linux/drivers/usb
Adam Thomson 554fab6dbf usb: typec: tcpm: Report back negotiated PPS voltage and current
Currently when requesting a specific voltage or current through
the psy interface, for PPS, when reading back from that interface
the values will always be the same as previously given, if the
request was successful. However PPS only allows for 20mV voltage
steps and 50mA current steps, and the psy class expects microvolt
and micro amp requests, so inbetween values can be provided through
this interface. Really when reading back the true values negotiated
should be given, and not the ones originally asked for.

To report the actual values negotiated with the Source, the values
stored are now rounded down to the relevant step units prior to
building the PPS request, so that those values are later correctly
reported through the psy interface. In addition this improves the
adjustments made to meet the operating power requirements of the
platform, which previously could have been slightly out due to not
using valid PPS units of voltage and current.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09 16:05:41 +02:00
..
atm
c67x00
chipidea usb: chipidea: Fix otg event handler 2018-09-20 17:04:22 +08:00
class Merge 4.19-rc7 into usb-next 2018-10-08 15:40:42 +02:00
common usb: roles: Take care of driver module reference counting 2018-09-20 13:20:24 +02:00
core USB: core: remove set but not used variable 'udev' 2018-10-09 16:02:29 +02:00
dwc2 usb: dwc2: disable power_down on rockchip devices 2018-10-05 10:50:14 +03:00
dwc3 usb: dwc3: Fix spelling of 'optimizations' 2018-10-02 10:43:51 +03:00
early
gadget USB: net2280: Remove ->disconnect() callback from net2280_pullup() 2018-10-05 10:50:23 +03:00
host Merge 4.19-rc7 into usb-next 2018-10-08 15:40:42 +02:00
image
isp1760 usb: isp1760: remove redundant variable 'selector' 2018-07-13 15:41:56 +02:00
misc Merge 4.19-rc4 into usb-next 2018-09-16 22:44:14 +02:00
mon USB: mon: use ktime_get_real_ts64 instead of getnstimeofday64 2018-06-25 21:58:26 +08:00
mtu3 usb: mtu3: disable vbus rise/fall interrupts of ltssm 2018-10-02 10:39:02 +03:00
musb usb: musb: dsps: do not disable CPPI41 irq in driver teardown 2018-09-20 12:40:14 +02:00
phy usb: phy: mxs: fix spelling mistake "stardard" -> "standard" 2018-10-02 10:31:23 +03:00
renesas_usbhs usb: renesas_usbhs: add support for R-Car E3 2018-10-02 10:48:08 +03:00
roles usb: roles: intel_xhci: Enable runtime PM 2018-05-24 18:17:00 +02:00
serial USB: serial: simple: add Motorola Tetra MTP6550 id 2018-09-24 15:30:16 +02:00
storage USB: STORAGE: ISD200 Fixed coding style issue "space required in for loop" 2018-09-20 15:10:29 +02:00
typec usb: typec: tcpm: Report back negotiated PPS voltage and current 2018-10-09 16:05:41 +02:00
usbip usb: usbip: remove redundant pointer ep 2018-07-13 15:41:55 +02:00
wusbcore USB: wusbcore: Switch to bitmap_zalloc() 2018-09-10 20:08:21 +02:00
Kconfig usb: select USB_COMMON for usb role switch config 2018-04-22 15:23:37 +02:00
Makefile
README
usb-skeleton.c usb: usb-skeleton: use irqsave() in USB's complete callback 2018-06-28 19:36:06 +09:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.