leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5f76895e4c
linux/drivers/tty/serial
History
Geert Uytterhoeven 5f76895e4c serial: sh-sci: Fix late enablement of AUTORTS 
When changing hardware control flow for a UART with dedicated RTS/CTS
pins, the new AUTORTS state is not immediately reflected in the
hardware, but only when RTS is raised.  However, the serial core does
not call .set_mctrl() after .set_termios(), hence AUTORTS may only
become effective when the port is closed, and reopened later.
Note that this problem does not happen when manually using stty to
change CRTSCTS, as AUTORTS will work fine on next open.

To fix this, call .set_mctrl() from .set_termios() when dedicated
RTS/CTS pins are present, to refresh the AUTORTS or RTS state.
This is similar to what other drivers supporting AUTORTS do (e.g.
omap-serial).

Reported-by: Baumann, Christoph (C.) <cbaumann@visteon.com>
Fixes: 33f50ffc25 ("serial: sh-sci: Fix support for hardware-assisted RTS/CTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:29:05 +02:00
..
8250 Merge 4.11-rc4 into tty-next 2017-03-29 08:58:53 +02:00
cpm_uart tty: serial: cpm_uart: make use of for_each_node_by_type() 2017-02-03 10:12:16 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c serial: altera_jtaguart: add earlycon support 2017-03-17 14:14:00 +09:00
altera_uart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
amba-pl010.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
amba-pl011.c Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" 2017-03-17 14:04:06 +09:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c tty/serial: atmel: move atmel_serial header into driver directory 2017-03-14 10:59:04 +08:00
atmel_serial.h tty/serial: atmel: move atmel_serial header into driver directory 2017-03-14 10:59:04 +08:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c tty: serial: constify dev_pm_ops structures 2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c
dz.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
etraxfs-uart.c
fsl_lpuart.c tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock 2017-01-12 11:51:24 +01:00
icom.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c serial: ifx6x60: Free memory when probe fails 2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c serial: imx: Fix the CTS_B polarity in RS485 mode 2017-01-31 10:54:58 +01:00
ioc3_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ioc4_serial.c scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances 2017-02-27 18:43:47 -08:00
ip22zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig uartlite: Adding a kernel parameter for the number of uartlites 2017-03-17 14:14:30 +09:00
kgdb_nmi.c
kgdboc.c
lantiq.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
lpc32xx_hs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
Makefile tty: serial: Makefile: move kgdb to be initialized last 2016-10-27 16:27:24 +02:00
max310x.c serial: max310x: Add support for newer silicon revisions 2017-01-12 11:51:24 +01:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty: serial: meson: allow baud-rates higher than 115200 2017-01-19 14:38:57 +01:00
mpc52xx_uart.c
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
msm_serial.c tty: serial: msm: Fix module autoload 2017-01-12 11:51:25 +01:00
mux.c
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: support CMSPAR termios cflag 2017-01-12 11:51:24 +01:00
netx-serial.c
omap-serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pch_uart.c serial: pch_uart: add terminate entry for dmi_system_id tables 2016-10-27 16:01:31 +02:00
pic32_uart.c serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy 2017-01-12 11:51:24 +01:00
pic32_uart.h
pmac_zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pxa.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Continue to work if DMA request fails 2017-03-07 19:58:37 +01:00
samsung.h serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
sb1250-duart.c drivers: convert sbd_duart.map_guard from atomic_t to refcount_t 2017-03-14 11:01:40 +08:00
sc16is7xx.c sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h> 2017-03-02 08:42:27 +01:00
sccnxp.c
serial_core.c tty: serial_core, remove state checks in uart_poll* 2017-03-17 14:17:11 +09:00
serial_ks8695.c
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
serial-tegra.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sh-sci.c serial: sh-sci: Fix late enablement of AUTORTS 2017-03-31 15:29:05 +02:00
sh-sci.h serial: sh-sci: consider DR (data ready) bit adequately 2017-02-03 10:14:10 +01:00
sirfsoc_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sprd_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
st-asc.c serial: st-asc: Change default baudrate from 9600 to 115200 2017-03-31 15:29:05 +02:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c sparc64: Send break twice from console to return to boot prom 2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c uartlite: Adding a kernel parameter for the number of uartlites 2017-03-17 14:14:30 +09:00
ucc_uart.c
vr41xx_siu.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
vt8500_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
xilinx_uartps.c serial: xuartps: Cleanup the clock enable 2017-03-17 14:14:00 +09:00
zs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
zs.h