forked from Minki/linux
3772e5da44
Provides the data bytes snooped over the LPC snoop bus to userspace as a (blocking) misc character device. Bytes output from the host using LPC I/O transactions to the snooped port can be watched or retrieved from the character device using a simple command like this: ~# od -w1 -A n -t x1 /dev/aspeed-lpc-snoop0 10 de ad c0 ff ee Signed-off-by: Robert Lippert <rlippert@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
350 lines
8.8 KiB
C
350 lines
8.8 KiB
C
/*
|
|
* Copyright 2017 Google Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Provides a simple driver to control the ASPEED LPC snoop interface which
|
|
* allows the BMC to listen on and save the data written by
|
|
* the host to an arbitrary LPC I/O port.
|
|
*
|
|
* Typically used by the BMC to "watch" host boot progress via port
|
|
* 0x80 writes made by the BIOS during the boot process.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define DEVICE_NAME "aspeed-lpc-snoop"
|
|
|
|
#define NUM_SNOOP_CHANNELS 2
|
|
#define SNOOP_FIFO_SIZE 2048
|
|
|
|
#define HICR5 0x0
|
|
#define HICR5_EN_SNP0W BIT(0)
|
|
#define HICR5_ENINT_SNP0W BIT(1)
|
|
#define HICR5_EN_SNP1W BIT(2)
|
|
#define HICR5_ENINT_SNP1W BIT(3)
|
|
|
|
#define HICR6 0x4
|
|
#define HICR6_STR_SNP0W BIT(0)
|
|
#define HICR6_STR_SNP1W BIT(1)
|
|
#define SNPWADR 0x10
|
|
#define SNPWADR_CH0_MASK GENMASK(15, 0)
|
|
#define SNPWADR_CH0_SHIFT 0
|
|
#define SNPWADR_CH1_MASK GENMASK(31, 16)
|
|
#define SNPWADR_CH1_SHIFT 16
|
|
#define SNPWDR 0x14
|
|
#define SNPWDR_CH0_MASK GENMASK(7, 0)
|
|
#define SNPWDR_CH0_SHIFT 0
|
|
#define SNPWDR_CH1_MASK GENMASK(15, 8)
|
|
#define SNPWDR_CH1_SHIFT 8
|
|
#define HICRB 0x80
|
|
#define HICRB_ENSNP0D BIT(14)
|
|
#define HICRB_ENSNP1D BIT(15)
|
|
|
|
struct aspeed_lpc_snoop_model_data {
|
|
/* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500
|
|
* can use them.
|
|
*/
|
|
unsigned int has_hicrb_ensnp;
|
|
};
|
|
|
|
struct aspeed_lpc_snoop_channel {
|
|
struct kfifo fifo;
|
|
wait_queue_head_t wq;
|
|
struct miscdevice miscdev;
|
|
};
|
|
|
|
struct aspeed_lpc_snoop {
|
|
struct regmap *regmap;
|
|
int irq;
|
|
struct aspeed_lpc_snoop_channel chan[NUM_SNOOP_CHANNELS];
|
|
};
|
|
|
|
static struct aspeed_lpc_snoop_channel *snoop_file_to_chan(struct file *file)
|
|
{
|
|
return container_of(file->private_data,
|
|
struct aspeed_lpc_snoop_channel,
|
|
miscdev);
|
|
}
|
|
|
|
static ssize_t snoop_file_read(struct file *file, char __user *buffer,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
|
|
unsigned int copied;
|
|
int ret = 0;
|
|
|
|
if (kfifo_is_empty(&chan->fifo)) {
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return -EAGAIN;
|
|
ret = wait_event_interruptible(chan->wq,
|
|
!kfifo_is_empty(&chan->fifo));
|
|
if (ret == -ERESTARTSYS)
|
|
return -EINTR;
|
|
}
|
|
ret = kfifo_to_user(&chan->fifo, buffer, count, &copied);
|
|
|
|
return ret ? ret : copied;
|
|
}
|
|
|
|
static unsigned int snoop_file_poll(struct file *file,
|
|
struct poll_table_struct *pt)
|
|
{
|
|
struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
|
|
|
|
poll_wait(file, &chan->wq, pt);
|
|
return !kfifo_is_empty(&chan->fifo) ? POLLIN : 0;
|
|
}
|
|
|
|
static const struct file_operations snoop_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = snoop_file_read,
|
|
.poll = snoop_file_poll,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
/* Save a byte to a FIFO and discard the oldest byte if FIFO is full */
|
|
static void put_fifo_with_discard(struct aspeed_lpc_snoop_channel *chan, u8 val)
|
|
{
|
|
if (!kfifo_initialized(&chan->fifo))
|
|
return;
|
|
if (kfifo_is_full(&chan->fifo))
|
|
kfifo_skip(&chan->fifo);
|
|
kfifo_put(&chan->fifo, val);
|
|
wake_up_interruptible(&chan->wq);
|
|
}
|
|
|
|
static irqreturn_t aspeed_lpc_snoop_irq(int irq, void *arg)
|
|
{
|
|
struct aspeed_lpc_snoop *lpc_snoop = arg;
|
|
u32 reg, data;
|
|
|
|
if (regmap_read(lpc_snoop->regmap, HICR6, ®))
|
|
return IRQ_NONE;
|
|
|
|
/* Check if one of the snoop channels is interrupting */
|
|
reg &= (HICR6_STR_SNP0W | HICR6_STR_SNP1W);
|
|
if (!reg)
|
|
return IRQ_NONE;
|
|
|
|
/* Ack pending IRQs */
|
|
regmap_write(lpc_snoop->regmap, HICR6, reg);
|
|
|
|
/* Read and save most recent snoop'ed data byte to FIFO */
|
|
regmap_read(lpc_snoop->regmap, SNPWDR, &data);
|
|
|
|
if (reg & HICR6_STR_SNP0W) {
|
|
u8 val = (data & SNPWDR_CH0_MASK) >> SNPWDR_CH0_SHIFT;
|
|
|
|
put_fifo_with_discard(&lpc_snoop->chan[0], val);
|
|
}
|
|
if (reg & HICR6_STR_SNP1W) {
|
|
u8 val = (data & SNPWDR_CH1_MASK) >> SNPWDR_CH1_SHIFT;
|
|
|
|
put_fifo_with_discard(&lpc_snoop->chan[1], val);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
int rc;
|
|
|
|
lpc_snoop->irq = platform_get_irq(pdev, 0);
|
|
if (!lpc_snoop->irq)
|
|
return -ENODEV;
|
|
|
|
rc = devm_request_irq(dev, lpc_snoop->irq,
|
|
aspeed_lpc_snoop_irq, IRQF_SHARED,
|
|
DEVICE_NAME, lpc_snoop);
|
|
if (rc < 0) {
|
|
dev_warn(dev, "Unable to request IRQ %d\n", lpc_snoop->irq);
|
|
lpc_snoop->irq = 0;
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
|
|
struct device *dev,
|
|
int channel, u16 lpc_port)
|
|
{
|
|
int rc = 0;
|
|
u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en;
|
|
const struct aspeed_lpc_snoop_model_data *model_data =
|
|
of_device_get_match_data(dev);
|
|
|
|
init_waitqueue_head(&lpc_snoop->chan[channel].wq);
|
|
/* Create FIFO datastructure */
|
|
rc = kfifo_alloc(&lpc_snoop->chan[channel].fifo,
|
|
SNOOP_FIFO_SIZE, GFP_KERNEL);
|
|
if (rc)
|
|
return rc;
|
|
|
|
lpc_snoop->chan[channel].miscdev.minor = MISC_DYNAMIC_MINOR;
|
|
lpc_snoop->chan[channel].miscdev.name =
|
|
devm_kasprintf(dev, GFP_KERNEL, "%s%d", DEVICE_NAME, channel);
|
|
lpc_snoop->chan[channel].miscdev.fops = &snoop_fops;
|
|
lpc_snoop->chan[channel].miscdev.parent = dev;
|
|
rc = misc_register(&lpc_snoop->chan[channel].miscdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Enable LPC snoop channel at requested port */
|
|
switch (channel) {
|
|
case 0:
|
|
hicr5_en = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W;
|
|
snpwadr_mask = SNPWADR_CH0_MASK;
|
|
snpwadr_shift = SNPWADR_CH0_SHIFT;
|
|
hicrb_en = HICRB_ENSNP0D;
|
|
break;
|
|
case 1:
|
|
hicr5_en = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W;
|
|
snpwadr_mask = SNPWADR_CH1_MASK;
|
|
snpwadr_shift = SNPWADR_CH1_SHIFT;
|
|
hicrb_en = HICRB_ENSNP1D;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
|
|
regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
|
|
lpc_port << snpwadr_shift);
|
|
if (model_data->has_hicrb_ensnp)
|
|
regmap_update_bits(lpc_snoop->regmap, HICRB,
|
|
hicrb_en, hicrb_en);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
|
|
int channel)
|
|
{
|
|
switch (channel) {
|
|
case 0:
|
|
regmap_update_bits(lpc_snoop->regmap, HICR5,
|
|
HICR5_EN_SNP0W | HICR5_ENINT_SNP0W,
|
|
0);
|
|
break;
|
|
case 1:
|
|
regmap_update_bits(lpc_snoop->regmap, HICR5,
|
|
HICR5_EN_SNP1W | HICR5_ENINT_SNP1W,
|
|
0);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
kfifo_free(&lpc_snoop->chan[channel].fifo);
|
|
misc_deregister(&lpc_snoop->chan[channel].miscdev);
|
|
}
|
|
|
|
static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
|
|
{
|
|
struct aspeed_lpc_snoop *lpc_snoop;
|
|
struct device *dev;
|
|
u32 port;
|
|
int rc;
|
|
|
|
dev = &pdev->dev;
|
|
|
|
lpc_snoop = devm_kzalloc(dev, sizeof(*lpc_snoop), GFP_KERNEL);
|
|
if (!lpc_snoop)
|
|
return -ENOMEM;
|
|
|
|
lpc_snoop->regmap = syscon_node_to_regmap(
|
|
pdev->dev.parent->of_node);
|
|
if (IS_ERR(lpc_snoop->regmap)) {
|
|
dev_err(dev, "Couldn't get regmap\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_set_drvdata(&pdev->dev, lpc_snoop);
|
|
|
|
rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port);
|
|
if (rc) {
|
|
dev_err(dev, "no snoop ports configured\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Configuration of 2nd snoop channel port is optional */
|
|
if (of_property_read_u32_index(dev->of_node, "snoop-ports",
|
|
1, &port) == 0) {
|
|
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
|
|
if (rc)
|
|
aspeed_lpc_disable_snoop(lpc_snoop, 0);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
|
|
{
|
|
struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev);
|
|
|
|
/* Disable both snoop channels */
|
|
aspeed_lpc_disable_snoop(lpc_snoop, 0);
|
|
aspeed_lpc_disable_snoop(lpc_snoop, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
|
|
.has_hicrb_ensnp = 0,
|
|
};
|
|
|
|
static const struct aspeed_lpc_snoop_model_data ast2500_model_data = {
|
|
.has_hicrb_ensnp = 1,
|
|
};
|
|
|
|
static const struct of_device_id aspeed_lpc_snoop_match[] = {
|
|
{ .compatible = "aspeed,ast2400-lpc-snoop",
|
|
.data = &ast2400_model_data },
|
|
{ .compatible = "aspeed,ast2500-lpc-snoop",
|
|
.data = &ast2500_model_data },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver aspeed_lpc_snoop_driver = {
|
|
.driver = {
|
|
.name = DEVICE_NAME,
|
|
.of_match_table = aspeed_lpc_snoop_match,
|
|
},
|
|
.probe = aspeed_lpc_snoop_probe,
|
|
.remove = aspeed_lpc_snoop_remove,
|
|
};
|
|
|
|
module_platform_driver(aspeed_lpc_snoop_driver);
|
|
|
|
MODULE_DEVICE_TABLE(of, aspeed_lpc_snoop_match);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Robert Lippert <rlippert@google.com>");
|
|
MODULE_DESCRIPTION("Linux driver to control Aspeed LPC snoop functionality");
|