leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4f2aa89cd2
linux/drivers/net/benet/be_hw.h
Ajit Khaparde 84517482e1 be2net: Changes to support flashing of the be2 network adapter 
Changes to support flashing of the be2 network adapter using the
request_firmware() & ethtool infrastructure. The trigger to flash the device
will come from ethtool utility. The driver will invoke request_firmware()
to start the flash process. The file containing the flash image is expected
to be available in /lib/firmware/

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07 01:56:38 -07:00

302 lines
8.3 KiB
C
Raw Blame History

/*
* Copyright (C) 2005 - 2009 ServerEngines
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation. The full GNU General
* Public License is included in this distribution in the file called COPYING.
*
* Contact Information:
* linux-drivers@serverengines.com
*
* ServerEngines
* 209 N. Fair Oaks Ave
* Sunnyvale, CA 94085
*/
/********* Mailbox door bell *************/
/* Used for driver communication with the FW.
* The software must write this register twice to post any command. First,
* it writes the register with hi=1 and the upper bits of the physical address
* for the MAILBOX structure. Software must poll the ready bit until this
* is acknowledged. Then, sotware writes the register with hi=0 with the lower
* bits in the address. It must poll the ready bit until the command is
* complete. Upon completion, the MAILBOX will contain a valid completion
* queue entry.
*/
#define MPU_MAILBOX_DB_OFFSET 0x160
#define MPU_MAILBOX_DB_RDY_MASK 0x1 /* bit 0 */
#define MPU_MAILBOX_DB_HI_MASK 0x2 /* bit 1 */
#define MPU_EP_CONTROL 0
/********** MPU semphore ******************/
#define MPU_EP_SEMAPHORE_OFFSET 0xac
#define EP_SEMAPHORE_POST_STAGE_MASK 0x0000FFFF
#define EP_SEMAPHORE_POST_ERR_MASK 0x1
#define EP_SEMAPHORE_POST_ERR_SHIFT 31
/* MPU semphore POST stage values */
#define POST_STAGE_AWAITING_HOST_RDY 0x1 /* FW awaiting goahead from host */
#define POST_STAGE_HOST_RDY 0x2 /* Host has given go-ahed to FW */
#define POST_STAGE_BE_RESET 0x3 /* Host wants to reset chip */
#define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */
/********* Memory BAR register ************/
#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc
/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
* Disable" may still globally block interrupts in addition to individual
* interrupt masks; a mechanism for the device driver to block all interrupts
* atomically without having to arbitrate for the PCI Interrupt Disable bit
* with the OS.
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
/********* ISR0 Register offset **********/
#define CEV_ISR0_OFFSET 0xC18
#define CEV_ISR_SIZE 4
/********* Event Q door bell *************/
#define DB_EQ_OFFSET DB_CQ_OFFSET
#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
/* Clear the interrupt for this eq */
#define DB_EQ_CLR_SHIFT (9) /* bit 9 */
/* Must be 1 */
#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
/* Number of event entries processed */
#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
/* Rearm bit */
#define DB_EQ_REARM_SHIFT (29) /* bit 29 */
/********* Compl Q door bell *************/
#define DB_CQ_OFFSET 0x120
#define DB_CQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
/* Number of event entries processed */
#define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
/* Rearm bit */
#define DB_CQ_REARM_SHIFT (29) /* bit 29 */
/********** TX ULP door bell *************/
#define DB_TXULP1_OFFSET 0x60
#define DB_TXULP_RING_ID_MASK 0x7FF /* bits 0 - 10 */
/* Number of tx entries posted */
#define DB_TXULP_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
#define DB_TXULP_NUM_POSTED_MASK 0x3FFF /* bits 16 - 29 */
/********** RQ(erx) door bell ************/
#define DB_RQ_OFFSET 0x100
#define DB_RQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
/* Number of rx frags posted */
#define DB_RQ_NUM_POSTED_SHIFT (24) /* bits 24 - 31 */
/********** MCC door bell ************/
#define DB_MCCQ_OFFSET 0x140
#define DB_MCCQ_RING_ID_MASK 0x7FF /* bits 0 - 10 */
/* Number of entries posted */
#define DB_MCCQ_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
/*
* BE descriptors: host memory data structures whose formats
* are hardwired in BE silicon.
*/
/* Event Queue Descriptor */
#define EQ_ENTRY_VALID_MASK 0x1 /* bit 0 */
#define EQ_ENTRY_RES_ID_MASK 0xFFFF /* bits 16 - 31 */
#define EQ_ENTRY_RES_ID_SHIFT 16
struct be_eq_entry {
u32 evt;
};
/* TX Queue Descriptor */
#define ETH_WRB_FRAG_LEN_MASK 0xFFFF
struct be_eth_wrb {
u32 frag_pa_hi; /* dword 0 */
u32 frag_pa_lo; /* dword 1 */
u32 rsvd0; /* dword 2 */
u32 frag_len; /* dword 3: bits 0 - 15 */
} __packed;
/* Pseudo amap definition for eth_hdr_wrb in which each bit of the
* actual structure is defined as a byte : used to calculate
* offset/shift/mask of each field */
struct amap_eth_hdr_wrb {
u8 rsvd0[32]; /* dword 0 */
u8 rsvd1[32]; /* dword 1 */
u8 complete; /* dword 2 */
u8 event;
u8 crc;
u8 forward;
u8 ipsec;
u8 mgmt;
u8 ipcs;
u8 udpcs;
u8 tcpcs;
u8 lso;
u8 vlan;
u8 gso[2];
u8 num_wrb[5];
u8 lso_mss[14];
u8 len[16]; /* dword 3 */
u8 vlan_tag[16];
} __packed;
struct be_eth_hdr_wrb {
u32 dw[4];
};
/* TX Compl Queue Descriptor */
/* Pseudo amap definition for eth_tx_compl in which each bit of the
* actual structure is defined as a byte: used to calculate
* offset/shift/mask of each field */
struct amap_eth_tx_compl {
u8 wrb_index[16]; /* dword 0 */
u8 ct[2]; /* dword 0 */
u8 port[2]; /* dword 0 */
u8 rsvd0[8]; /* dword 0 */
u8 status[4]; /* dword 0 */
u8 user_bytes[16]; /* dword 1 */
u8 nwh_bytes[8]; /* dword 1 */
u8 lso; /* dword 1 */
u8 cast_enc[2]; /* dword 1 */
u8 rsvd1[5]; /* dword 1 */
u8 rsvd2[32]; /* dword 2 */
u8 pkts[16]; /* dword 3 */
u8 ringid[11]; /* dword 3 */
u8 hash_val[4]; /* dword 3 */
u8 valid; /* dword 3 */
} __packed;
struct be_eth_tx_compl {
u32 dw[4];
};
/* RX Queue Descriptor */
struct be_eth_rx_d {
u32 fragpa_hi;
u32 fragpa_lo;
};
/* RX Compl Queue Descriptor */
/* Pseudo amap definition for eth_rx_compl in which each bit of the
* actual structure is defined as a byte: used to calculate
* offset/shift/mask of each field */
struct amap_eth_rx_compl {
u8 vlan_tag[16]; /* dword 0 */
u8 pktsize[14]; /* dword 0 */
u8 port; /* dword 0 */
u8 ip_opt; /* dword 0 */
u8 err; /* dword 1 */
u8 rsshp; /* dword 1 */
u8 ipf; /* dword 1 */
u8 tcpf; /* dword 1 */
u8 udpf; /* dword 1 */
u8 ipcksm; /* dword 1 */
u8 l4_cksm; /* dword 1 */
u8 ip_version; /* dword 1 */
u8 macdst[6]; /* dword 1 */
u8 vtp; /* dword 1 */
u8 rsvd0; /* dword 1 */
u8 fragndx[10]; /* dword 1 */
u8 ct[2]; /* dword 1 */
u8 sw; /* dword 1 */
u8 numfrags[3]; /* dword 1 */
u8 rss_flush; /* dword 2 */
u8 cast_enc[2]; /* dword 2 */
u8 vtm; /* dword 2 */
u8 rss_bank; /* dword 2 */
u8 rsvd1[23]; /* dword 2 */
u8 lro_pkt; /* dword 2 */
u8 rsvd2[2]; /* dword 2 */
u8 valid; /* dword 2 */
u8 rsshash[32]; /* dword 3 */
} __packed;
struct be_eth_rx_compl {
u32 dw[4];
};
/* Flashrom related descriptors */
#define IMAGE_TYPE_FIRMWARE 160
#define IMAGE_TYPE_BOOTCODE 224
#define IMAGE_TYPE_OPTIONROM 32
#define NUM_FLASHDIR_ENTRIES 32
#define FLASHROM_TYPE_ISCSI_ACTIVE 0
#define FLASHROM_TYPE_BIOS 2
#define FLASHROM_TYPE_PXE_BIOS 3
#define FLASHROM_TYPE_FCOE_BIOS 8
#define FLASHROM_TYPE_ISCSI_BACKUP 9
#define FLASHROM_TYPE_FCOE_FW_ACTIVE 10
#define FLASHROM_TYPE_FCOE_FW_BACKUP 11
#define FLASHROM_OPER_FLASH 1
#define FLASHROM_OPER_SAVE 2
#define FLASH_IMAGE_MAX_SIZE (1310720) /* Max firmware image size */
#define FLASH_BIOS_IMAGE_MAX_SIZE (262144) /* Max OPTION ROM image sz */
/* Offsets for components on Flash. */
#define FLASH_iSCSI_PRIMARY_IMAGE_START (1048576)
#define FLASH_iSCSI_BACKUP_IMAGE_START (2359296)
#define FLASH_FCoE_PRIMARY_IMAGE_START (3670016)
#define FLASH_FCoE_BACKUP_IMAGE_START (4980736)
#define FLASH_iSCSI_BIOS_START (7340032)
#define FLASH_PXE_BIOS_START (7864320)
#define FLASH_FCoE_BIOS_START (524288)
struct controller_id {
u32 vendor;
u32 device;
u32 subvendor;
u32 subdevice;
};
struct flash_file_hdr {
u8 sign[32];
u32 cksum;
u32 antidote;
struct controller_id cont_id;
u32 file_len;
u32 chunk_num;
u32 total_chunks;
u32 num_imgs;
u8 build[24];
};
struct flash_section_hdr {
u32 format_rev;
u32 cksum;
u32 antidote;
u32 build_no;
u8 id_string[64];
u32 active_entry_mask;
u32 valid_entry_mask;
u32 org_content_mask;
u32 rsvd0;
u32 rsvd1;
u32 rsvd2;
u32 rsvd3;
u32 rsvd4;
};
struct flash_section_entry {
u32 type;
u32 offset;
u32 pad_size;
u32 image_size;
u32 cksum;
u32 entry_point;
u32 rsvd0;
u32 rsvd1;
u8 ver_data[32];
};
struct flash_section_info {
u8 cookie[32];
struct flash_section_hdr fsec_hdr;
struct flash_section_entry fsec_entry[32];
};
Reference in New Issue View Git Blame Copy Permalink