linux/drivers/iio
Eugen Hristev 500a2eefd6 iio: adc: at91-sama5d2_adc: add support for suspend/resume functionality
Added support for suspend/resume functionality for the ADC IP
in sama5d2 SoC.
In order to enter Suspend to ram mode (backup + self refresh mode for
memory), in which the ADC IP is no longer powered, we need to reset the
pins to default state, for the scenario when they are also used for I2C
bus to communicate with the PMIC.
On resume, we need to reconfigure the ADC IP registers and reconfigure the
trigger registers in the case when the suspend procedure is done while
sysfs has the buffer and trigger enabled.
In the case the suspend happens exactly during a software triggered
conversion, the request will time out, because we reset and power down
the ADC.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:58 +01:00
..
accel iio: accel: st_accel_spi: rename of_device_id table in st_accel_of_match 2017-07-01 10:16:58 +01:00
adc iio: adc: at91-sama5d2_adc: add support for suspend/resume functionality 2017-07-01 10:16:58 +01:00
amplifiers
buffer iio: buffer-dmaengine: Add missing header buffer_impl.h 2017-06-13 20:56:05 +01:00
chemical drivers: iio: chemical: replace comma with a semicolon 2017-03-30 19:13:23 +01:00
common iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code 2017-07-01 10:16:56 +01:00
counter iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option 2017-03-15 21:59:08 +00:00
dac First set of new device support, features and cleanups for IIO in the 4.13 cycle 2017-05-29 15:53:42 +02:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code 2017-07-01 10:16:56 +01:00
health First set of IIO new device support, features and cleanup for the 4.12 cycle. 2017-03-06 13:17:21 +01:00
humidity iio: humidity: hdc100x: add match table and device id's 2017-07-01 10:16:38 +01:00
imu Second set of IIO new device support, features and cleanups for the 4.13 cycle. 2017-06-26 07:09:23 +02:00
light iio: light: tcs3472: fix ATIME register write 2017-07-01 10:16:49 +01:00
magnetometer iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code 2017-07-01 10:16:56 +01:00
orientation iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support 2017-05-07 12:22:36 +01:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: lmp91000: Set parent device 2017-02-19 12:01:52 +00:00
pressure iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code 2017-07-01 10:16:56 +01:00
proximity Second set of IIO new device support, features and cleanups for the 4.13 cycle. 2017-06-26 07:09:23 +02:00
temperature iio: temperature: tsys01: Add OF match table 2017-07-01 10:16:42 +01:00
trigger iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode 2017-06-11 15:59:05 +01:00
iio_core_trigger.h
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-buffer.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c iio: add hardware triggered operating mode 2017-06-11 15:58:41 +01:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: fix NULL pointer dereference in iio_trigger_write_current() 2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c iio: inkern: fix a static checker error 2017-04-26 06:04:06 +01:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00