forked from Minki/linux
789b23bc40
Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
361 lines
8.5 KiB
C
361 lines
8.5 KiB
C
/*
|
|
* Chip-specific setup code for the AT91SAM9G45 family
|
|
*
|
|
* Copyright (C) 2009 Atmel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <mach/at91sam9g45.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91_rstc.h>
|
|
#include <mach/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
|
|
static struct map_desc at91sam9g45_io_desc[] __initdata = {
|
|
{
|
|
.virtual = AT91_VA_BASE_SYS,
|
|
.pfn = __phys_to_pfn(AT91_BASE_SYS),
|
|
.length = SZ_16K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
|
|
.pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
|
|
.length = AT91SAM9G45_SRAM_SIZE,
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Clocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The peripheral clocks.
|
|
*/
|
|
static struct clk pioA_clk = {
|
|
.name = "pioA_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioB_clk = {
|
|
.name = "pioB_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioC_clk = {
|
|
.name = "pioC_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pioDE_clk = {
|
|
.name = "pioDE_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart0_clk = {
|
|
.name = "usart0_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_US0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart1_clk = {
|
|
.name = "usart1_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_US1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart2_clk = {
|
|
.name = "usart2_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_US2,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk usart3_clk = {
|
|
.name = "usart3_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_US3,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc0_clk = {
|
|
.name = "mci0_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi0_clk = {
|
|
.name = "twi0_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk twi1_clk = {
|
|
.name = "twi1_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi0_clk = {
|
|
.name = "spi0_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk spi1_clk = {
|
|
.name = "spi1_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc0_clk = {
|
|
.name = "ssc0_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ssc1_clk = {
|
|
.name = "ssc1_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tcb_clk = {
|
|
.name = "tcb_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_TCB,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk pwm_clk = {
|
|
.name = "pwm_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk tsc_clk = {
|
|
.name = "tsc_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_TSC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk dma_clk = {
|
|
.name = "dma_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_DMA,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk uhphs_clk = {
|
|
.name = "uhphs_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk lcdc_clk = {
|
|
.name = "lcdc_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk ac97_clk = {
|
|
.name = "ac97_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk macb_clk = {
|
|
.name = "macb_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk isi_clk = {
|
|
.name = "isi_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_ISI,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk udphs_clk = {
|
|
.name = "udphs_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
static struct clk mmc1_clk = {
|
|
.name = "mci1_clk",
|
|
.pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
};
|
|
|
|
/* One additional fake clock for ohci */
|
|
static struct clk ohci_clk = {
|
|
.name = "ohci_clk",
|
|
.pmc_mask = 0,
|
|
.type = CLK_TYPE_PERIPHERAL,
|
|
.parent = &uhphs_clk,
|
|
};
|
|
|
|
static struct clk *periph_clocks[] __initdata = {
|
|
&pioA_clk,
|
|
&pioB_clk,
|
|
&pioC_clk,
|
|
&pioDE_clk,
|
|
&usart0_clk,
|
|
&usart1_clk,
|
|
&usart2_clk,
|
|
&usart3_clk,
|
|
&mmc0_clk,
|
|
&twi0_clk,
|
|
&twi1_clk,
|
|
&spi0_clk,
|
|
&spi1_clk,
|
|
&ssc0_clk,
|
|
&ssc1_clk,
|
|
&tcb_clk,
|
|
&pwm_clk,
|
|
&tsc_clk,
|
|
&dma_clk,
|
|
&uhphs_clk,
|
|
&lcdc_clk,
|
|
&ac97_clk,
|
|
&macb_clk,
|
|
&isi_clk,
|
|
&udphs_clk,
|
|
&mmc1_clk,
|
|
// irq0
|
|
&ohci_clk,
|
|
};
|
|
|
|
/*
|
|
* The two programmable clocks.
|
|
* You must configure pin multiplexing to bring these signals out.
|
|
*/
|
|
static struct clk pck0 = {
|
|
.name = "pck0",
|
|
.pmc_mask = AT91_PMC_PCK0,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 0,
|
|
};
|
|
static struct clk pck1 = {
|
|
.name = "pck1",
|
|
.pmc_mask = AT91_PMC_PCK1,
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.id = 1,
|
|
};
|
|
|
|
static void __init at91sam9g45_register_clocks(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
|
clk_register(periph_clocks[i]);
|
|
|
|
clk_register(&pck0);
|
|
clk_register(&pck1);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* GPIO
|
|
* -------------------------------------------------------------------- */
|
|
|
|
static struct at91_gpio_bank at91sam9g45_gpio[] = {
|
|
{
|
|
.id = AT91SAM9G45_ID_PIOA,
|
|
.offset = AT91_PIOA,
|
|
.clock = &pioA_clk,
|
|
}, {
|
|
.id = AT91SAM9G45_ID_PIOB,
|
|
.offset = AT91_PIOB,
|
|
.clock = &pioB_clk,
|
|
}, {
|
|
.id = AT91SAM9G45_ID_PIOC,
|
|
.offset = AT91_PIOC,
|
|
.clock = &pioC_clk,
|
|
}, {
|
|
.id = AT91SAM9G45_ID_PIODE,
|
|
.offset = AT91_PIOD,
|
|
.clock = &pioDE_clk,
|
|
}, {
|
|
.id = AT91SAM9G45_ID_PIODE,
|
|
.offset = AT91_PIOE,
|
|
.clock = &pioDE_clk,
|
|
}
|
|
};
|
|
|
|
static void at91sam9g45_reset(void)
|
|
{
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
|
|
}
|
|
|
|
static void at91sam9g45_poweroff(void)
|
|
{
|
|
at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
}
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9G45 processor initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
void __init at91sam9g45_initialize(unsigned long main_clock)
|
|
{
|
|
/* Map peripherals */
|
|
iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
|
|
|
|
at91_arch_reset = at91sam9g45_reset;
|
|
pm_power_off = at91sam9g45_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
|
|
|
|
/* Init clock subsystem */
|
|
at91_clock_init(main_clock);
|
|
|
|
/* Register the processor-specific clocks */
|
|
at91sam9g45_register_clocks();
|
|
|
|
/* Register GPIO subsystem */
|
|
at91_gpio_init(at91sam9g45_gpio, 5);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------
|
|
* Interrupt initialization
|
|
* -------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
|
*/
|
|
static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller (FIQ) */
|
|
7, /* System Peripherals */
|
|
1, /* Parallel IO Controller A */
|
|
1, /* Parallel IO Controller B */
|
|
1, /* Parallel IO Controller C */
|
|
1, /* Parallel IO Controller D and E */
|
|
0,
|
|
5, /* USART 0 */
|
|
5, /* USART 1 */
|
|
5, /* USART 2 */
|
|
5, /* USART 3 */
|
|
0, /* Multimedia Card Interface 0 */
|
|
6, /* Two-Wire Interface 0 */
|
|
6, /* Two-Wire Interface 1 */
|
|
5, /* Serial Peripheral Interface 0 */
|
|
5, /* Serial Peripheral Interface 1 */
|
|
4, /* Serial Synchronous Controller 0 */
|
|
4, /* Serial Synchronous Controller 1 */
|
|
0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
|
|
0, /* Pulse Width Modulation Controller */
|
|
0, /* Touch Screen Controller */
|
|
0, /* DMA Controller */
|
|
2, /* USB Host High Speed port */
|
|
3, /* LDC Controller */
|
|
5, /* AC97 Controller */
|
|
3, /* Ethernet */
|
|
0, /* Image Sensor Interface */
|
|
2, /* USB Device High speed port */
|
|
0,
|
|
0, /* Multimedia Card Interface 1 */
|
|
0,
|
|
0, /* Advanced Interrupt Controller (IRQ0) */
|
|
};
|
|
|
|
void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
|
|
{
|
|
if (!priority)
|
|
priority = at91sam9g45_default_irq_priority;
|
|
|
|
/* Initialize the AIC interrupt controller */
|
|
at91_aic_init(priority);
|
|
|
|
/* Enable GPIO interrupts */
|
|
at91_gpio_irq_setup();
|
|
}
|