forked from Minki/linux
5a0e3ad6af
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
234 lines
5.6 KiB
C
234 lines
5.6 KiB
C
/*
|
|
* tef6862.c Philips TEF6862 Car Radio Enhanced Selectivity Tuner
|
|
* Copyright (c) 2009 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-id.h>
|
|
#include <linux/slab.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
|
|
#define DRIVER_NAME "tef6862"
|
|
|
|
#define FREQ_MUL 16000
|
|
|
|
#define TEF6862_LO_FREQ (875 * FREQ_MUL / 10)
|
|
#define TEF6862_HI_FREQ (108 * FREQ_MUL)
|
|
|
|
/* Write mode sub addresses */
|
|
#define WM_SUB_BANDWIDTH 0x0
|
|
#define WM_SUB_PLLM 0x1
|
|
#define WM_SUB_PLLL 0x2
|
|
#define WM_SUB_DAA 0x3
|
|
#define WM_SUB_AGC 0x4
|
|
#define WM_SUB_BAND 0x5
|
|
#define WM_SUB_CONTROL 0x6
|
|
#define WM_SUB_LEVEL 0x7
|
|
#define WM_SUB_IFCF 0x8
|
|
#define WM_SUB_IFCAP 0x9
|
|
#define WM_SUB_ACD 0xA
|
|
#define WM_SUB_TEST 0xF
|
|
|
|
/* Different modes of the MSA register */
|
|
#define MODE_BUFFER 0x0
|
|
#define MODE_PRESET 0x1
|
|
#define MODE_SEARCH 0x2
|
|
#define MODE_AF_UPDATE 0x3
|
|
#define MODE_JUMP 0x4
|
|
#define MODE_CHECK 0x5
|
|
#define MODE_LOAD 0x6
|
|
#define MODE_END 0x7
|
|
#define MODE_SHIFT 5
|
|
|
|
struct tef6862_state {
|
|
struct v4l2_subdev sd;
|
|
unsigned long freq;
|
|
};
|
|
|
|
static inline struct tef6862_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct tef6862_state, sd);
|
|
}
|
|
|
|
static u16 tef6862_sigstr(struct i2c_client *client)
|
|
{
|
|
u8 buf[4];
|
|
int err = i2c_master_recv(client, buf, sizeof(buf));
|
|
if (err == sizeof(buf))
|
|
return buf[3] << 8;
|
|
return 0;
|
|
}
|
|
|
|
static int tef6862_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
|
|
{
|
|
if (v->index > 0)
|
|
return -EINVAL;
|
|
|
|
/* only support FM for now */
|
|
strlcpy(v->name, "FM", sizeof(v->name));
|
|
v->type = V4L2_TUNER_RADIO;
|
|
v->rangelow = TEF6862_LO_FREQ;
|
|
v->rangehigh = TEF6862_HI_FREQ;
|
|
v->rxsubchans = V4L2_TUNER_SUB_MONO;
|
|
v->capability = V4L2_TUNER_CAP_LOW;
|
|
v->audmode = V4L2_TUNER_MODE_STEREO;
|
|
v->signal = tef6862_sigstr(v4l2_get_subdevdata(sd));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tef6862_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
|
|
{
|
|
return v->index ? -EINVAL : 0;
|
|
}
|
|
|
|
static int tef6862_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
|
|
{
|
|
struct tef6862_state *state = to_state(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
u16 pll;
|
|
u8 i2cmsg[3];
|
|
int err;
|
|
|
|
if (f->tuner != 0)
|
|
return -EINVAL;
|
|
|
|
pll = 1964 + ((f->frequency - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
|
|
i2cmsg[0] = (MODE_PRESET << MODE_SHIFT) | WM_SUB_PLLM;
|
|
i2cmsg[1] = (pll >> 8) & 0xff;
|
|
i2cmsg[2] = pll & 0xff;
|
|
|
|
err = i2c_master_send(client, i2cmsg, sizeof(i2cmsg));
|
|
if (!err)
|
|
state->freq = f->frequency;
|
|
return err;
|
|
}
|
|
|
|
static int tef6862_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
|
|
{
|
|
struct tef6862_state *state = to_state(sd);
|
|
|
|
if (f->tuner != 0)
|
|
return -EINVAL;
|
|
f->type = V4L2_TUNER_RADIO;
|
|
f->frequency = state->freq;
|
|
return 0;
|
|
}
|
|
|
|
static int tef6862_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEF6862, 0);
|
|
}
|
|
|
|
static const struct v4l2_subdev_tuner_ops tef6862_tuner_ops = {
|
|
.g_tuner = tef6862_g_tuner,
|
|
.s_tuner = tef6862_s_tuner,
|
|
.s_frequency = tef6862_s_frequency,
|
|
.g_frequency = tef6862_g_frequency,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops tef6862_core_ops = {
|
|
.g_chip_ident = tef6862_g_chip_ident,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops tef6862_ops = {
|
|
.core = &tef6862_core_ops,
|
|
.tuner = &tef6862_tuner_ops,
|
|
};
|
|
|
|
/*
|
|
* Generic i2c probe
|
|
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
|
|
*/
|
|
|
|
static int __devinit tef6862_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct tef6862_state *state;
|
|
struct v4l2_subdev *sd;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
v4l_info(client, "chip found @ 0x%02x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
state = kmalloc(sizeof(struct tef6862_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return -ENOMEM;
|
|
state->freq = TEF6862_LO_FREQ;
|
|
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &tef6862_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit tef6862_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
kfree(to_state(sd));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id tef6862_id[] = {
|
|
{DRIVER_NAME, 0},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, tef6862_id);
|
|
|
|
static struct i2c_driver tef6862_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = DRIVER_NAME,
|
|
},
|
|
.probe = tef6862_probe,
|
|
.remove = tef6862_remove,
|
|
.id_table = tef6862_id,
|
|
};
|
|
|
|
static __init int tef6862_init(void)
|
|
{
|
|
return i2c_add_driver(&tef6862_driver);
|
|
}
|
|
|
|
static __exit void tef6862_exit(void)
|
|
{
|
|
i2c_del_driver(&tef6862_driver);
|
|
}
|
|
|
|
module_init(tef6862_init);
|
|
module_exit(tef6862_exit);
|
|
|
|
MODULE_DESCRIPTION("TEF6862 Car Radio Enhanced Selectivity Tuner");
|
|
MODULE_AUTHOR("Mocean Laboratories");
|
|
MODULE_LICENSE("GPL v2");
|
|
|