2018-02-12 10:47:36 +01:00
mvebu This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
nomadik pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() 2018-01-16 11:06:13 +01:00
pxa pinctrl: pxa: pxa2xx: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE 2017-11-30 14:42:04 +01:00
qcom pinctrl: qcom: Add msm8998 pinctrl driver 2018-01-09 15:30:20 +01:00
samsung pinctrl: samsung: Add SPDX license identifiers 2018-01-03 08:46:54 +01:00
sh-pfc pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[] 2018-03-08 13:02:01 +01:00
sirf Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into devel 2017-11-09 09:38:42 +01:00
spear pinctrl: spear: Delete an error message for a failed memory allocation in spear_pinctrl_probe() 2018-01-03 08:46:55 +01:00
sprd pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() 2018-01-16 11:08:24 +01:00
stm32 This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
sunxi This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
tegra pinctrl: tegra: Delete two error messages for a failed memory allocation in tegra_pinctrl_probe() 2018-01-03 08:46:55 +01:00
ti pinctrl: ti-iodelay: remove redundant unused variable dev 2017-11-08 13:49:57 +01:00
uniphier pinctrl: uniphier: refactor drive strength get/set functions 2018-01-11 10:40:23 +01:00
vt8500 pinctrl: vt8500: Delete an error message for a failed memory allocation in five functions 2018-01-08 08:15:46 +01:00
zte pinctrl: zte: fix 'functions' allocation in zx_pinctrl_build_state() 2017-08-14 15:01:01 +02:00
core.c pinctrl: Really force states during suspend/resume 2017-12-20 08:24:13 +01:00
core.h pinctrl/gpio: Unify namespace for cross-calls 2017-09-22 11:02:10 +02:00
devicetree.c pinctrl: Delete an error message 2017-08-31 15:45:29 +02:00
devicetree.h pinctrl: core: Use delayed work for hogs 2017-01-03 09:26:16 +01:00
Kconfig pinctrl: Add Microsemi Ocelot SoC driver 2018-01-09 14:54:59 +01:00
Makefile pinctrl: Add Microsemi Ocelot SoC driver 2018-01-09 14:54:59 +01:00
pinconf-generic.c pinctrl: Add skew-delay pin config and bindings 2017-11-08 13:49:45 +01:00
pinconf.c pinctrl: check ops->pin_config_set in pinconf_set_config() 2017-08-14 15:01:59 +02:00
pinconf.h pinctrl: move const qualifier before struct 2017-08-14 15:01:02 +02:00
pinctrl-adi2-bf54x.c
pinctrl-adi2-bf60x.c
pinctrl-adi2.c pinctrl: adi2: Improve a size determination in two functions 2017-12-21 10:22:41 +01:00
pinctrl-adi2.h
pinctrl-amd.c This is the bulk of pin control changes for the v4.15 2017-11-16 10:57:11 -08:00
pinctrl-amd.h pinctrl/amd: save pin registers over suspend/resume 2017-09-12 15:58:45 +02:00
pinctrl-artpec6.c pinctrl: artpec6: constify pinconf_ops, pinctrl_ops, and pinmux_ops structures 2017-08-22 14:36:59 +02:00
pinctrl-as3722.c pinctrl: as3722: Use devm_pinctrl_register() for pinctrl registration 2016-04-21 09:23:21 +02:00
pinctrl-at91-pio4.c pinctrl: at91-pio4: account for const type of of_device_id.data 2018-01-08 08:15:47 +01:00
pinctrl-at91.c pinctrl: at91: Delete an error message for a failed memory allocation in at91_pinctrl_mux_mask() 2018-01-03 08:46:49 +01:00
pinctrl-at91.h
pinctrl-axp209.c pinctrl: axp209: account for const type of of_device_id.data 2018-01-08 08:15:47 +01:00
pinctrl-coh901.c gpio: Move irqdomain into struct gpio_irq_chip 2017-11-08 14:06:21 +01:00
pinctrl-coh901.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pinctrl-da850-pupd.c Merge branch 'ib-pinctrl-genprops' into devel 2017-01-26 15:27:54 +01:00
pinctrl-digicolor.c pinctrl: digicolor: constify pinconf_ops, pinctrl_ops, and pinmux_ops structures 2017-08-22 14:39:36 +02:00
pinctrl-falcon.c pinctrl: update my email address 2016-12-30 09:17:02 +01:00
pinctrl-gemini.c This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
pinctrl-ingenic.c pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() 2018-01-18 08:51:32 +01:00
pinctrl-lantiq.c pinctrl: update my email address 2016-12-30 09:17:02 +01:00
pinctrl-lantiq.h pinctrl: update my email address 2016-12-30 09:17:02 +01:00
pinctrl-lpc18xx.c pinctrl: Widen the generic pinconf argument from 16 to 24 bits 2017-01-26 15:22:32 +01:00
pinctrl-max77620.c pinctrl: max77620: Use common error handling code in max77620_pinconf_set() 2017-11-08 13:49:57 +01:00
pinctrl-mcp23s08.c pinctrl: mcp23s08: fix irq setup order 2018-01-30 15:17:14 +01:00
pinctrl-ocelot.c pinctrl: Add Microsemi Ocelot SoC driver 2018-01-09 14:54:59 +01:00
pinctrl-oxnas.c gpio: Move irqdomain into struct gpio_irq_chip 2017-11-08 14:06:21 +01:00
pinctrl-palmas.c pinctrl: palmas: Delete an error message for a failed memory allocation in palmas_pinctrl_probe() 2018-01-03 08:46:49 +01:00
pinctrl-pic32.c gpio: Move irqdomain into struct gpio_irq_chip 2017-11-08 14:06:21 +01:00
pinctrl-pic32.h pinctrl: pinctrl-pic32: Add PIC32 pin control driver 2016-02-05 23:54:47 +01:00
pinctrl-pistachio.c gpio: Move irqdomain into struct gpio_irq_chip 2017-11-08 14:06:21 +01:00
pinctrl-rk805.c pinctrl: Add pinctrl driver for the RK805 PMIC 2017-08-21 08:54:46 +01:00
pinctrl-rockchip.c pinctrl: rockchip: Fix a typo in four comment lines 2018-01-03 08:46:51 +01:00
pinctrl-rza1.c pinctrl: rza1: Add support for RZ/A1L 2017-10-09 09:16:21 +02:00
pinctrl-single.c This is the bulk of pin control changes for the v4.16 kernel cycle: 2018-02-02 14:22:53 -08:00
pinctrl-st.c gpio: Move irqdomain into struct gpio_irq_chip 2017-11-08 14:06:21 +01:00
pinctrl-sx150x.c pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping 2018-01-18 11:04:47 +01:00
pinctrl-tb10x.c pinctrl: tb10x: constify pinconf_ops, pinctrl_ops, and pinmux_ops structures 2017-08-22 14:41:40 +02:00
pinctrl-tz1090-pdc.c pinctrl: tz1090-pdc: Delete an error message for a failed memory allocation in two functions 2018-01-03 08:46:52 +01:00
pinctrl-tz1090.c pinctrl: tz1090: Delete an error message for a failed memory allocation in two functions 2018-01-03 08:46:52 +01:00
pinctrl-u300.c pinctrl: u300: make u300_pmx_registers static 2016-06-13 09:27:43 +02:00
pinctrl-utils.c pinctrl: utils: Delete an error message for a failed memory allocation in pinctrl_utils_add_map_configs() 2018-01-03 08:46:53 +01:00
pinctrl-utils.h pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map 2016-04-01 15:06:36 +02:00
pinctrl-xway.c pinctrl: xway: Delete two error messages for a failed memory allocation in pinmux_xway_probe() 2018-01-03 08:46:53 +01:00
pinctrl-zynq.c pinctrl: zynq: Fix warnings in the driver 2017-08-14 15:01:01 +02:00
pinmux.c pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() 2018-01-16 11:07:18 +01:00
pinmux.h pinctrl: move const qualifier before struct 2017-08-14 15:01:02 +02:00