linux/drivers/edac/synopsys_edac.c
Fabian Frederick 1afaa05515 EDAC: Constify of_device_id array
of_device_id is always used as const. See driver.of_match_table and open
firmware functions.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Johannes Thumshirn <johannes.thumshirn@men.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1426535685-25996-10-git-send-email-fabf@skynet.be
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-03-20 17:50:07 +01:00

536 lines
13 KiB
C

/*
* Synopsys DDR ECC Driver
* This driver is based on ppc4xx_edac.c drivers
*
* Copyright (C) 2012 - 2014 Xilinx, Inc.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details
*/
#include <linux/edac.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "edac_core.h"
/* Number of cs_rows needed per memory controller */
#define SYNPS_EDAC_NR_CSROWS 1
/* Number of channels per memory controller */
#define SYNPS_EDAC_NR_CHANS 1
/* Granularity of reported error in bytes */
#define SYNPS_EDAC_ERR_GRAIN 1
#define SYNPS_EDAC_MSG_SIZE 256
#define SYNPS_EDAC_MOD_STRING "synps_edac"
#define SYNPS_EDAC_MOD_VER "1"
/* Synopsys DDR memory controller registers that are relevant to ECC */
#define CTRL_OFST 0x0
#define T_ZQ_OFST 0xA4
/* ECC control register */
#define ECC_CTRL_OFST 0xC4
/* ECC log register */
#define CE_LOG_OFST 0xC8
/* ECC address register */
#define CE_ADDR_OFST 0xCC
/* ECC data[31:0] register */
#define CE_DATA_31_0_OFST 0xD0
/* Uncorrectable error info registers */
#define UE_LOG_OFST 0xDC
#define UE_ADDR_OFST 0xE0
#define UE_DATA_31_0_OFST 0xE4
#define STAT_OFST 0xF0
#define SCRUB_OFST 0xF4
/* Control register bit field definitions */
#define CTRL_BW_MASK 0xC
#define CTRL_BW_SHIFT 2
#define DDRCTL_WDTH_16 1
#define DDRCTL_WDTH_32 0
/* ZQ register bit field definitions */
#define T_ZQ_DDRMODE_MASK 0x2
/* ECC control register bit field definitions */
#define ECC_CTRL_CLR_CE_ERR 0x2
#define ECC_CTRL_CLR_UE_ERR 0x1
/* ECC correctable/uncorrectable error log register definitions */
#define LOG_VALID 0x1
#define CE_LOG_BITPOS_MASK 0xFE
#define CE_LOG_BITPOS_SHIFT 1
/* ECC correctable/uncorrectable error address register definitions */
#define ADDR_COL_MASK 0xFFF
#define ADDR_ROW_MASK 0xFFFF000
#define ADDR_ROW_SHIFT 12
#define ADDR_BANK_MASK 0x70000000
#define ADDR_BANK_SHIFT 28
/* ECC statistic register definitions */
#define STAT_UECNT_MASK 0xFF
#define STAT_CECNT_MASK 0xFF00
#define STAT_CECNT_SHIFT 8
/* ECC scrub register definitions */
#define SCRUB_MODE_MASK 0x7
#define SCRUB_MODE_SECDED 0x4
/**
* struct ecc_error_info - ECC error log information
* @row: Row number
* @col: Column number
* @bank: Bank number
* @bitpos: Bit position
* @data: Data causing the error
*/
struct ecc_error_info {
u32 row;
u32 col;
u32 bank;
u32 bitpos;
u32 data;
};
/**
* struct synps_ecc_status - ECC status information to report
* @ce_cnt: Correctable error count
* @ue_cnt: Uncorrectable error count
* @ceinfo: Correctable error log information
* @ueinfo: Uncorrectable error log information
*/
struct synps_ecc_status {
u32 ce_cnt;
u32 ue_cnt;
struct ecc_error_info ceinfo;
struct ecc_error_info ueinfo;
};
/**
* struct synps_edac_priv - DDR memory controller private instance data
* @baseaddr: Base address of the DDR controller
* @message: Buffer for framing the event specific info
* @stat: ECC status information
* @ce_cnt: Correctable Error count
* @ue_cnt: Uncorrectable Error count
*/
struct synps_edac_priv {
void __iomem *baseaddr;
char message[SYNPS_EDAC_MSG_SIZE];
struct synps_ecc_status stat;
u32 ce_cnt;
u32 ue_cnt;
};
/**
* synps_edac_geterror_info - Get the current ecc error info
* @base: Pointer to the base address of the ddr memory controller
* @p: Pointer to the synopsys ecc status structure
*
* Determines there is any ecc error or not
*
* Return: one if there is no error otherwise returns zero
*/
static int synps_edac_geterror_info(void __iomem *base,
struct synps_ecc_status *p)
{
u32 regval, clearval = 0;
regval = readl(base + STAT_OFST);
if (!regval)
return 1;
p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT;
p->ue_cnt = regval & STAT_UECNT_MASK;
regval = readl(base + CE_LOG_OFST);
if (!(p->ce_cnt && (regval & LOG_VALID)))
goto ue_err;
p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT;
regval = readl(base + CE_ADDR_OFST);
p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
p->ceinfo.col = regval & ADDR_COL_MASK;
p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
edac_dbg(3, "ce bit position: %d data: %d\n", p->ceinfo.bitpos,
p->ceinfo.data);
clearval = ECC_CTRL_CLR_CE_ERR;
ue_err:
regval = readl(base + UE_LOG_OFST);
if (!(p->ue_cnt && (regval & LOG_VALID)))
goto out;
regval = readl(base + UE_ADDR_OFST);
p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
p->ueinfo.col = regval & ADDR_COL_MASK;
p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
clearval |= ECC_CTRL_CLR_UE_ERR;
out:
writel(clearval, base + ECC_CTRL_OFST);
writel(0x0, base + ECC_CTRL_OFST);
return 0;
}
/**
* synps_edac_handle_error - Handle controller error types CE and UE
* @mci: Pointer to the edac memory controller instance
* @p: Pointer to the synopsys ecc status structure
*
* Handles the controller ECC correctable and un correctable error.
*/
static void synps_edac_handle_error(struct mem_ctl_info *mci,
struct synps_ecc_status *p)
{
struct synps_edac_priv *priv = mci->pvt_info;
struct ecc_error_info *pinf;
if (p->ce_cnt) {
pinf = &p->ceinfo;
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"DDR ECC error type :%s Row %d Bank %d Col %d ",
"CE", pinf->row, pinf->bank, pinf->col);
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
p->ce_cnt, 0, 0, 0, 0, 0, -1,
priv->message, "");
}
if (p->ue_cnt) {
pinf = &p->ueinfo;
snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
"DDR ECC error type :%s Row %d Bank %d Col %d ",
"UE", pinf->row, pinf->bank, pinf->col);
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
p->ue_cnt, 0, 0, 0, 0, 0, -1,
priv->message, "");
}
memset(p, 0, sizeof(*p));
}
/**
* synps_edac_check - Check controller for ECC errors
* @mci: Pointer to the edac memory controller instance
*
* Used to check and post ECC errors. Called by the polling thread
*/
static void synps_edac_check(struct mem_ctl_info *mci)
{
struct synps_edac_priv *priv = mci->pvt_info;
int status;
status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
if (status)
return;
priv->ce_cnt += priv->stat.ce_cnt;
priv->ue_cnt += priv->stat.ue_cnt;
synps_edac_handle_error(mci, &priv->stat);
edac_dbg(3, "Total error count ce %d ue %d\n",
priv->ce_cnt, priv->ue_cnt);
}
/**
* synps_edac_get_dtype - Return the controller memory width
* @base: Pointer to the ddr memory controller base address
*
* Get the EDAC device type width appropriate for the current controller
* configuration.
*
* Return: a device type width enumeration.
*/
static enum dev_type synps_edac_get_dtype(const void __iomem *base)
{
enum dev_type dt;
u32 width;
width = readl(base + CTRL_OFST);
width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
switch (width) {
case DDRCTL_WDTH_16:
dt = DEV_X2;
break;
case DDRCTL_WDTH_32:
dt = DEV_X4;
break;
default:
dt = DEV_UNKNOWN;
}
return dt;
}
/**
* synps_edac_get_eccstate - Return the controller ecc enable/disable status
* @base: Pointer to the ddr memory controller base address
*
* Get the ECC enable/disable status for the controller
*
* Return: a ecc status boolean i.e true/false - enabled/disabled.
*/
static bool synps_edac_get_eccstate(void __iomem *base)
{
enum dev_type dt;
u32 ecctype;
bool state = false;
dt = synps_edac_get_dtype(base);
if (dt == DEV_UNKNOWN)
return state;
ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
state = true;
return state;
}
/**
* synps_edac_get_memsize - reads the size of the attached memory device
*
* Return: the memory size in bytes
*/
static u32 synps_edac_get_memsize(void)
{
struct sysinfo inf;
si_meminfo(&inf);
return inf.totalram * inf.mem_unit;
}
/**
* synps_edac_get_mtype - Returns controller memory type
* @base: pointer to the synopsys ecc status structure
*
* Get the EDAC memory type appropriate for the current controller
* configuration.
*
* Return: a memory type enumeration.
*/
static enum mem_type synps_edac_get_mtype(const void __iomem *base)
{
enum mem_type mt;
u32 memtype;
memtype = readl(base + T_ZQ_OFST);
if (memtype & T_ZQ_DDRMODE_MASK)
mt = MEM_DDR3;
else
mt = MEM_DDR2;
return mt;
}
/**
* synps_edac_init_csrows - Initialize the cs row data
* @mci: Pointer to the edac memory controller instance
*
* Initializes the chip select rows associated with the EDAC memory
* controller instance
*
* Return: Unconditionally 0.
*/
static int synps_edac_init_csrows(struct mem_ctl_info *mci)
{
struct csrow_info *csi;
struct dimm_info *dimm;
struct synps_edac_priv *priv = mci->pvt_info;
u32 size;
int row, j;
for (row = 0; row < mci->nr_csrows; row++) {
csi = mci->csrows[row];
size = synps_edac_get_memsize();
for (j = 0; j < csi->nr_channels; j++) {
dimm = csi->channels[j]->dimm;
dimm->edac_mode = EDAC_FLAG_SECDED;
dimm->mtype = synps_edac_get_mtype(priv->baseaddr);
dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels;
dimm->grain = SYNPS_EDAC_ERR_GRAIN;
dimm->dtype = synps_edac_get_dtype(priv->baseaddr);
}
}
return 0;
}
/**
* synps_edac_mc_init - Initialize driver instance
* @mci: Pointer to the edac memory controller instance
* @pdev: Pointer to the platform_device struct
*
* Performs initialization of the EDAC memory controller instance and
* related driver-private data associated with the memory controller the
* instance is bound to.
*
* Return: Always zero.
*/
static int synps_edac_mc_init(struct mem_ctl_info *mci,
struct platform_device *pdev)
{
int status;
struct synps_edac_priv *priv;
mci->pdev = &pdev->dev;
priv = mci->pvt_info;
platform_set_drvdata(pdev, mci);
/* Initialize controller capabilities and configuration */
mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->scrub_cap = SCRUB_HW_SRC;
mci->scrub_mode = SCRUB_NONE;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->ctl_name = "synps_ddr_controller";
mci->dev_name = SYNPS_EDAC_MOD_STRING;
mci->mod_name = SYNPS_EDAC_MOD_VER;
mci->mod_ver = "1";
edac_op_state = EDAC_OPSTATE_POLL;
mci->edac_check = synps_edac_check;
mci->ctl_page_to_phys = NULL;
status = synps_edac_init_csrows(mci);
return status;
}
/**
* synps_edac_mc_probe - Check controller and bind driver
* @pdev: Pointer to the platform_device struct
*
* Probes a specific controller instance for binding with the driver.
*
* Return: 0 if the controller instance was successfully bound to the
* driver; otherwise, < 0 on error.
*/
static int synps_edac_mc_probe(struct platform_device *pdev)
{
struct mem_ctl_info *mci;
struct edac_mc_layer layers[2];
struct synps_edac_priv *priv;
int rc;
struct resource *res;
void __iomem *baseaddr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
baseaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(baseaddr))
return PTR_ERR(baseaddr);
if (!synps_edac_get_eccstate(baseaddr)) {
edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
return -ENXIO;
}
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
layers[0].size = SYNPS_EDAC_NR_CSROWS;
layers[0].is_virt_csrow = true;
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = SYNPS_EDAC_NR_CHANS;
layers[1].is_virt_csrow = false;
mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
sizeof(struct synps_edac_priv));
if (!mci) {
edac_printk(KERN_ERR, EDAC_MC,
"Failed memory allocation for mc instance\n");
return -ENOMEM;
}
priv = mci->pvt_info;
priv->baseaddr = baseaddr;
rc = synps_edac_mc_init(mci, pdev);
if (rc) {
edac_printk(KERN_ERR, EDAC_MC,
"Failed to initialize instance\n");
goto free_edac_mc;
}
rc = edac_mc_add_mc(mci);
if (rc) {
edac_printk(KERN_ERR, EDAC_MC,
"Failed to register with EDAC core\n");
goto free_edac_mc;
}
/*
* Start capturing the correctable and uncorrectable errors. A write of
* 0 starts the counters.
*/
writel(0x0, baseaddr + ECC_CTRL_OFST);
return rc;
free_edac_mc:
edac_mc_free(mci);
return rc;
}
/**
* synps_edac_mc_remove - Unbind driver from controller
* @pdev: Pointer to the platform_device struct
*
* Return: Unconditionally 0
*/
static int synps_edac_mc_remove(struct platform_device *pdev)
{
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
edac_mc_del_mc(&pdev->dev);
edac_mc_free(mci);
return 0;
}
static const struct of_device_id synps_edac_match[] = {
{ .compatible = "xlnx,zynq-ddrc-a05", },
{ /* end of table */ }
};
MODULE_DEVICE_TABLE(of, synps_edac_match);
static struct platform_driver synps_edac_mc_driver = {
.driver = {
.name = "synopsys-edac",
.of_match_table = synps_edac_match,
},
.probe = synps_edac_mc_probe,
.remove = synps_edac_mc_remove,
};
module_platform_driver(synps_edac_mc_driver);
MODULE_AUTHOR("Xilinx Inc");
MODULE_DESCRIPTION("Synopsys DDR ECC driver");
MODULE_LICENSE("GPL v2");