.. |
include
|
|
|
aks-cdu.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
am33xx-clocks.dtsi
|
ARM: dts: am33xx clock data
|
2014-01-17 12:36:35 -08:00 |
am33xx.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
am35xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
am43x-epos-evm.dts
|
ARM: dts: am43x-epos-evm: add SD card hotplug support
|
2014-03-05 11:53:36 -08:00 |
am43xx-clocks.dtsi
|
ARM: dts: am43xx clock data
|
2014-01-17 12:36:52 -08:00 |
am335x-base0033.dts
|
ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
|
2013-11-26 15:03:38 -08:00 |
am335x-bone-common.dtsi
|
ARM: dts: am335x-bone-common: correct mux mode for cmd line
|
2013-10-11 21:06:38 +02:00 |
am335x-bone.dts
|
ARM: dts: AM33XX: Add AES data and documentation
|
2013-10-11 21:06:40 +02:00 |
am335x-boneblack.dts
|
ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display
|
2013-10-11 21:06:42 +02:00 |
am335x-evm.dts
|
ARM: dts: am335x-evm: add SD card hotplug support
|
2014-03-05 11:53:36 -08:00 |
am335x-evmsk.dts
|
Merge branch '3.15/dss-dt-dts' into 3.15/fbdev
|
2014-03-20 08:18:27 +02:00 |
am335x-igep0033.dtsi
|
ARM: dts: AM33XX IGEP0033: add USB support
|
2013-11-26 15:03:39 -08:00 |
am335x-nano.dts
|
ARM: dts: Add support for Newflow NanoBone board
|
2013-10-22 14:56:33 +02:00 |
am437x-gp-evm.dts
|
ARM: dts: am437x gp-evm: add sd card dt nodes
|
2014-03-05 11:53:36 -08:00 |
am3517_mt_ventoux.dts
|
ARM: dts: AM3XXX: Use #include for all device trees
|
2013-06-18 18:53:41 -05:00 |
am3517-craneboard.dts
|
ARM: dts: Add basic devices for AM3517-craneboard
|
2014-03-02 18:34:14 +01:00 |
am3517-evm.dts
|
ARM: dts: Add basic devices on am3517-evm
|
2013-12-08 14:15:46 -08:00 |
am3517.dtsi
|
ARM: dts: AM35xx: use DT clock data
|
2014-01-17 12:36:49 -08:00 |
am4372.dtsi
|
ARM: dts: am43x-epos-evm: add SD card hotplug support
|
2014-03-05 11:53:36 -08:00 |
animeo_ip.dts
|
ARM: at91: Animeo IP: fix mtd partition table
|
2013-12-09 11:10:13 +01:00 |
armada-38x.dtsi
|
ARM: mvebu: Add support for NAND controller in Armada 38x SoC
|
2014-03-13 23:37:16 +00:00 |
armada-370-db.dts
|
ARM: mvebu: enable S/PDIF audio in Armada 370 DB Device Tree
|
2014-02-17 02:42:39 +00:00 |
armada-370-mirabox.dts
|
ARM: mvebu: use GPIO DT defines in Armada 370/XP boards
|
2014-02-11 19:35:30 +00:00 |
armada-370-netgear-rn102.dts
|
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file
|
2013-12-20 03:13:56 +00:00 |
armada-370-netgear-rn104.dts
|
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file
|
2013-12-20 03:13:57 +00:00 |
armada-370-rd.dts
|
ARM: mvebu: use input DT defines in Armada 370/XP boards
|
2014-02-11 19:35:39 +00:00 |
armada-370-xp.dtsi
|
ARM: mvebu: change the default PCIe apertures for Armada 370/XP
|
2014-03-06 19:59:37 +00:00 |
armada-370.dtsi
|
ARM: mvebu: Enable Armada 370/XP watchdog in the devicetree
|
2014-02-17 21:44:08 +00:00 |
armada-375-db.dts
|
ARM: mvebu: add Device Tree for the Armada 375 DB board
|
2014-02-17 22:50:09 +00:00 |
armada-375.dtsi
|
ARM: mvebu: use macros for interrupt flags on Armada 375/38x
|
2014-02-22 04:11:03 +00:00 |
armada-380.dtsi
|
ARM: mvebu: use macros for interrupt flags on Armada 375/38x
|
2014-02-22 04:11:03 +00:00 |
armada-385-db.dts
|
ARM: mvebu: Enable NAND controller in Armada 385-DB
|
2014-03-13 23:37:17 +00:00 |
armada-385-rd.dts
|
ARM: mvebu: add Device Tree for the Armada 385 RD board
|
2014-03-06 20:10:12 +00:00 |
armada-385.dtsi
|
ARM: mvebu: use macros for interrupt flags on Armada 375/38x
|
2014-02-22 04:11:03 +00:00 |
armada-xp-axpwifiap.dts
|
ARM: mvebu: use input DT defines in Armada 370/XP boards
|
2014-02-11 19:35:39 +00:00 |
armada-xp-db.dts
|
ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000
|
2014-03-06 19:59:37 +00:00 |
armada-xp-gp.dts
|
ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000
|
2014-03-06 19:59:37 +00:00 |
armada-xp-matrix.dts
|
ARM: mvebu: the Armada XP Matrix board has 4 GB
|
2014-03-06 19:59:38 +00:00 |
armada-xp-mv78230.dtsi
|
ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
|
2013-11-23 15:29:06 +00:00 |
armada-xp-mv78260.dtsi
|
ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260
|
2014-02-05 02:30:22 +00:00 |
armada-xp-mv78460.dtsi
|
ARM: mvebu: link PCIe controllers to the MSI controller
|
2013-09-30 15:00:27 +00:00 |
armada-xp-netgear-rn2120.dts
|
ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file
|
2013-12-20 03:13:57 +00:00 |
armada-xp-openblocks-ax3-4.dts
|
ARM: mvebu: use input DT defines in Armada 370/XP boards
|
2014-02-11 19:35:39 +00:00 |
armada-xp.dtsi
|
ARM: mvebu: Enable Armada 370/XP watchdog in the devicetree
|
2014-02-17 21:44:08 +00:00 |
armv7-m.dtsi
|
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
|
2013-12-16 17:51:34 +01:00 |
at91-ariag25.dts
|
ARM: at91/dt: at91-ariag25: remove useless adc properties
|
2014-03-12 19:11:28 +01:00 |
at91-cosino_mega2560.dts
|
ARM: at91/dt: at91-cosino: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
at91-cosino.dtsi
|
ARM: at91/dt: at91-cosino: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
at91-foxg20.dts
|
ARM: at91: switch Fox G20 board .dts to pre-processor defines
|
2013-05-31 16:42:28 +02:00 |
at91-qil_a9260.dts
|
ARM: at91: switch Calao QIL-A9260 board to DT
|
2013-12-19 17:27:30 +01:00 |
at91-sama5d3_xplained.dts
|
ARM: at91: add Atmel's SAMA5D3 Xplained board
|
2014-02-07 17:20:39 +01:00 |
at91rm9200_pqfp.dtsi
|
ARM: at91/dt: add at91rm9200 PQFP package version
|
2013-08-21 12:18:52 +02:00 |
at91rm9200.dtsi
|
ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions
|
2013-12-09 11:07:15 +01:00 |
at91rm9200ek.dts
|
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
|
2013-12-09 15:08:57 +01:00 |
at91sam9g15.dtsi
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
at91sam9g15ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
at91sam9g20.dtsi
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
at91sam9g20ek_2mmc.dts
|
ARM: at91: dt: switch to pinctrl to pre-processor
|
2013-05-17 12:11:39 +02:00 |
at91sam9g20ek_common.dtsi
|
ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek
|
2013-10-18 16:50:13 +02:00 |
at91sam9g20ek.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
at91sam9g25.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9g25ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
at91sam9g35.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9g35ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
at91sam9g45.dtsi
|
ARM: at91/dt: at91sam9g45: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
at91sam9m10g45ek.dts
|
ARM: at91: at91sam9m10g45ek: switch to PWM leds
|
2013-12-19 23:00:05 +01:00 |
at91sam9n12.dtsi
|
ARM: at91/DT: add NAND + DMA property
|
2014-03-10 16:53:50 +01:00 |
at91sam9n12ek.dts
|
ARM: at91: enable USB host on at91sam9n12ek board
|
2014-02-07 17:20:38 +01:00 |
at91sam9rl.dtsi
|
ARM: at91/dt: define at91sam9rl clocks
|
2014-03-12 11:30:59 +01:00 |
at91sam9rlek.dts
|
ARM: at91/dt: define main clk frequency of at91sam9rlek
|
2014-03-12 11:31:05 +01:00 |
at91sam9x5_macb0.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9x5_macb1.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9x5_usart3.dtsi
|
ARM: at91: add usart3 alias to dtsi
|
2013-12-02 14:14:53 +01:00 |
at91sam9x5.dtsi
|
ARM: at91/dt: at91sam9x5: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
at91sam9x5cm.dtsi
|
ARM: at91: dt: switch to pinctrl to pre-processor
|
2013-05-17 12:11:39 +02:00 |
at91sam9x5ek.dtsi
|
ARM: SoC DT updates for 3.12
|
2013-09-06 13:26:27 -07:00 |
at91sam9x25.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9x25ek.dts
|
Adding the DT support to USB gadget High-Speed aka usba.
|
2013-06-14 18:58:28 -07:00 |
at91sam9x35.dtsi
|
ARM: at91/dt: split sam9x5 peripheral definitions
|
2013-10-16 15:47:07 +02:00 |
at91sam9x35ek.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
at91sam9260.dtsi
|
ARM: at91/dt: at91sam9260: remove useless adc properties
|
2014-03-12 19:11:28 +01:00 |
at91sam9261.dtsi
|
ARM: at91: dt: Add at91sam9261 dt SoC support
|
2014-03-12 14:30:22 +01:00 |
at91sam9261ek.dts
|
ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
|
2014-03-12 14:36:14 +01:00 |
at91sam9263.dtsi
|
ARM: at91/dt: sam9263: fix compatibility string for the I2C
|
2014-02-07 17:20:37 +01:00 |
at91sam9263ek.dts
|
ARM: at91: sam9263ek: add dt lcd support
|
2013-12-09 11:10:10 +01:00 |
atlas6-evb.dts
|
|
|
atlas6.dtsi
|
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
|
2014-04-10 08:55:08 -07:00 |
bcm2835-rpi-b.dts
|
ARM: bcm2835: add USB controller to device tree
|
2014-01-02 12:08:03 -08:00 |
bcm2835.dtsi
|
ARM: bcm2835: fix clock DT node names
|
2014-02-24 19:40:27 -07:00 |
bcm4708-netgear-r6250.dts
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm4708.dtsi
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm5301x.dtsi
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm11351.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
bcm21664-garnet.dts
|
ARM: dts: bcm21664: Add device tree files.
|
2014-03-14 12:22:37 -04:00 |
bcm21664.dtsi
|
ARM: dts: bcm21664: Add device tree files.
|
2014-03-14 12:22:37 -04:00 |
bcm28155-ap.dts
|
ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
|
2014-03-14 12:22:39 -04:00 |
bcm59056.dtsi
|
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
|
2014-03-14 12:22:38 -04:00 |
berlin2-sony-nsz-gs7.dts
|
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
|
2013-12-13 16:31:05 +01:00 |
berlin2.dtsi
|
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
|
2013-12-13 16:31:05 +01:00 |
berlin2cd-google-chromecast.dts
|
ARM: add Armada 1500-mini and Chromecast device tree files
|
2013-12-13 16:31:06 +01:00 |
berlin2cd.dtsi
|
ARM: add Armada 1500-mini and Chromecast device tree files
|
2013-12-13 16:31:06 +01:00 |
da850-enbw-cmc.dts
|
ARM: davinci: da850: Use #include for all device trees
|
2013-06-20 15:04:30 +05:30 |
da850-evm.dts
|
ARM: davinci: da850 evm: add GPIO pinumux entries DT node
|
2013-12-15 18:40:49 +05:30 |
da850.dtsi
|
ARM: davinci: da850: add GPIO DT node
|
2013-12-15 18:35:37 +05:30 |
dove-cm-a510.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
dove-cubox.dts
|
ARM: mvebu: dts: remove unneeded linux,default-state from led nodes
|
2013-11-23 17:34:40 +00:00 |
dove-d2plug.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
dove-d3plug.dts
|
ARM: dove: add initial DT file for Globalscale D3Plug
|
2013-09-30 15:00:54 +00:00 |
dove-dove-db.dts
|
ARM: dove: use preprocessor on device tree files
|
2013-09-30 15:00:35 +00:00 |
dove.dtsi
|
ARM: dove: drop pinctrl PMU reg property
|
2014-03-06 20:20:33 +00:00 |
dra7-evm.dts
|
ARM: dts: dra7-evm: add smps123 supply for CPU
|
2013-10-22 17:33:17 +02:00 |
dra7.dtsi
|
MMC highlights for 3.15:
|
2014-04-09 08:39:39 -07:00 |
dra7xx-clocks.dtsi
|
ARM: dts: DRA7: Add PCIe related clock nodes
|
2014-01-17 12:36:31 -08:00 |
ea3250.dts
|
|
|
ecx-2000.dts
|
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
|
2013-11-04 17:01:05 -06:00 |
ecx-common.dtsi
|
EDAC updates for 3.13
|
2013-11-18 14:50:17 -08:00 |
efm32gg-dk3750.dts
|
ARM: efm32: properly namespace i2c location property
|
2014-03-14 16:04:30 +01:00 |
efm32gg.dtsi
|
ARM: efm32: fix unit address part in USART2 device nodes' names
|
2014-03-14 16:04:15 +01:00 |
elpida_ecb240abacn.dtsi
|
|
|
emev2-kzm9d.dts
|
ARM: shmobile: emev2: Use interrupt macros in DT files
|
2013-12-10 17:27:20 +09:00 |
emev2.dtsi
|
ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
|
2013-12-10 17:27:21 +09:00 |
ethernut5.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
evk-pro3.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
exynos4.dtsi
|
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
|
2014-04-08 09:52:16 -07:00 |
exynos4x12-pinctrl.dtsi
|
ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals
|
2013-08-06 02:49:43 +09:00 |
exynos4x12.dtsi
|
ARM: dts: Move common dt data for interrupt combiner controller for exynos4x12
|
2014-03-18 06:25:59 +09:00 |
exynos5.dtsi
|
ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
|
2014-02-24 08:49:50 +09:00 |
exynos4210-origen.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4210-pinctrl.dtsi
|
ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes
|
2013-08-07 01:08:24 +09:00 |
exynos4210-smdkv310.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4210-trats.dts
|
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
|
2014-04-08 09:52:16 -07:00 |
exynos4210-universal_c210.dts
|
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
|
2014-04-08 09:52:16 -07:00 |
exynos4210.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4212.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4412-odroidx.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4412-origen.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4412-smdk4412.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4412-tiny4412.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4412-trats2.dts
|
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
|
2014-04-08 09:52:16 -07:00 |
exynos4412.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5250-arndale.dts
|
ARM: SoC: late cleanups
|
2014-04-05 15:46:37 -07:00 |
exynos5250-cros-common.dtsi
|
The first half of the clk framework pull request is made up almost
|
2014-01-23 18:56:08 -08:00 |
exynos5250-pinctrl.dtsi
|
ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
|
2013-10-16 07:23:42 +09:00 |
exynos5250-smdk5250.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5250-snow.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5250.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5420-arndale-octa.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5420-pinctrl.dtsi
|
ARM: dts: Fix a typo in exynos5420-pinctrl.dtsi
|
2013-12-12 06:58:37 +09:00 |
exynos5420-smdk5420.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5420.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5440-sd5v1.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos5440-ssdk5440.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos5440.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
ge863-pro3.dtsi
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
hi3620-hi4511.dts
|
ARM: dts: rename hi4511 dts file
|
2013-12-20 08:23:01 -08:00 |
hi3620.dtsi
|
ARM: dts: enable clock binding on Hi3620
|
2013-12-17 16:43:35 -08:00 |
highbank.dts
|
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
|
2013-11-04 17:01:05 -06:00 |
imx6dl-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
imx6dl-dfi-fs700-m60.dts
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6dl-gw51xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-gw52xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-gw53xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-gw54xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-hummingboard.dts
|
ARM: dts: fix spdif pinmux configuration
|
2014-02-08 21:18:24 +00:00 |
imx6dl-nitrogen6x.dts
|
ARM: dts: imx: add nitrogen6x board
|
2014-02-09 21:29:32 +08:00 |
imx6dl-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
|
2014-02-09 21:29:44 +08:00 |
imx6dl-sabreauto.dts
|
ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
2013-08-22 23:29:11 +08:00 |
imx6dl-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
imx6dl-sabresd.dts
|
ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
2013-08-22 23:29:11 +08:00 |
imx6dl-wandboard.dts
|
ARM: dts: imx6: Add support for imx6q wandboard
|
2013-08-22 23:29:28 +08:00 |
imx6dl.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx6q-arm2.dts
|
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
|
2014-02-10 16:27:27 +08:00 |
imx6q-cm-fx6.dts
|
ARM: dts: Add initial support for cm-fx6.
|
2014-02-09 21:28:55 +08:00 |
imx6q-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
imx6q-dfi-fs700-m60.dts
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6q-dmo-edmqmx6.dts
|
ARM: dts: imx6: edmqmx6: add second STMPE
|
2014-04-14 10:22:38 +08:00 |
imx6q-gk802.dts
|
ARM: dts: imx6q: Add support for Zealz GK802
|
2014-02-10 16:27:41 +08:00 |
imx6q-gw51xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw52xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw53xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw54xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw5400-a.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-nitrogen6x.dts
|
ARM: dts: imx: add nitrogen6x board
|
2014-02-09 21:29:32 +08:00 |
imx6q-phytec-pbab01.dts
|
ARM: dts: imx6q-phytec: Added SATA Support
|
2014-02-21 10:14:02 +08:00 |
imx6q-phytec-pfla02.dtsi
|
ARM: dts: imx6q-phytec: Added GPMI-NAND Support
|
2014-02-21 10:13:58 +08:00 |
imx6q-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
|
2014-02-09 21:29:44 +08:00 |
imx6q-sabreauto.dts
|
ARM: dtsi: enable ahci sata on imx6q platforms
|
2013-08-22 23:29:25 +08:00 |
imx6q-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
imx6q-sabresd.dts
|
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:59 +00:00 |
imx6q-sbc6x.dts
|
ARM: dts: imx6qdl: make pinctrl nodes board specific
|
2014-02-09 21:28:56 +08:00 |
imx6q-udoo.dts
|
ARM: dts: imx6q-udoo: Add Ethernet support
|
2014-02-09 21:29:02 +08:00 |
imx6q-wandboard.dts
|
ARM: dts: imx6q-wandboard: Add sata support
|
2013-08-22 23:29:30 +08:00 |
imx6q.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx6qdl-cubox-i.dtsi
|
ARM: dts: fix spdif pinmux configuration
|
2014-02-08 21:18:24 +00:00 |
imx6qdl-dfi-fs700-m60.dtsi
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6qdl-gw51xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6qdl-gw52xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6qdl-gw53xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6qdl-gw54xx.dtsi
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6qdl-microsom-ar8035.dtsi
|
ARM: dt: microsom: don't set bit 7 for ethernet mux settings
|
2014-04-14 10:22:37 +08:00 |
imx6qdl-microsom.dtsi
|
ARM: imx: initial SolidRun HummingBoard support
|
2014-01-27 14:18:09 +00:00 |
imx6qdl-nitrogen6x.dtsi
|
ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
|
2014-02-10 16:25:00 +08:00 |
imx6qdl-sabreauto.dtsi
|
ARM: dts: imx6qdl-sabreauto: Support debug LED
|
2014-02-20 09:38:07 +08:00 |
imx6qdl-sabrelite.dtsi
|
ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
|
2014-02-10 16:25:00 +08:00 |
imx6qdl-sabresd.dtsi
|
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:59 +00:00 |
imx6qdl-wandboard.dtsi
|
ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt
|
2014-02-10 16:28:05 +08:00 |
imx6qdl.dtsi
|
ARM: dts: imx: drop invalid size and address cells properties
|
2014-04-14 10:22:37 +08:00 |
imx6sl-evk.dts
|
ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled
|
2014-02-20 09:39:01 +08:00 |
imx6sl-pinfunc.h
|
|
|
imx6sl.dtsi
|
ARM: dts: imx: drop invalid size and address cells properties
|
2014-04-14 10:22:37 +08:00 |
imx23-evk.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23-olinuxino.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
imx23-stmp378x_devb.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23.dtsi
|
ARM: dts: mxs: add mxs phy controller id
|
2014-02-09 21:33:36 +08:00 |
imx25-eukrea-cpuimx25.dtsi
|
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
|
2014-02-09 21:33:21 +08:00 |
imx25-eukrea-mbimxsd25-baseboard.dts
|
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
|
2014-02-09 21:33:21 +08:00 |
imx25-karo-tx25.dts
|
|
|
imx25-pdk.dts
|
|
|
imx25-pinfunc.h
|
ARM: dts: imx25: Add pinctrl functions.
|
2014-02-09 21:32:31 +08:00 |
imx25.dtsi
|
ARM: dts: imx25.dtsi: label the iomuxc.
|
2014-02-09 21:32:32 +08:00 |
imx27-apf27.dts
|
ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1
|
2014-02-09 21:33:03 +08:00 |
imx27-apf27dev.dts
|
ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys
|
2014-02-09 21:33:14 +08:00 |
imx27-pdk.dts
|
|
|
imx27-phytec-phycard-s-rdk.dts
|
ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
|
2014-02-13 09:57:32 +08:00 |
imx27-phytec-phycard-s-som.dtsi
|
ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
|
2014-02-13 09:57:32 +08:00 |
imx27-phytec-phycore-rdk.dts
|
ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node
|
2014-02-24 11:05:05 +08:00 |
imx27-phytec-phycore-som.dtsi
|
ARM: dts: imx27-phytec-phycore-som: Add USBOTG node
|
2014-02-24 11:05:09 +08:00 |
imx27-pinfunc.h
|
ARM: dts: i.MX27: Configure GPIOs as "input" by default
|
2014-02-09 21:33:15 +08:00 |
imx27.dtsi
|
ARM: dts: i.MX27: Add USB nodes
|
2014-02-24 11:04:50 +08:00 |
imx28-apf28.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers
|
2013-09-26 13:01:36 +08:00 |
imx28-apf28dev.dts
|
ARM: dts: imx28-apf28dev: add user button
|
2014-02-09 21:33:45 +08:00 |
imx28-apx4devkit.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx28-cfa10036.dts
|
ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT
|
2014-02-09 21:32:48 +08:00 |
imx28-cfa10037.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10049.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10055.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
imx28-cfa10056.dts
|
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
|
2013-09-26 13:01:37 +08:00 |
imx28-cfa10057.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10058.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-duckbill.dts
|
ARM: mxs: add support for I2SE's duckbill series
|
2014-02-09 21:32:33 +08:00 |
imx28-eukrea-mbmx28lc.dtsi
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-eukrea-mbmx283lc.dts
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-eukrea-mbmx287lc.dts
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-evk.dts
|
ARM: dts: imx28-evk: Run I2C0 at 400kHz
|
2014-02-09 21:33:00 +08:00 |
imx28-m28cu3.dts
|
ARM: dts: imx28-m28cu3: Remove 'reset-active-high'
|
2014-02-09 21:33:52 +08:00 |
imx28-m28evk.dts
|
ARM: dts: mxs: Fix the RTC compatible prop on M28EVK
|
2014-02-21 10:08:43 +08:00 |
imx28-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
imx28-sps1.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-tx28.dts
|
ARM: dts: imx28-tx28: Remove 'enable-active-low' property
|
2014-02-10 11:19:43 +08:00 |
imx28.dtsi
|
ARM: dts: mxs: add mxs phy controller id
|
2014-02-09 21:33:36 +08:00 |
imx31-bug.dts
|
|
|
imx31.dtsi
|
ARM: dts: imx: Add the missing cpus node
|
2013-08-22 23:29:01 +08:00 |
imx35-eukrea-cpuimx35.dtsi
|
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
|
2014-02-09 21:33:46 +08:00 |
imx35-eukrea-mbimxsd35-baseboard.dts
|
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
|
2014-02-09 21:33:46 +08:00 |
imx35-pinfunc.h
|
|
|
imx35.dtsi
|
ARM: dts: Add support for the i.MX35.
|
2014-02-09 21:33:29 +08:00 |
imx50-evk.dts
|
ARM: dts: imx: add device tree support for Freescale imx50evk board
|
2014-02-09 21:32:21 +08:00 |
imx50-pinfunc.h
|
ARM: dts: imx: add device tree pin definitions for the IMX50
|
2014-02-09 21:32:18 +08:00 |
imx50.dtsi
|
ARM: dts: imx5: use imx51-ssi
|
2014-02-09 21:33:51 +08:00 |
imx51-apf51.dts
|
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
|
2014-02-09 21:32:51 +08:00 |
imx51-apf51dev.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx51-babbage.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx51-eukrea-cpuimx51.dtsi
|
ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.
|
2014-02-09 21:32:17 +08:00 |
imx51-eukrea-mbimxsd51-baseboard.dts
|
ARM: dts: Add support for the cpuimx51 board from Eukrea and its baseboard.
|
2014-02-09 21:32:17 +08:00 |
imx51-pinfunc.h
|
|
|
imx51.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx53-ard.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx53-m53evk.dts
|
ARM: dts: mx5: fix wrong stmpe-ts bindings
|
2014-04-14 10:22:37 +08:00 |
imx53-mba53.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx53-pinfunc.h
|
|
|
imx53-qsb-common.dtsi
|
ARM: dts: imx53-qsb-common: Fix memory region description
|
2014-04-14 10:22:37 +08:00 |
imx53-qsb.dts
|
ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:58 +00:00 |
imx53-qsrb.dts
|
ARM: dts: i.MX53: add support for MCIMX53-START-R
|
2014-02-09 21:33:43 +08:00 |
imx53-smd.dts
|
ARM: dts: imx53: make pinctrl nodes board specific
|
2014-02-09 21:32:25 +08:00 |
imx53-tqma53.dtsi
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx53-tx53-x03x.dts
|
ARM: dts: imx53: add support for Ka-Ro TX53 modules
|
2014-02-09 21:33:48 +08:00 |
imx53-tx53-x13x.dts
|
ARM: dts: imx53: add support for Ka-Ro TX53 modules
|
2014-02-09 21:33:48 +08:00 |
imx53-tx53.dtsi
|
ARM: dts: mx53: Remove 'enable-active-low' property
|
2014-02-10 11:19:36 +08:00 |
imx53-voipac-bsb.dts
|
ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
|
2014-02-09 21:32:24 +08:00 |
imx53-voipac-dmm-668.dtsi
|
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
|
2014-02-09 21:32:23 +08:00 |
imx53.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
integrator.dtsi
|
ARM: integrator: move EBI to the device tree
|
2013-12-04 16:22:31 +01:00 |
integratorap.dts
|
ARM: integrator: define clocks in the device trees
|
2014-02-13 11:20:31 +01:00 |
integratorcp.dts
|
ARM: integrator: define clocks in the device trees
|
2014-02-13 11:20:31 +01:00 |
k2e-clocks.dtsi
|
ARM: dts: keystone: add support for k2 Edison SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
k2e-evm.dts
|
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
|
2014-03-20 17:00:27 -04:00 |
k2e.dtsi
|
ARM: dts: keystone: add support for k2 Edison SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
k2hk-clocks.dtsi
|
ARM: dts: keystone: Fix control register range for clktsip
|
2014-03-18 15:59:26 -04:00 |
k2hk-evm.dts
|
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
|
2014-03-20 17:00:27 -04:00 |
k2hk.dtsi
|
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
|
2014-02-26 10:06:56 -05:00 |
k2l-clocks.dtsi
|
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
k2l-evm.dts
|
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
|
2014-03-20 17:00:27 -04:00 |
k2l.dtsi
|
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
keystone-clocks.dtsi
|
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
|
2014-02-26 10:06:56 -05:00 |
keystone.dtsi
|
ARM: dts: keystone: add AEMIF/NAND device entry
|
2014-02-28 21:05:24 -05:00 |
kirkwood-98dx4122.dtsi
|
|
|
kirkwood-6192.dtsi
|
ARM: Kirkwood: Add 6192 DTSI file
|
2013-12-25 02:03:36 +00:00 |
kirkwood-6281.dtsi
|
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
|
2013-12-22 17:19:36 +00:00 |
kirkwood-6282.dtsi
|
ARM: kirkwood: 6282: sort DT nodes by address
|
2013-12-22 17:20:00 +00:00 |
kirkwood-b3.dts
|
ARM: Kirkwood: Add support for Excito Bubba B3
|
2014-02-05 02:21:57 +00:00 |
kirkwood-cloudbox.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-db-88f6281.dts
|
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
|
2013-10-01 16:28:03 +00:00 |
kirkwood-db-88f6282.dts
|
ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding
|
2013-10-01 16:28:03 +00:00 |
kirkwood-db.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-dns320.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-dns325.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-dnskw.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-dockstar.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-dreamplug.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-ds109.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds110jv10.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds111.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds112.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds209.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds210.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds212.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds212j.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds409.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds409slim.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds411.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds411j.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-ds411slim.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-goflexnet.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-guruplug-server-plus.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-ib62x0.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-iconnect.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-iomega_ix2_200.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-is2.dts
|
ARM: SoC board updates for 3.12
|
2013-09-06 13:34:43 -07:00 |
kirkwood-km_kirkwood.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-laplug.dts
|
ARM: Kirkwood: DT board setup for LaPlug
|
2013-12-25 02:03:52 +00:00 |
kirkwood-lschlv2.dts
|
ARM: kirkwood: Use the preprocessor on device tree files
|
2013-08-06 14:11:37 +00:00 |
kirkwood-lsxhl.dts
|
ARM: kirkwood: Use the preprocessor on device tree files
|
2013-08-06 14:11:37 +00:00 |
kirkwood-lsxl.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-mplcec4.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-mv88f6281gtw-ge.dts
|
ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT
|
2014-02-22 20:39:06 +00:00 |
kirkwood-netgear_readynas_duo_v2.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-netgear_readynas_nv+_v2.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2-common.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-ns2.dts
|
ARM: SoC board updates for 3.12
|
2013-09-06 13:34:43 -07:00 |
kirkwood-ns2lite.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2max.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2mini.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-nsa310-common.dtsi
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-nsa310.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-nsa310a.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-openblocks_a6.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-openblocks_a7.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-rd88f6192.dts
|
ARM: Kirkwood: Add DT description of rd88f6192.
|
2014-02-17 03:01:24 +00:00 |
kirkwood-rd88f6281-a0.dts
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rd88f6281-a1.dts
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rd88f6281.dtsi
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rs212.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-rs409.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-rs411.dts
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-sheevaplug-common.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-sheevaplug-esata.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-sheevaplug.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-synology.dtsi
|
ARM: Kirkwood: Add support for many Synology NAS devices
|
2014-02-22 01:48:55 +00:00 |
kirkwood-t5325.dts
|
ARM: kirkwood: Add dts file describing HP T5325 thin client
|
2014-03-04 02:18:08 +00:00 |
kirkwood-topkick.dts
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
kirkwood-ts219-6281.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ts219-6282.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ts219.dtsi
|
dt/bindings: Remove all references to device_type "ethernet-phy"
|
2014-01-16 11:11:51 +00:00 |
kirkwood-ts419-6281.dts
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood-ts419-6282.dts
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood-ts419.dtsi
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood.dtsi
|
ARM: kirkwood: Add i2c alias so setting bus number
|
2014-03-04 02:17:58 +00:00 |
kizbox.dts
|
ARM: at91/dt: add watchdog properties to kizbox board
|
2014-01-28 21:33:38 +01:00 |
lpc32xx.dtsi
|
ARM: dts: lpc32xx: cpus/cpu nodes dts updates
|
2013-05-23 10:45:13 +01:00 |
Makefile
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
marco-evb.dts
|
|
|
marco.dtsi
|
ARM: prima2: move to generic reset controller driver framework
|
2014-03-05 10:33:47 +08:00 |
mmp2-brownstone.dts
|
|
|
mmp2.dtsi
|
|
|
moxart-uc7112lx.dts
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
moxart.dtsi
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
mpa1600.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
mxs-pinfunc.h
|
ARM: dts: mxs: add pinctrl header files
|
2013-09-26 13:01:36 +08:00 |
nspire-classic.dtsi
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
nspire-clp.dts
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
nspire-cx.dts
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
nspire-tp.dts
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
nspire.dtsi
|
arm: Add device trees for TI-Nspire hardware
|
2013-06-21 20:06:29 +02:00 |
omap2.dtsi
|
ARM: omap2.dtsi: add omapdss information
|
2014-03-19 09:31:48 +02:00 |
omap3-beagle-xm.dts
|
ARM: omap3-beagle-xm.dts: add display information
|
2014-03-19 11:11:38 +02:00 |
omap3-beagle.dts
|
ARM: omap3-beagle.dts: add display information
|
2014-03-19 11:11:27 +02:00 |
omap3-cm-t3x30.dtsi
|
ARM: dts: cm-t3x30: add USB OTG support
|
2014-02-28 14:09:12 -08:00 |
omap3-cm-t3x.dtsi
|
ARM: dts: cm-t3x30: add HS USB Host support
|
2014-02-28 14:09:11 -08:00 |
omap3-cm-t3517.dts
|
ARM: dts: sbc-t3517: add support for sbc-t3517
|
2014-02-28 14:09:14 -08:00 |
omap3-cm-t3530.dts
|
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
|
2014-03-12 10:40:37 -07:00 |
omap3-cm-t3730.dts
|
ARM: dts: sbc-t3x: refactor DT support
|
2014-02-28 14:09:08 -08:00 |
omap3-devkit8000.dts
|
ARM: dts: omap3: Set disabled status for McBSP instances as default state
|
2014-02-28 15:03:59 -08:00 |
omap3-evm-37xx.dts
|
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
|
2013-10-14 11:34:37 -07:00 |
omap3-evm-common.dtsi
|
ARM: SoC DT updates for 3.13
|
2013-11-11 17:34:56 +09:00 |
omap3-evm.dts
|
ARM: dts: Add common support for omap3-evm
|
2013-10-14 11:34:37 -07:00 |
omap3-gta04.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
omap3-igep0020.dts
|
fbdev changes for 3.15 (OMAP)
|
2014-04-07 10:47:51 -07:00 |
omap3-igep0030.dts
|
ARM: dts: omap3-igep: fix boot fail due wrong compatible match
|
2014-02-28 11:29:18 -08:00 |
omap3-igep.dtsi
|
ARM: dts: omap3: Set disabled status for McBSP instances as default state
|
2014-02-28 15:03:59 -08:00 |
omap3-ldp.dts
|
ARM: dts: omap3-ldp: fix mmc configuration
|
2014-03-04 11:44:35 -05:00 |
omap3-lilly-a83x.dtsi
|
ARM: dts: omap3: Add support for INCOstartec a83x module
|
2014-02-28 15:04:23 -08:00 |
omap3-lilly-dbb056.dts
|
ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
|
2014-02-28 15:04:28 -08:00 |
omap3-n9.dts
|
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
|
2014-02-13 15:21:36 -08:00 |
omap3-n900.dts
|
Merge branch '3.15/dss-dt-dts' into 3.15/fbdev
|
2014-03-20 08:18:27 +02:00 |
omap3-n950-n9.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap3-n950.dts
|
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
|
2014-02-13 15:21:36 -08:00 |
omap3-overo-alto35-common.dtsi
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-alto35.dts
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-base.dtsi
|
ARM: dts: overo: Push uart3 pinmux down to expansion board
|
2014-03-12 10:18:16 -07:00 |
omap3-overo-chestnut43-common.dtsi
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-chestnut43.dts
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-common-peripherals.dtsi
|
ARM: dts: overo: Add LIS33DE accelerometer
|
2014-03-12 10:21:12 -07:00 |
omap3-overo-gallop43-common.dtsi
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-gallop43.dts
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-palo43-common.dtsi
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-palo43.dts
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-storm-alto35.dts
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-storm-chestnut43.dts
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-storm-gallop43.dts
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-storm-palo43.dts
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-storm-summit.dts
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-storm-tobi.dts
|
ARM: dts: overo: reorganize include files
|
2014-03-12 10:17:25 -07:00 |
omap3-overo-storm.dtsi
|
ARM: dts: omap3-overo: Add HSUSB PHY
|
2014-03-12 10:17:27 -07:00 |
omap3-overo-summit-common.dtsi
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-summit.dts
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-tobi-common.dtsi
|
ARM: dts: overo: Add LIS33DE accelerometer
|
2014-03-12 10:21:12 -07:00 |
omap3-overo-tobi.dts
|
ARM: dts: overo: reorganize include files
|
2014-03-12 10:17:25 -07:00 |
omap3-overo.dtsi
|
Merge branch '3.15/dss-dt-dts' into 3.15/fbdev
|
2014-03-20 08:18:27 +02:00 |
omap3-sb-t35.dtsi
|
ARM: dts: sb-t35: fix Ethernet power supply
|
2014-02-28 14:09:09 -08:00 |
omap3-sbc-t3517.dts
|
ARM: dts: sbc-t3517: add support for sbc-t3517
|
2014-02-28 14:09:14 -08:00 |
omap3-sbc-t3530.dts
|
ARM: dts: sbc-t3530: add support for sbc-t3530
|
2014-02-28 14:09:13 -08:00 |
omap3-sbc-t3730.dts
|
ARM: dts: sbc-t3730: add pinmux for usb hub reset
|
2014-02-28 14:09:12 -08:00 |
omap3-zoom3.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
omap3.dtsi
|
MMC highlights for 3.15:
|
2014-04-09 08:39:39 -07:00 |
omap3xxx-clocks.dtsi
|
ARM: dts: set 'ti,set-rate-parent' for dpll4_m4 path
|
2014-03-19 09:31:48 +02:00 |
omap4-cpu-thermal.dtsi
|
arm: dts: add omap4 CPU thermal data
|
2013-12-04 09:34:25 -04:00 |
omap4-duovero-parlor.dts
|
ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor
|
2014-03-04 10:16:06 -08:00 |
omap4-duovero.dtsi
|
ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor
|
2014-03-04 10:16:06 -08:00 |
omap4-panda-a4.dts
|
ARM: dts: OMAP2+: Use pinctrl constants
|
2013-06-18 18:53:40 -05:00 |
omap4-panda-common.dtsi
|
ARM: omap4-panda.dts: add display information
|
2014-03-19 09:50:00 +02:00 |
omap4-panda-es.dts
|
ARM: dts: omap4-panda-es: Do not reset gpio1
|
2013-10-20 19:16:53 +02:00 |
omap4-panda.dts
|
ARM: dts: OMAP2+: Use #include for all device trees
|
2013-06-18 18:53:38 -05:00 |
omap4-sdp-es23plus.dts
|
ARM: dts: OMAP2+: Use pinctrl constants
|
2013-06-18 18:53:40 -05:00 |
omap4-sdp.dts
|
ARM: omap4-sdp.dts: add display information
|
2014-03-19 11:11:09 +02:00 |
omap4-var-som.dts
|
ARM: dts: OMAP4/5: Use existing constants for IRQs
|
2013-06-18 18:53:39 -05:00 |
omap4.dtsi
|
MMC highlights for 3.15:
|
2014-04-09 08:39:39 -07:00 |
omap5-core-thermal.dtsi
|
arm: dts: add omap5 CORE thermal data
|
2013-12-04 09:34:26 -04:00 |
omap5-gpu-thermal.dtsi
|
arm: dts: add omap5 GPU thermal data
|
2013-12-04 09:34:26 -04:00 |
omap5-uevm.dts
|
ARM: OMAP2+: Remove legacy_init_ehci_clk()
|
2014-03-04 10:20:22 -08:00 |
omap5.dtsi
|
MMC highlights for 3.15:
|
2014-04-09 08:39:39 -07:00 |
omap34xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap34xx-omap36xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
omap34xx.dtsi
|
The second half of the clock framework pull requeust for 3.14 is
|
2014-01-28 18:44:53 -08:00 |
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: fix omap3 dss clock handle names
|
2014-03-19 09:31:47 +02:00 |
omap36xx-clocks.dtsi
|
ARM: dts: use ti,fixed-factor-clock for dpll4_m4x2_mul_ck
|
2014-03-19 09:31:48 +02:00 |
omap36xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap36xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: omap3 clocks: simplify ssi aliases
|
2014-02-28 14:02:25 -08:00 |
omap36xx.dtsi
|
ARM: omap3.dtsi: add omapdss information
|
2014-03-19 09:31:49 +02:00 |
omap44xx-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap54xx-clocks.dtsi
|
ARM: dts: omap5 clock data
|
2014-01-17 12:36:01 -08:00 |
omap443x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap443x.dtsi
|
ARM: dts: OMAP4: Add device nodes for ABB
|
2014-03-05 11:53:36 -08:00 |
omap446x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap2420-h4.dts
|
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
|
2013-10-08 17:51:40 +02:00 |
omap2420-n8x0-common.dtsi
|
ARM: OMAP2+: dts: add n8x0 onenand
|
2013-11-25 15:38:09 -08:00 |
omap2420-n800.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
omap2420-n810-wimax.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
omap2420-n810.dts
|
ARM: dts: Add basic Nokia N8X0 support
|
2013-11-25 15:15:24 -08:00 |
omap2420.dtsi
|
ARM: dts: omap2: Set disabled status for McBSP instances as default state
|
2014-02-28 15:04:07 -08:00 |
omap2430-sdp.dts
|
ARM: dts: Add basic device tree support for omap2430 sdp
|
2013-11-25 15:15:23 -08:00 |
omap2430.dtsi
|
MMC highlights for 3.15:
|
2014-04-09 08:39:39 -07:00 |
omap3430-sdp.dts
|
Add craneboard devices
|
2014-03-02 14:22:03 -08:00 |
omap3430es1-clocks.dtsi
|
ARM: dts: fix omap3 dss clock handle names
|
2014-03-19 09:31:47 +02:00 |
omap4460.dtsi
|
ARM: dts: OMAP4: Add device nodes for ABB
|
2014-03-05 11:53:36 -08:00 |
omap-gpmc-smsc911x.dtsi
|
ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
|
2013-12-02 11:38:15 -08:00 |
omap-gpmc-smsc9221.dtsi
|
ARM: dts: omap: Add common file for SMSC9221
|
2014-03-12 10:18:16 -07:00 |
omap-zoom-common.dtsi
|
ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
|
2013-11-15 14:33:26 -08:00 |
orion5x-lacie-ethernet-disk-mini-v2.dts
|
dt/bindings: Remove all references to device_type "ethernet-phy"
|
2014-01-16 11:11:51 +00:00 |
orion5x.dtsi
|
DeviceTree updates for 3.14:
|
2014-01-24 17:27:34 -08:00 |
phy3250.dts
|
|
|
picoxcell-pc3x2.dtsi
|
ARM: dts: picoxcell: cpus/cpu nodes dts updates
|
2013-05-23 10:45:15 +01:00 |
picoxcell-pc3x3.dtsi
|
ARM: dts: picoxcell: cpus/cpu nodes dts updates
|
2013-05-23 10:45:15 +01:00 |
picoxcell-pc7302-pc3x2.dts
|
|
|
picoxcell-pc7302-pc3x3.dts
|
|
|
pm9g45.dts
|
ARM: at91: dt: switch to pinctrl to pre-processor
|
2013-05-17 12:11:39 +02:00 |
prima2-evb.dts
|
|
|
prima2.dtsi
|
Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
|
2014-04-10 08:55:08 -07:00 |
pxa2xx.dtsi
|
ARM: dts: pxa2xx: cpus/cpu nodes dts updates
|
2013-05-23 10:45:17 +01:00 |
pxa3xx.dtsi
|
ARM: pxa: DTS: override gpio node in pxa3xx.dtsi
|
2013-08-13 15:51:02 -07:00 |
pxa27x.dtsi
|
ARM: pxa: add PWM nodes to pxa27x.dtsi
|
2013-12-11 16:36:47 -08:00 |
pxa168-aspenite.dts
|
|
|
pxa168.dtsi
|
|
|
pxa910-dkb.dts
|
|
|
pxa910.dtsi
|
|
|
qcom-apq8074-dragonboard.dts
|
ARM: msm: Add support for APQ8074 Dragonboard
|
2014-01-02 11:24:44 -08:00 |
qcom-msm8660-surf.dts
|
ARM: dts: msm: split out msm8660 and msm8960 soc into dts include
|
2014-02-03 13:43:34 -06:00 |
qcom-msm8660.dtsi
|
ARM: dts: qcom: Add nodes necessary for SMP boot
|
2014-02-20 10:00:07 -06:00 |
qcom-msm8960-cdp.dts
|
ARM: dts: msm: split out msm8660 and msm8960 soc into dts include
|
2014-02-03 13:43:34 -06:00 |
qcom-msm8960.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
qcom-msm8974.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
r7s72100-genmai-reference.dts
|
ARM: shmobile: genmai: adapt dts to use native i2c driver
|
2014-02-18 11:35:30 +09:00 |
r7s72100-genmai.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r7s72100.dtsi
|
ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi
|
2014-02-18 11:35:02 +09:00 |
r8a73a4-ape6evm-reference.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
|
2013-12-10 17:27:17 +09:00 |
r8a73a4-ape6evm.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
|
2013-12-10 17:27:17 +09:00 |
r8a73a4.dtsi
|
ARM: shmobile: r8a73a4: Specify PFC interrupts in DT
|
2013-12-19 20:01:32 +09:00 |
r8a7740-armadillo800eva-reference.dts
|
ARM: shmobile: armadillo: dts: Add gpio-keys device
|
2013-12-19 20:01:33 +09:00 |
r8a7740-armadillo800eva.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7740.dtsi
|
ARM: shmobile: r8a7740: Specify PFC interrupts in DT
|
2013-12-19 20:01:32 +09:00 |
r8a7778-bockw-reference.dts
|
ARM: shmobile: bockw: use wp-gpios instead of WP pin
|
2014-02-06 15:58:49 +09:00 |
r8a7778-bockw.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7778.dtsi
|
ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes
|
2014-02-13 14:57:05 +09:00 |
r8a7779-marzen-reference.dts
|
ARM: shmobile: marzen: enable HSPI0 in DTS
|
2013-12-10 17:27:25 +09:00 |
r8a7779-marzen.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7779.dtsi
|
ARM: shmobile: r8a7779: add HSPI support to DTSI
|
2013-12-10 17:27:24 +09:00 |
r8a7790-lager.dts
|
ARM: shmobile: lager: add Ether DT support
|
2014-02-25 10:55:43 +09:00 |
r8a7790.dtsi
|
ARM: SoC: driver changes
|
2014-04-05 15:37:40 -07:00 |
r8a7791-koelsch.dts
|
ARM: shmobile: Add SDHI devices for Koelsch DTS
|
2014-02-26 15:11:41 +09:00 |
r8a7791.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
rk3xxx.dtsi
|
ARM: rockchip: add power-management-unit
|
2014-03-01 17:21:53 +01:00 |
rk3066a-bqcurie2.dts
|
ARM: rockchip: add dts for bqcurie2 tablet
|
2013-10-14 23:03:46 +02:00 |
rk3066a-clocks.dtsi
|
arm: Add basic clocks for Rockchip rk3066a SoCs
|
2013-06-21 09:20:56 +02:00 |
rk3066a.dtsi
|
ARM: rockchip: add sram dt nodes and documentation
|
2014-03-01 16:10:07 +01:00 |
rk3188-clocks.dtsi
|
ARM: rockchip: add support for rk3188 and Radxa Rock board
|
2013-10-14 23:04:09 +02:00 |
rk3188-radxarock.dts
|
ARM: rockchip: add support for rk3188 and Radxa Rock board
|
2013-10-14 23:04:09 +02:00 |
rk3188.dtsi
|
ARM: rockchip: add sram dt nodes and documentation
|
2014-03-01 16:10:07 +01:00 |
s3c24xx.dtsi
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
s3c64xx-pinctrl.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
s3c64xx.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
s3c2416-pinctrl.dtsi
|
ARM: dts: add devicetree support for s3c2416-smdk2416
|
2013-05-21 01:06:12 +09:00 |
s3c2416-smdk2416.dts
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
s3c2416.dtsi
|
ARM: dts: use #include for all device trees for Samsung
|
2013-06-19 03:28:40 +09:00 |
s3c6400.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
s3c6410-mini6410.dts
|
ARM: dts: Add dts file for S3C6410-based Mini6410 board
|
2013-09-17 06:48:29 +09:00 |
s3c6410-smdk6410.dts
|
ARM: dts: Add dts file for S3C6410-based SMDK6410 board
|
2013-09-17 06:48:29 +09:00 |
s3c6410.dtsi
|
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
|
2013-09-17 06:48:28 +09:00 |
sama5d3_can.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_emac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_gmac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_lcd.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_mci2.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_tcb1.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_uart.dtsi
|
ARM: at91: add uart aliases to sama5d3 dtsi
|
2013-12-09 11:10:14 +01:00 |
sama5d3.dtsi
|
ARM: at91/dt: sama5d3: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
sama5d3xcm.dtsi
|
ARM: at91/dt: remove old clk material
|
2013-12-02 15:31:29 +01:00 |
sama5d3xdm.dtsi
|
ARM: at91/dt: sama5d3: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
sama5d3xmb.dtsi
|
ARM: at91/dt: fix phy address in sama5xmb to match the reg property
|
2013-08-29 15:21:45 -04:00 |
sama5d31.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d31ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d33.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d33ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d34.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d34ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d35.dtsi
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d35ek.dts
|
ARM: at91/dt: split sama5d3 peripheral definitions
|
2013-10-16 15:47:08 +02:00 |
sama5d36.dtsi
|
ARM: at91: fix network interface ordering for sama5d36
|
2014-03-11 12:49:10 -07:00 |
sama5d36ek.dts
|
ARM: at91: sama5d3/dt: add sama5d36ek dts files
|
2013-12-10 09:59:57 -08:00 |
samsung_k3pe0e000b.dtsi
|
|
|
sh73a0-kzm9g-reference.dts
|
ARM: shmobile: kzm9g: add FSI support for DTS
|
2013-12-12 21:07:37 +09:00 |
sh73a0-kzm9g.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
sh73a0.dtsi
|
ARM: shmobile: sh73a0: Specify PFC interrupts in DT
|
2013-12-19 20:01:32 +09:00 |
sh7372-mackerel.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
sh7372.dtsi
|
ARM: shmobile: sh7372: Add pin control device to device tree
|
2013-07-22 10:12:36 +09:00 |
skeleton64.dtsi
|
ARM: dts: Fix memory node in skeleton64.dtsi
|
2013-08-07 16:33:50 +00:00 |
skeleton.dtsi
|
|
|
socfpga_arria5_socdk.dts
|
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
|
2014-03-29 01:11:46 +01:00 |
socfpga_arria5.dtsi
|
Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
|
2014-03-17 09:04:57 -04:00 |
socfpga_cyclone5_socdk.dts
|
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
|
2014-03-29 01:11:46 +01:00 |
socfpga_cyclone5_sockit.dts
|
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
|
2014-03-29 01:11:46 +01:00 |
socfpga_cyclone5.dtsi
|
Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
|
2014-03-17 09:04:57 -04:00 |
socfpga_vt.dts
|
ARM: SoC: driver changes
|
2014-04-05 15:37:40 -07:00 |
socfpga.dtsi
|
The clock framework changes for 3.15 look similar to past pull requests.
|
2014-04-05 18:39:18 -07:00 |
spear3xx.dtsi
|
ARM: dts: spear: cpus/cpu nodes dts updates
|
2013-05-23 10:45:21 +01:00 |
spear13xx.dtsi
|
ARM: dts: spear: cpus/cpu nodes dts updates
|
2013-05-23 10:45:21 +01:00 |
spear300-evb.dts
|
|
|
spear300.dtsi
|
|
|
spear310-evb.dts
|
|
|
spear310.dtsi
|
|
|
spear320-evb.dts
|
|
|
spear320-hmi.dts
|
|
|
spear320.dtsi
|
|
|
spear600-evb.dts
|
|
|
spear600.dtsi
|
ARM: dts: spear: cpus/cpu nodes dts updates
|
2013-05-23 10:45:21 +01:00 |
spear1310-evb.dts
|
|
|
spear1310.dtsi
|
|
|
spear1340-evb.dts
|
|
|
spear1340.dtsi
|
ARM: arm-soc: late cleanups
|
2013-05-07 11:22:14 -07:00 |
st-pincfg.h
|
ARM: STi: OF: Fix a typo in pincfg header
|
2013-12-04 08:58:39 +00:00 |
ste-ccu8540-pinctrl.dtsi
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
ste-ccu8540.dts
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
ste-ccu9540.dts
|
ARM: ux500: fix devicetree builds
|
2013-08-14 22:32:07 +02:00 |
ste-dbx5x0.dtsi
|
ARM: ux500: switch SSP/SPI clock name to "SSPCLK"
|
2014-02-26 13:35:49 +01:00 |
ste-href-ab8500.dtsi
|
ARM: ux500: move AB8500 clock out pins to DT
|
2014-02-04 20:50:50 +01:00 |
ste-href-ab8505.dtsi
|
ARM: ux500: move last AB8505 set-up to DT
|
2014-02-04 20:50:55 +01:00 |
ste-href-family-pinctrl.dtsi
|
ARM: ux500: move the WLAN GPIO pin setup to the device tree
|
2013-11-26 21:01:56 +01:00 |
ste-href-stuib.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
ste-href-tvk1281618.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
ste-href.dtsi
|
ARM: ux500: disable msp2 device tree node
|
2014-02-11 09:21:45 -08:00 |
ste-hrefprev60-stuib.dts
|
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
|
2013-10-03 10:29:24 +02:00 |
ste-hrefprev60-tvk.dts
|
ARM: ux500: split the HREF DTS files from two to four
|
2013-10-02 16:17:04 +02:00 |
ste-hrefprev60.dtsi
|
ARM: ux500: move AB8500 GPIOs to device tree
|
2014-02-04 20:46:50 +01:00 |
ste-hrefv60plus-stuib.dts
|
ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS
|
2013-10-03 10:29:24 +02:00 |
ste-hrefv60plus-tvk.dts
|
ARM: ux500: split the HREF DTS files from two to four
|
2013-10-02 16:17:04 +02:00 |
ste-hrefv60plus.dtsi
|
ARM: ux500: move AB8500 GPIOs to device tree
|
2014-02-04 20:46:50 +01:00 |
ste-nomadik-pinctrl.dtsi
|
ARM: ux500: move GPIO key configuration to device tree
|
2013-11-26 21:01:56 +01:00 |
ste-nomadik-s8815.dts
|
ARM: nomadik: get rid of explicit ethernet GPIO management
|
2013-11-28 21:08:42 +01:00 |
ste-nomadik-stn8815.dtsi
|
ARM: nomadik: Remove '0x's from nomadik stn8815 DTS file
|
2013-11-28 21:08:42 +01:00 |
ste-snowball.dts
|
ARM: ux500: move AB8500 GPIOs to device tree
|
2014-02-04 20:46:50 +01:00 |
ste-u300.dts
|
ARM: u300: switch SSP/SPI clock name to "SSPCLK"
|
2014-02-26 13:36:01 +01:00 |
stih41x-b2000.dtsi
|
ARM: STi: STiH415: Add ethernet support.
|
2014-03-11 10:04:00 +00:00 |
stih41x-b2020.dtsi
|
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
|
2014-03-27 02:01:25 +01:00 |
stih41x-b2020x.dtsi
|
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
|
2014-03-27 02:01:25 +01:00 |
stih41x.dtsi
|
ARM: STi: Fix cpu nodes with correct device_type.
|
2013-08-04 13:40:48 -07:00 |
stih415-b2000.dts
|
ARM: stih41x: Add B2000 board support
|
2013-06-25 13:42:50 -07:00 |
stih415-b2020.dts
|
ARM: stih41x: Add B2020 board support
|
2013-06-25 13:42:51 -07:00 |
stih415-clock.dtsi
|
ARM: STi: STiH415: Add ethernet support.
|
2014-03-11 10:04:00 +00:00 |
stih415-pinctrl.dtsi
|
ARM: STi: STIH415: Add IR support.
|
2014-03-11 10:04:27 +00:00 |
stih415.dtsi
|
ARM: STi: STIH415: Add IR support.
|
2014-03-11 10:04:27 +00:00 |
stih416-b2000.dts
|
ARM: stih41x: Add B2000 board support
|
2013-06-25 13:42:50 -07:00 |
stih416-b2020.dts
|
ARM: stih41x: Add B2020 board support
|
2013-06-25 13:42:51 -07:00 |
stih416-clock.dtsi
|
ARM: STi: STiH416: Add ethernet support.
|
2014-03-11 10:04:13 +00:00 |
stih416-pinctrl.dtsi
|
ARM: STi: stih416: Add support for the FSM Serial Flash Controller
|
2014-03-27 02:01:05 +01:00 |
stih416.dtsi
|
ARM: STi: stih416: Add support for the FSM Serial Flash Controller
|
2014-03-27 02:01:05 +01:00 |
sun4i-a10-a1000.dts
|
ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts
|
2014-03-04 17:44:43 +01:00 |
sun4i-a10-cubieboard.dts
|
ARM: sun4i: dt: Add USB host nodes to cubieboard dts
|
2014-03-04 17:44:49 +01:00 |
sun4i-a10-hackberry.dts
|
ARM: sun4i: dt: Add USB host nodes to hackberry dts
|
2014-03-04 17:45:07 +01:00 |
sun4i-a10-inet97fv2.dts
|
ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board
|
2014-03-04 17:47:03 +01:00 |
sun4i-a10-mini-xplus.dts
|
ARM: sun4i: dt: Add USB host nodes to mini-xplus dts
|
2014-03-04 17:45:14 +01:00 |
sun4i-a10-olinuxino-lime.dts
|
ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
|
2014-03-04 17:46:35 +01:00 |
sun4i-a10-pcduino.dts
|
ARM: sun4i: dt: Add USB host nodes to pcduino.dts
|
2014-03-04 17:45:23 +01:00 |
sun4i-a10.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
sun5i-a10s-olinuxino-micro.dts
|
ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro
|
2014-03-04 17:45:38 +01:00 |
sun5i-a10s.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
sun5i-a13-olinuxino-micro.dts
|
ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro
|
2014-03-04 17:45:47 +01:00 |
sun5i-a13-olinuxino.dts
|
ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino
|
2014-03-04 17:45:32 +01:00 |
sun5i-a13.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
sun6i-a31-colombus.dts
|
ARM: sun6i: colombus: Enable the I2C controllers
|
2014-03-07 15:28:09 +01:00 |
sun6i-a31.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
sun7i-a20-cubieboard2.dts
|
ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts
|
2014-03-04 17:45:58 +01:00 |
sun7i-a20-cubietruck.dts
|
ARM: sun7i: dt: Add USB host nodes to cubietruck dts
|
2014-03-04 17:45:54 +01:00 |
sun7i-a20-olinuxino-micro.dts
|
ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts
|
2014-03-04 17:46:05 +01:00 |
sun7i-a20.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
sunxi-common-regulators.dtsi
|
ARM: sunxi: dt: Add sunxi-common-regulators include file
|
2014-03-04 17:41:33 +01:00 |
tegra20-colibri-512.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
tegra20-harmony.dts
|
ARM: tegra: Enable LVDS on Harmony
|
2013-12-19 13:07:37 -07:00 |
tegra20-iris-512.dts
|
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
|
2013-12-16 14:09:20 -07:00 |
tegra20-medcom-wide.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
tegra20-paz00.dts
|
ARM: tegra: paz00: Add LVDS support to device tree
|
2014-02-05 09:47:22 -07:00 |
tegra20-plutux.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
tegra20-seaboard.dts
|
ARM: tegra: enable LCD panel on Seaboard
|
2014-02-19 10:15:37 -07:00 |
tegra20-tamonten.dtsi
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20-tec.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
tegra20-trimslice.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20-ventana.dts
|
ARM: tegra: enable LCD panel on Ventana
|
2014-02-19 10:15:45 -07:00 |
tegra20-whistler.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra30-beaver.dts
|
ARM: tegra: enable USB2 on Tegra30 Beaver
|
2013-12-20 09:48:57 -07:00 |
tegra30-cardhu-a02.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
tegra30-cardhu-a04.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
tegra30-cardhu.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra30.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra114-dalmore.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
tegra114.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra124-venice2.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
tegra124.dtsi
|
ARM: tegra: use 2 address cells for Tegra124 DT
|
2014-03-05 13:29:13 -07:00 |
tny_a9g20.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
tny_a9260_common.dtsi
|
|
|
tny_a9260.dts
|
ARM: at91: dt: use #include for all device trees
|
2013-05-17 11:27:49 +02:00 |
tny_a9263.dts
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
tps6507x.dtsi
|
|
|
tps65217.dtsi
|
|
|
tps65910.dtsi
|
ARM: dts: tps65910 backup battery regulator
|
2014-02-28 13:52:25 -08:00 |
twl4030_omap3.dtsi
|
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line
|
2013-06-18 18:53:45 -05:00 |
twl4030.dtsi
|
ARM: dts: TWL4030: Add keypad node
|
2014-03-02 18:34:39 +01:00 |
twl6030_omap4.dtsi
|
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
|
2013-10-08 17:51:41 +02:00 |
twl6030.dtsi
|
|
|
usb_a9g20_common.dtsi
|
ARM: at91: dt: add Calao USB-A9G20 low power version
|
2013-05-31 16:52:37 +02:00 |
usb_a9g20_lpw.dts
|
ARM: at91: dt: add Calao USB-A9G20 low power version
|
2013-05-31 16:52:37 +02:00 |
usb_a9g20-dab-mmx.dtsi
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
usb_a9g20.dts
|
ARM: at91: dt: add Calao USB-A9G20 low power version
|
2013-05-31 16:52:37 +02:00 |
usb_a9260_common.dtsi
|
ARM: at91: dt: switch to standard GPIO flag defines.
|
2013-05-17 11:27:49 +02:00 |
usb_a9260.dts
|
ARM: at91: dt: usb-a9260: update shutdown controller
|
2013-05-31 16:52:35 +02:00 |
usb_a9263.dts
|
ARM: at91: dt: usb-a9263: add dataflash support
|
2013-05-31 16:52:36 +02:00 |
versatile-ab.dts
|
arm/versatile: Fix versatile irq specifications.
|
2013-10-28 16:50:11 -07:00 |
versatile-pb.dts
|
of: Move testcase FDT data into drivers/of
|
2014-02-20 11:52:08 +00:00 |
vexpress-v2m-rs1.dtsi
|
|
|
vexpress-v2m.dtsi
|
|
|
vexpress-v2p-ca5s.dts
|
|
|
vexpress-v2p-ca9.dts
|
|
|
vexpress-v2p-ca15_a7.dts
|
ARM: SoC late changes for v3.12
|
2013-09-09 16:35:29 -07:00 |
vexpress-v2p-ca15-tc1.dts
|
|
|
vf610-cosmic.dts
|
ARM: dts: vf610: make pinctrl nodes board specific
|
2014-02-09 21:32:28 +08:00 |
vf610-pinfunc.h
|
ARM: dts: add SoC level device tree source for VF610
|
2013-06-17 16:04:23 +08:00 |
vf610-twr.dts
|
ARM: dts: vf610-twr: Add ADC support
|
2014-02-24 10:09:30 +08:00 |
vf610.dtsi
|
ARM: dts: vf610: i2c: Add eDMA support
|
2014-02-27 20:33:33 +08:00 |
vt8500-bv07.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
vt8500.dtsi
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
wm8505-ref.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
wm8505.dtsi
|
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
|
2013-05-12 20:31:15 +12:00 |
wm8650-mid.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
wm8650.dtsi
|
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
|
2013-05-12 20:31:15 +12:00 |
wm8750-apc8750.dts
|
dts: vt8500: Update serial nodes and disable by default in SoC files
|
2013-05-12 20:31:13 +12:00 |
wm8750.dtsi
|
dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files
|
2013-05-12 20:31:15 +12:00 |
wm8850-w70v2.dts
|
ARM: dts: Use the PWM polarity flags
|
2013-09-03 13:08:11 +02:00 |
wm8850.dtsi
|
dts: vt8500: Correct reference clock on WM8850 SoCs
|
2013-06-04 07:31:22 +12:00 |
xenvm-4.2.dts
|
|
|
zynq-7000.dtsi
|
ARM: SoC: late cleanups
|
2014-04-05 15:46:37 -07:00 |
zynq-zc702.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |
zynq-zc706.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |
zynq-zed.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |