linux/drivers/net/wireless/ath/ath9k
Pawel Kulakowski 50e81e2f0b ath9k: Enable support for cloned SKBS
Ath9k driver does not modify tx skbs, so SUPPORTS_CLONED_SKBS
flag can be set. Enabling this flag significant reduce number
of copy operation during TCP Tx. This is especially noticeable
on platforms with slower CPU (lower CPU usage brings
profits in better TCP Tx troughput results).

Tested on MIPS with 560 MHz clock
Without CLONED_SKBS flag:
TCP Tx 145 Mb/s (iperf result)
__copy_user_common consumes 12.9% of CPU (result from perf tool)
0% CPU Idle

With CLONED_SKBS flag:
TCP Tx 170 Mb/s (iperf result)
__copy_user_common consumes 1.8% of CPU (result from perf tool)
12% CPU Idle

Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07 15:02:15 +02:00
..
ahb.c ath9k: Add HW IDs for QCA956x 2015-01-15 14:24:57 +02:00
ani.c ath9k: use one shot read in ath9k_hw_update_mibstats 2015-03-30 11:31:31 +03:00
ani.h
antenna.c
ar953x_initvals.h ath9k: Update QCA953x initvals 2015-01-29 10:33:20 +02:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2015-01-29 10:33:21 +02:00
ar956x_initvals.h ath9k: Add initvals for QCA956x 2015-01-15 14:24:59 +02:00
ar5008_initvals.h
ar5008_phy.c ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate. 2015-05-26 14:02:45 +03:00
ar9001_initvals.h
ar9002_calib.c ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY 2015-03-30 11:31:30 +03:00
ar9002_hw.c
ar9002_initvals.h
ar9002_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9002_phy.c ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate. 2015-05-26 14:02:45 +03:00
ar9002_phy.h ath9k: Fix NF CCA limits for AR9287 and AR9227 2015-10-14 14:05:00 +03:00
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_aic.c ath9k: Handle MCI_STATE_AIC_CAL 2015-03-20 08:28:11 +02:00
ar9003_aic.h ath9k: Handle MCI_STATE_AIC_CAL 2015-03-20 08:28:11 +02:00
ar9003_buffalo_initvals.h
ar9003_calib.c ath9k: enable hw manual peak calibration for QCA9561 2015-09-29 10:34:09 +03:00
ar9003_eeprom.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
ar9003_eeprom.h
ar9003_hw.c ath9k: rename ini_modes_rxgain_5g_xlna to ini_modes_rxgain_xlna 2015-10-14 14:15:55 +03:00
ar9003_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9003_mac.h
ar9003_mci.c ath9k: Start AIC calibration during MCI reset 2015-03-20 08:28:14 +02:00
ar9003_mci.h ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
ar9003_paprd.c
ar9003_phy.c ath9k: fix QCA9561 XLNA rxgain initial 2015-10-14 14:15:57 +03:00
ar9003_phy.h ath9k: Fix register definitions for QCA956x 2015-07-21 18:03:02 +03:00
ar9003_rtt.c ath9k: Fix RTT chainmask usage 2015-03-13 15:19:36 +02:00
ar9003_rtt.h ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
ar9003_wow.c ath9k: Restart TSF2 timers on wakeup 2015-02-26 14:58:46 +02:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
ar9462_2p1_initvals.h
ar9485_initvals.h
ar9565_1p0_initvals.h
ar9565_1p1_initvals.h
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2014-10-27 14:16:17 -04:00
ath9k.h ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
beacon.c ath9k: MCC, add NOA also in case of an AP 2015-12-08 16:50:58 +02:00
btcoex.c ath9k: Fix wlan-active gpio for the AR9003 family 2015-03-03 15:46:56 +02:00
btcoex.h ath9k: Handle MCI_STATE_AIC_CAL_SINGLE 2015-03-20 08:27:20 +02:00
calib.c ath9k: ath9k_hw_loadnf: use REG_RMW 2015-03-30 11:31:32 +03:00
calib.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
channel.c ath9k: MCC, print time elapsed between events 2015-12-08 16:51:02 +02:00
common-beacon.c ath9k: remove ath9k_mod_tsf64_tu 2015-12-08 16:51:05 +02:00
common-beacon.h
common-debug.c ath9k: fix phyerror codes 2015-10-28 20:57:13 +02:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c
common-init.h
common-spectral.c ath9k: Mix the received FFT bins to the random pool 2015-05-09 16:46:18 +03:00
common-spectral.h ath9k: Move processing of FFT frames to different functions 2015-05-09 16:46:11 +03:00
common.c Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
common.h ath9k: fix tracking of enabled AP beacons 2015-03-16 08:34:36 +02:00
debug_sta.c ath9k: fix build with CONFIG_ATH9K_STATION_STATISTICS=y 2015-08-07 11:21:06 +03:00
debug.c ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
debug.h ath9k: make DMA stop related messages debug-only 2015-07-21 16:56:41 +03:00
dfs_debug.c
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.c ath9k: DFS - add pulse chirp detection for FCC 2015-07-11 19:51:53 +03:00
dfs.h
dynack.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
dynack.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
eeprom_4k.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom_9287.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom_def.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom.c ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
eeprom.h ath9k: Simplify and fix eeprom endianness swapping 2015-12-08 16:50:18 +02:00
gpio.c ath9k: add extra GPIO led support 2015-04-07 20:15:01 +03:00
hif_usb.c ath9k_htc: introduce support for different fw versions 2015-09-18 10:40:14 +03:00
hif_usb.h ath9k_htc: introduce support for different fw versions 2015-09-18 10:40:14 +03:00
htc_drv_beacon.c ath9k_htc: add support of channel switch 2015-06-15 12:44:34 +03:00
htc_drv_debug.c wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasks 2015-02-13 21:21:38 -08:00
htc_drv_gpio.c ath9k and ath9k_htc: rename variable "led_blink" 2015-01-27 20:06:27 +02:00
htc_drv_init.c ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
htc_drv_main.c ath9k_htc: fix handling return value of ath9k_hw_calibrate 2015-12-31 15:23:17 +02:00
htc_drv_txrx.c mac80211: remove support for IFF_PROMISC 2015-04-24 11:14:13 +02:00
htc_hst.c ath9k_htc: check for underflow in ath9k_htc_rx_msg() 2015-11-26 14:05:17 +02:00
htc_hst.h
htc.h ath9k_htc: add support of channel switch 2015-06-15 12:44:34 +03:00
hw-ops.h ath9k: Register private AIC ops 2015-03-20 08:27:17 +02:00
hw.c ath9k: fix AR_RX_FILTER for ar9462/ar9565 when rx stopped 2015-12-11 14:08:57 +02:00
hw.h driver core update for 4.4-rc1 2015-11-04 21:50:37 -08:00
init.c ath9k: Enable support for cloned SKBS 2016-01-07 15:02:15 +02:00
Kconfig ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
link.c ath9k: match wait_for_completion_timeout return type 2015-08-13 15:27:12 +03:00
mac.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
mac.h ath9k: fix phyerror codes 2015-10-28 20:57:13 +02:00
main.c ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
Makefile ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
mci.c ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
mci.h
pci.c ath9k: Check WOW triggers properly 2015-02-03 15:31:04 +02:00
phy.h
recv.c ath9k: fix AR_RX_FILTER for ar9462/ar9565 when rx stopped 2015-12-11 14:08:57 +02:00
reg_aic.h ath9k: Add register definitions for AIC 2015-03-20 08:27:19 +02:00
reg_mci.h ath9k: Mute BT properly 2015-03-03 14:55:27 +02:00
reg_wow.h ath9k: Clear additional WoW events 2015-02-26 14:58:43 +02:00
reg.h ath9k: add extra GPIO led support 2015-04-07 20:15:01 +03:00
rng.c ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
tx99.c ath9k: Unify reset API 2014-10-27 14:16:14 -04:00
wmi.c ath9k_htc: wmi: match wait_for_completion_timeout return type 2015-08-13 15:26:19 +03:00
wmi.h ath9k_htc: check seq number instead of cmd id for timeout 2015-04-07 20:07:44 +03:00
wow.c ath9k: Register correct WOW details with mac80211 2015-02-06 08:39:21 +02:00
xmit.c ath9k: fix inconsistent indenting on return statement 2015-12-11 14:09:00 +02:00