forked from Minki/linux
bb413db591
Several at91sam9 chips need the alternate reset procedure to be sure to halt SDRAM smoothly before resetting the chip. This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips affected. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
346 lines
7.8 KiB
C
346 lines
7.8 KiB
C
/*
|
|
* arch/arm/mach-at91/at91sam9rl.c
|
|
*
|
|
* Copyright (C) 2005 SAN People
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/cpu.h>
|
|
#include <mach/at91sam9rl.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91_rstc.h>
|
|
#include <mach/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
|
|
static struct map_desc at91sam9rl_io_desc[] __initdata = {
|
|
{
|
|
.virtual = AT91_VA_BASE_SYS,
|
|
.pfn = __phys_to_pfn(AT91_BASE_SYS),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static struct map_desc at91sam9rl_sram_desc[] __initdata = {
|
|
{
|
|
.pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Clocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The peripheral clocks.
|
|
*/
|
|
static struct clk pioA_clk = {
|
|
.name = "pioA_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioB_clk = {
|
|
.name = "pioB_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioC_clk = {
|
|
.name = "pioC_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioD_clk = {
|
|
.name = "pioD_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart0_clk = {
|
|
.name = "usart0_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_US0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart1_clk = {
|
|
.name = "usart1_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_US1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart2_clk = {
|
|
.name = "usart2_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_US2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart3_clk = {
|
|
.name = "usart3_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_US3,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc_clk = {
|
|
.name = "mci_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_MCI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi0_clk = {
|
|
.name = "twi0_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi1_clk = {
|
|
.name = "twi1_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi_clk = {
|
|
.name = "spi_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_SPI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc0_clk = {
|
|
.name = "ssc0_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc1_clk = {
|
|
.name = "ssc1_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tc0_clk = {
|
|
.name = "tc0_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_TC0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tc1_clk = {
|
|
.name = "tc1_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_TC1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tc2_clk = {
|
|
.name = "tc2_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_TC2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pwm_clk = {
|
|
.name = "pwm_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tsc_clk = {
|
|
.name = "tsc_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_TSC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk dma_clk = {
|
|
.name = "dma_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_DMA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk udphs_clk = {
|
|
.name = "udphs_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk lcdc_clk = {
|
|
.name = "lcdc_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ac97_clk = {
|
|
.name = "ac97_clk",
|
|
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
|
|
static struct clk *periph_clocks[] __initdata = {
|
|
&pioA_clk,
|
|
&pioB_clk,
|
|
&pioC_clk,
|
|
&pioD_clk,
|
|
&usart0_clk,
|
|
&usart1_clk,
|
|
&usart2_clk,
|
|
&usart3_clk,
|
|
&mmc_clk,
|
|
&twi0_clk,
|
|
&twi1_clk,
|
|
&spi_clk,
|
|
&ssc0_clk,
|
|
&ssc1_clk,
|
|
&tc0_clk,
|
|
&tc1_clk,
|
|
&tc2_clk,
|
|
&pwm_clk,
|
|
&tsc_clk,
|
|
&dma_clk,
|
|
&udphs_clk,
|
|
&lcdc_clk,
|
|
&ac97_clk,
|
|
// irq0
|
|
};
|
|
|
|
/*
|
|
* The two programmable clocks.
|
|
* You must configure pin multiplexing to bring these signals out.
|
|
*/
|
|
static struct clk pck0 = {
|
|
.name = "pck0",
|
|
.pmc_mask = AT91_PMC_PCK0,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 0,
|
|
};
|
|
static struct clk pck1 = {
|
|
.name = "pck1",
|
|
.pmc_mask = AT91_PMC_PCK1,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 1,
|
|
};
|
|
|
|
static void __init at91sam9rl_register_clocks(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
|
clk_register(periph_clocks[i]);
|
|
|
|
clk_register(&pck0);
|
|
clk_register(&pck1);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* GPIO
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct at91_gpio_bank at91sam9rl_gpio[] = {
|
|
{
|
|
.id = AT91SAM9RL_ID_PIOA,
|
|
.offset = AT91_PIOA,
|
|
.clock = &pioA_clk,
|
|
}, {
|
|
.id = AT91SAM9RL_ID_PIOB,
|
|
.offset = AT91_PIOB,
|
|
.clock = &pioB_clk,
|
|
}, {
|
|
.id = AT91SAM9RL_ID_PIOC,
|
|
.offset = AT91_PIOC,
|
|
.clock = &pioC_clk,
|
|
}, {
|
|
.id = AT91SAM9RL_ID_PIOD,
|
|
.offset = AT91_PIOD,
|
|
.clock = &pioD_clk,
|
|
}
|
|
};
|
|
|
|
static void at91sam9rl_poweroff(void)
|
|
{
|
|
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9RL processor initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
void __init at91sam9rl_initialize(unsigned long main_clock)
|
|
{
|
|
unsigned long cidr, sram_size;
|
|
|
|
/* Map peripherals */
|
|
iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
|
|
|
|
cidr = at91_sys_read(AT91_DBGU_CIDR);
|
|
|
|
switch (cidr & AT91_CIDR_SRAMSIZ) {
|
|
case AT91_CIDR_SRAMSIZ_32K:
|
|
sram_size = 2 * SZ_16K;
|
|
break;
|
|
case AT91_CIDR_SRAMSIZ_16K:
|
|
default:
|
|
sram_size = SZ_16K;
|
|
}
|
|
|
|
at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
|
|
at91sam9rl_sram_desc->length = sram_size;
|
|
|
|
/* Map SRAM */
|
|
iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
|
|
|
|
at91_arch_reset = at91sam9_alt_reset;
|
|
pm_power_off = at91sam9rl_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
|
|
|
|
/* Init clock subsystem */
|
|
at91_clock_init(main_clock);
|
|
|
|
/* Register the processor-specific clocks */
|
|
at91sam9rl_register_clocks();
|
|
|
|
/* Register GPIO subsystem */
|
|
at91_gpio_init(at91sam9rl_gpio, 4);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Interrupt initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
|
*/
|
|
static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller */
|
|
7, /* System Peripherals */
|
|
1, /* Parallel IO Controller A */
|
|
1, /* Parallel IO Controller B */
|
|
1, /* Parallel IO Controller C */
|
|
1, /* Parallel IO Controller D */
|
|
5, /* USART 0 */
|
|
5, /* USART 1 */
|
|
5, /* USART 2 */
|
|
5, /* USART 3 */
|
|
0, /* Multimedia Card Interface */
|
|
6, /* Two-Wire Interface 0 */
|
|
6, /* Two-Wire Interface 1 */
|
|
5, /* Serial Peripheral Interface */
|
|
4, /* Serial Synchronous Controller 0 */
|
|
4, /* Serial Synchronous Controller 1 */
|
|
0, /* Timer Counter 0 */
|
|
0, /* Timer Counter 1 */
|
|
0, /* Timer Counter 2 */
|
|
0,
|
|
0, /* Touch Screen Controller */
|
|
0, /* DMA Controller */
|
|
2, /* USB Device High speed port */
|
|
2, /* LCD Controller */
|
|
6, /* AC97 Controller */
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0, /* Advanced Interrupt Controller */
|
|
};
|
|
|
|
void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
|
|
{
|
|
if (!priority)
|
|
priority = at91sam9rl_default_irq_priority;
|
|
|
|
/* Initialize the AIC interrupt controller */
|
|
at91_aic_init(priority);
|
|
|
|
/* Enable GPIO interrupts */
|
|
at91_gpio_irq_setup();
|
|
}
|