forked from Minki/linux
51c62982a3
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:
<mach/pxa25x.h> - for pxa25x based platforms
<mach/pxa27x.h> - for pxa27x based platforms
<mach/pxa300.h> - for pxa300 based platforms
<mach/pxa320.h> - for pxa320 based platforms
<mach/pxa930.h> - for pxa930 based platforms
NOTE:
1. one header one board file, they are not compatible (i.e. they have
conflicting definitions which won't compile if included together).
2. Unless strictly necessary, the following header files are considered
to be SoC files use _only_, and is not recommended to be included in
board code:
<mach/hardware.h>
<mach/pxa-regs.h>
<mach/pxa2xx-regs.h>
<mach/pxa3xx-regs.h>
<mach/mfp.h>
<mach/mfp-pxa2xx.h>
<mach/mfp-pxa25x.h>
<mach/mfp-pxa27x.h>
<mach/mfp-pxa3xx.h>
<mach/mfp-pxa300.h>
<mach/mfp-pxa320.h>
<mach/mfp-pxa930.h>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
216 lines
4.5 KiB
C
216 lines
4.5 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/idp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
|
|
*
|
|
* 2001-09-13: Cliff Brake <cbrake@accelent.com>
|
|
* Initial code
|
|
*
|
|
* 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
|
|
* <http://www.vibren.com> <http://bec-systems.com>
|
|
* Updated for 2.6 kernel
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fb.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/pxa25x.h>
|
|
#include <mach/idp.h>
|
|
#include <mach/pxafb.h>
|
|
#include <mach/bitfield.h>
|
|
#include <mach/mmc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/* TODO:
|
|
* - add pxa2xx_audio_ops_t device structure
|
|
* - Ethernet interrupt
|
|
*/
|
|
|
|
static unsigned long idp_pin_config[] __initdata = {
|
|
/* LCD */
|
|
GPIO58_LCD_LDD_0,
|
|
GPIO59_LCD_LDD_1,
|
|
GPIO60_LCD_LDD_2,
|
|
GPIO61_LCD_LDD_3,
|
|
GPIO62_LCD_LDD_4,
|
|
GPIO63_LCD_LDD_5,
|
|
GPIO64_LCD_LDD_6,
|
|
GPIO65_LCD_LDD_7,
|
|
GPIO66_LCD_LDD_8,
|
|
GPIO67_LCD_LDD_9,
|
|
GPIO68_LCD_LDD_10,
|
|
GPIO69_LCD_LDD_11,
|
|
GPIO70_LCD_LDD_12,
|
|
GPIO71_LCD_LDD_13,
|
|
GPIO72_LCD_LDD_14,
|
|
GPIO73_LCD_LDD_15,
|
|
GPIO74_LCD_FCLK,
|
|
GPIO75_LCD_LCLK,
|
|
GPIO76_LCD_PCLK,
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* STUART */
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* MMC */
|
|
GPIO6_MMC_CLK,
|
|
GPIO8_MMC_CS0,
|
|
|
|
/* Ethernet */
|
|
GPIO33_nCS_5, /* Ethernet CS */
|
|
GPIO4_GPIO, /* Ethernet IRQ */
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = (IDP_ETH_PHYS + 0x300),
|
|
.end = (IDP_ETH_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_GPIO(4),
|
|
.end = IRQ_GPIO(4),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static void idp_backlight_power(int on)
|
|
{
|
|
if (on) {
|
|
IDP_CPLD_LCD |= (1<<1);
|
|
} else {
|
|
IDP_CPLD_LCD &= ~(1<<1);
|
|
}
|
|
}
|
|
|
|
static void idp_vlcd(int on)
|
|
{
|
|
if (on) {
|
|
IDP_CPLD_LCD |= (1<<2);
|
|
} else {
|
|
IDP_CPLD_LCD &= ~(1<<2);
|
|
}
|
|
}
|
|
|
|
static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
|
|
{
|
|
if (on) {
|
|
IDP_CPLD_LCD |= (1<<0);
|
|
} else {
|
|
IDP_CPLD_LCD &= ~(1<<0);
|
|
}
|
|
|
|
/* call idp_vlcd for now as core driver does not support
|
|
* both power and vlcd hooks. Note, this is not technically
|
|
* the correct sequence, but seems to work. Disclaimer:
|
|
* this may eventually damage the display.
|
|
*/
|
|
|
|
idp_vlcd(on);
|
|
}
|
|
|
|
static struct pxafb_mode_info sharp_lm8v31_mode = {
|
|
.pixclock = 270000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 1,
|
|
.left_margin = 3,
|
|
.right_margin = 3,
|
|
.vsync_len = 1,
|
|
.upper_margin = 0,
|
|
.lower_margin = 0,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lm8v31 = {
|
|
.modes = &sharp_lm8v31_mode,
|
|
.num_modes = 1,
|
|
.cmap_inverse = 0,
|
|
.cmap_static = 0,
|
|
.lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_AC_BIAS_FREQ(255),
|
|
.pxafb_backlight_power = &idp_backlight_power,
|
|
.pxafb_lcd_power = &idp_lcd_power
|
|
};
|
|
|
|
static struct pxamci_platform_data idp_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
};
|
|
|
|
static void __init idp_init(void)
|
|
{
|
|
printk("idp_init()\n");
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
|
|
|
|
platform_device_register(&smc91x_device);
|
|
//platform_device_register(&mst_audio_device);
|
|
set_pxa_fb_info(&sharp_lm8v31);
|
|
pxa_set_mci_info(&idp_mci_platform_data);
|
|
}
|
|
|
|
static struct map_desc idp_io_desc[] __initdata = {
|
|
{
|
|
.virtual = IDP_COREVOLT_VIRT,
|
|
.pfn = __phys_to_pfn(IDP_COREVOLT_PHYS),
|
|
.length = IDP_COREVOLT_SIZE,
|
|
.type = MT_DEVICE
|
|
}, {
|
|
.virtual = IDP_CPLD_VIRT,
|
|
.pfn = __phys_to_pfn(IDP_CPLD_PHYS),
|
|
.length = IDP_CPLD_SIZE,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static void __init idp_map_io(void)
|
|
{
|
|
pxa_map_io();
|
|
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
|
|
}
|
|
|
|
|
|
MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
|
|
/* Maintainer: Vibren Technologies */
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = idp_map_io,
|
|
.init_irq = pxa25x_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = idp_init,
|
|
MACHINE_END
|