forked from Minki/linux
bb413db591
Several at91sam9 chips need the alternate reset procedure to be sure to halt SDRAM smoothly before resetting the chip. This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips affected. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
354 lines
8.4 KiB
C
354 lines
8.4 KiB
C
/*
|
|
* arch/arm/mach-at91/at91sam9263.c
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/at91sam9263.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91_rstc.h>
|
|
#include <mach/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
|
|
static struct map_desc at91sam9263_io_desc[] __initdata = {
|
|
{
|
|
.virtual = AT91_VA_BASE_SYS,
|
|
.pfn = __phys_to_pfn(AT91_BASE_SYS),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
|
|
.pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
|
|
.length = AT91SAM9263_SRAM0_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
|
|
.pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
|
|
.length = AT91SAM9263_SRAM1_SIZE,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Clocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The peripheral clocks.
|
|
*/
|
|
static struct clk pioA_clk = {
|
|
.name = "pioA_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_PIOA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioB_clk = {
|
|
.name = "pioB_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_PIOB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioCDE_clk = {
|
|
.name = "pioCDE_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart0_clk = {
|
|
.name = "usart0_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_US0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart1_clk = {
|
|
.name = "usart1_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_US1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart2_clk = {
|
|
.name = "usart2_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_US2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc0_clk = {
|
|
.name = "mci0_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_MCI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc1_clk = {
|
|
.name = "mci1_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_MCI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk can_clk = {
|
|
.name = "can_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_CAN,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi_clk = {
|
|
.name = "twi_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_TWI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi0_clk = {
|
|
.name = "spi0_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_SPI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi1_clk = {
|
|
.name = "spi1_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_SPI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc0_clk = {
|
|
.name = "ssc0_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_SSC0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc1_clk = {
|
|
.name = "ssc1_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_SSC1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ac97_clk = {
|
|
.name = "ac97_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_AC97C,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tcb_clk = {
|
|
.name = "tcb_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_TCB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pwm_clk = {
|
|
.name = "pwm_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_PWMC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk macb_clk = {
|
|
.name = "macb_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_EMAC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk dma_clk = {
|
|
.name = "dma_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_DMA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twodge_clk = {
|
|
.name = "2dge_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_2DGE,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk udc_clk = {
|
|
.name = "udc_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_UDP,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk isi_clk = {
|
|
.name = "isi_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_ISI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk lcdc_clk = {
|
|
.name = "lcdc_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_LCDC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ohci_clk = {
|
|
.name = "ohci_clk",
|
|
.pmc_mask = 1 << AT91SAM9263_ID_UHP,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
|
|
static struct clk *periph_clocks[] __initdata = {
|
|
&pioA_clk,
|
|
&pioB_clk,
|
|
&pioCDE_clk,
|
|
&usart0_clk,
|
|
&usart1_clk,
|
|
&usart2_clk,
|
|
&mmc0_clk,
|
|
&mmc1_clk,
|
|
&can_clk,
|
|
&twi_clk,
|
|
&spi0_clk,
|
|
&spi1_clk,
|
|
&ssc0_clk,
|
|
&ssc1_clk,
|
|
&ac97_clk,
|
|
&tcb_clk,
|
|
&pwm_clk,
|
|
&macb_clk,
|
|
&twodge_clk,
|
|
&udc_clk,
|
|
&isi_clk,
|
|
&lcdc_clk,
|
|
&dma_clk,
|
|
&ohci_clk,
|
|
// irq0 .. irq1
|
|
};
|
|
|
|
/*
|
|
* The four programmable clocks.
|
|
* You must configure pin multiplexing to bring these signals out.
|
|
*/
|
|
static struct clk pck0 = {
|
|
.name = "pck0",
|
|
.pmc_mask = AT91_PMC_PCK0,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 0,
|
|
};
|
|
static struct clk pck1 = {
|
|
.name = "pck1",
|
|
.pmc_mask = AT91_PMC_PCK1,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 1,
|
|
};
|
|
static struct clk pck2 = {
|
|
.name = "pck2",
|
|
.pmc_mask = AT91_PMC_PCK2,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 2,
|
|
};
|
|
static struct clk pck3 = {
|
|
.name = "pck3",
|
|
.pmc_mask = AT91_PMC_PCK3,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 3,
|
|
};
|
|
|
|
static void __init at91sam9263_register_clocks(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
|
clk_register(periph_clocks[i]);
|
|
|
|
clk_register(&pck0);
|
|
clk_register(&pck1);
|
|
clk_register(&pck2);
|
|
clk_register(&pck3);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* GPIO
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct at91_gpio_bank at91sam9263_gpio[] = {
|
|
{
|
|
.id = AT91SAM9263_ID_PIOA,
|
|
.offset = AT91_PIOA,
|
|
.clock = &pioA_clk,
|
|
}, {
|
|
.id = AT91SAM9263_ID_PIOB,
|
|
.offset = AT91_PIOB,
|
|
.clock = &pioB_clk,
|
|
}, {
|
|
.id = AT91SAM9263_ID_PIOCDE,
|
|
.offset = AT91_PIOC,
|
|
.clock = &pioCDE_clk,
|
|
}, {
|
|
.id = AT91SAM9263_ID_PIOCDE,
|
|
.offset = AT91_PIOD,
|
|
.clock = &pioCDE_clk,
|
|
}, {
|
|
.id = AT91SAM9263_ID_PIOCDE,
|
|
.offset = AT91_PIOE,
|
|
.clock = &pioCDE_clk,
|
|
}
|
|
};
|
|
|
|
static void at91sam9263_poweroff(void)
|
|
{
|
|
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9263 processor initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
void __init at91sam9263_initialize(unsigned long main_clock)
|
|
{
|
|
/* Map peripherals */
|
|
iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
|
|
|
|
at91_arch_reset = at91sam9_alt_reset;
|
|
pm_power_off = at91sam9263_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
|
|
|
|
/* Init clock subsystem */
|
|
at91_clock_init(main_clock);
|
|
|
|
/* Register the processor-specific clocks */
|
|
at91sam9263_register_clocks();
|
|
|
|
/* Register GPIO subsystem */
|
|
at91_gpio_init(at91sam9263_gpio, 5);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Interrupt initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
|
*/
|
|
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller (FIQ) */
|
|
7, /* System Peripherals */
|
|
1, /* Parallel IO Controller A */
|
|
1, /* Parallel IO Controller B */
|
|
1, /* Parallel IO Controller C, D and E */
|
|
0,
|
|
0,
|
|
5, /* USART 0 */
|
|
5, /* USART 1 */
|
|
5, /* USART 2 */
|
|
0, /* Multimedia Card Interface 0 */
|
|
0, /* Multimedia Card Interface 1 */
|
|
3, /* CAN */
|
|
6, /* Two-Wire Interface */
|
|
5, /* Serial Peripheral Interface 0 */
|
|
5, /* Serial Peripheral Interface 1 */
|
|
4, /* Serial Synchronous Controller 0 */
|
|
4, /* Serial Synchronous Controller 1 */
|
|
5, /* AC97 Controller */
|
|
0, /* Timer Counter 0, 1 and 2 */
|
|
0, /* Pulse Width Modulation Controller */
|
|
3, /* Ethernet */
|
|
0,
|
|
0, /* 2D Graphic Engine */
|
|
2, /* USB Device Port */
|
|
0, /* Image Sensor Interface */
|
|
3, /* LDC Controller */
|
|
0, /* DMA Controller */
|
|
0,
|
|
2, /* USB Host port */
|
|
0, /* Advanced Interrupt Controller (IRQ0) */
|
|
0, /* Advanced Interrupt Controller (IRQ1) */
|
|
};
|
|
|
|
void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
|
|
{
|
|
if (!priority)
|
|
priority = at91sam9263_default_irq_priority;
|
|
|
|
/* Initialize the AIC interrupt controller */
|
|
at91_aic_init(priority);
|
|
|
|
/* Enable GPIO interrupts */
|
|
at91_gpio_irq_setup();
|
|
}
|