forked from Minki/linux
838a2ae80a
The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brown <davidb@codeaurora.org> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Barry Song <baohua.song@csr.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
242 lines
5.3 KiB
C
242 lines
5.3 KiB
C
/*
|
|
* linux/arch/arm/mach-mmp/time.c
|
|
*
|
|
* Support for clocksource and clockevents
|
|
*
|
|
* Copyright (C) 2008 Marvell International Ltd.
|
|
* All rights reserved.
|
|
*
|
|
* 2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
|
|
* 2008-10-08: Bin Yang <bin.yang@marvell.com>
|
|
*
|
|
* The timers module actually includes three timers, each timer with up to
|
|
* three match comparators. Timer #0 is used here in free-running mode as
|
|
* the clock source, and match comparator #1 used as clock event device.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clockchips.h>
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <asm/sched_clock.h>
|
|
#include <mach/addr-map.h>
|
|
#include <mach/regs-timers.h>
|
|
#include <mach/regs-apbc.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/cputype.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "clock.h"
|
|
|
|
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
|
|
|
|
#define MAX_DELTA (0xfffffffe)
|
|
#define MIN_DELTA (16)
|
|
|
|
static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
|
|
|
|
/*
|
|
* FIXME: the timer needs some delay to stablize the counter capture
|
|
*/
|
|
static inline uint32_t timer_read(void)
|
|
{
|
|
int delay = 100;
|
|
|
|
__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
|
|
|
|
while (delay--)
|
|
cpu_relax();
|
|
|
|
return __raw_readl(mmp_timer_base + TMR_CVWR(1));
|
|
}
|
|
|
|
static u32 notrace mmp_read_sched_clock(void)
|
|
{
|
|
return timer_read();
|
|
}
|
|
|
|
static irqreturn_t timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *c = dev_id;
|
|
|
|
/*
|
|
* Clear pending interrupt status.
|
|
*/
|
|
__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
|
|
|
|
/*
|
|
* Disable timer 0.
|
|
*/
|
|
__raw_writel(0x02, mmp_timer_base + TMR_CER);
|
|
|
|
c->event_handler(c);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int timer_set_next_event(unsigned long delta,
|
|
struct clock_event_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/*
|
|
* Disable timer 0.
|
|
*/
|
|
__raw_writel(0x02, mmp_timer_base + TMR_CER);
|
|
|
|
/*
|
|
* Clear and enable timer match 0 interrupt.
|
|
*/
|
|
__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
|
|
__raw_writel(0x01, mmp_timer_base + TMR_IER(0));
|
|
|
|
/*
|
|
* Setup new clockevent timer value.
|
|
*/
|
|
__raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0));
|
|
|
|
/*
|
|
* Enable timer 0.
|
|
*/
|
|
__raw_writel(0x03, mmp_timer_base + TMR_CER);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void timer_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
/* disable the matching interrupt */
|
|
__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
|
|
break;
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
case CLOCK_EVT_MODE_PERIODIC:
|
|
break;
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static struct clock_event_device ckevt = {
|
|
.name = "clockevent",
|
|
.features = CLOCK_EVT_FEAT_ONESHOT,
|
|
.rating = 200,
|
|
.set_next_event = timer_set_next_event,
|
|
.set_mode = timer_set_mode,
|
|
};
|
|
|
|
static cycle_t clksrc_read(struct clocksource *cs)
|
|
{
|
|
return timer_read();
|
|
}
|
|
|
|
static struct clocksource cksrc = {
|
|
.name = "clocksource",
|
|
.rating = 200,
|
|
.read = clksrc_read,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
static void __init timer_config(void)
|
|
{
|
|
uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
|
|
|
|
__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
|
|
|
|
ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
|
|
(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
|
|
__raw_writel(ccr, mmp_timer_base + TMR_CCR);
|
|
|
|
/* set timer 0 to periodic mode, and timer 1 to free-running mode */
|
|
__raw_writel(0x2, mmp_timer_base + TMR_CMR);
|
|
|
|
__raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */
|
|
__raw_writel(0x7, mmp_timer_base + TMR_ICR(0)); /* clear status */
|
|
__raw_writel(0x0, mmp_timer_base + TMR_IER(0));
|
|
|
|
__raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */
|
|
__raw_writel(0x7, mmp_timer_base + TMR_ICR(1)); /* clear status */
|
|
__raw_writel(0x0, mmp_timer_base + TMR_IER(1));
|
|
|
|
/* enable timer 1 counter */
|
|
__raw_writel(0x2, mmp_timer_base + TMR_CER);
|
|
}
|
|
|
|
static struct irqaction timer_irq = {
|
|
.name = "timer",
|
|
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
|
.handler = timer_interrupt,
|
|
.dev_id = &ckevt,
|
|
};
|
|
|
|
void __init timer_init(int irq)
|
|
{
|
|
timer_config();
|
|
|
|
setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
|
|
|
|
ckevt.cpumask = cpumask_of(0);
|
|
|
|
setup_irq(irq, &timer_irq);
|
|
|
|
clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
|
|
clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
|
|
MIN_DELTA, MAX_DELTA);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct of_device_id mmp_timer_dt_ids[] = {
|
|
{ .compatible = "mrvl,mmp-timer", },
|
|
{}
|
|
};
|
|
|
|
void __init mmp_dt_init_timer(void)
|
|
{
|
|
struct device_node *np;
|
|
int irq, ret;
|
|
|
|
np = of_find_matching_node(NULL, mmp_timer_dt_ids);
|
|
if (!np) {
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
if (!irq) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
mmp_timer_base = of_iomap(np, 0);
|
|
if (!mmp_timer_base) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
timer_init(irq);
|
|
return;
|
|
out:
|
|
pr_err("Failed to get timer from device tree with error:%d\n", ret);
|
|
}
|
|
#endif
|