linux/drivers/usb
Minas Harutyunyan 4d4f1e79b8 usb: dwc2: gadget: ISOC's starting flow improvement
To start ISOC transfers in handlers dwc2_gadget_handle_nak() and
dwc2_gadget_handle_out_token_ep_disabled() driver reads current frame
number, based on which, set target frame number to start first ISOC
transfer.

In case if system's high IRQ latency and multiple EP's asserted
interrupt in same frame, there are high probability that when reading
current frame number in EP's handlers, actual frame number can be
increased. As result for bInterval > 1, starting target frame
will be set wrongly and all ISOC packets will be dropped.

In patch "usb: dwc2: Change reading of current frame number flow"
reading of current frame number done ASAP in common interrupt handler.
This frame number stored in frame_number variable which used as
starting frame number for ISOC EP's in above mentioned handlers.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30 10:39:18 +03:00
..
atm
c67x00
chipidea usb: chipidea: host: fix disconnection detect issue 2018-06-26 09:59:34 +08:00
class usb: cdc_acm: Add quirk for Uniden UBC125 scanner 2018-06-25 21:36:45 +08:00
common usb: common: Small class for USB role switches 2018-03-22 13:40:10 +01:00
core usb: quirks: add delay quirks for Corsair Strafe 2018-07-06 16:28:31 +02:00
dwc2 usb: dwc2: gadget: ISOC's starting flow improvement 2018-07-30 10:39:18 +03:00
dwc3 usb: dwc3: core: Enable AutoRetry feature in the controller 2018-07-30 10:39:18 +03:00
early
gadget usb: gadget: udc: renesas_usb3: Add register of usb role switch 2018-07-30 10:39:17 +03:00
host xhci: xhci-mem: off by one in xhci_stream_id_to_ring() 2018-07-06 16:28:31 +02:00
image
isp1760 usb: isp1760: Replace mdelay with msleep in isp1760_stop 2018-04-22 15:49:42 +02:00
misc usb: usbtest: use irqsave() in USB's complete callback 2018-07-26 13:54:02 +03:00
mon treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
mtu3 USB: mtu3: no need to check return value of debugfs_create_dir() 2018-05-31 12:54:21 +02:00
musb USB: musb: clean up debugfs file and directory creation 2018-05-31 12:54:21 +02:00
phy phy: tegra: select USB_COMMON 2018-05-31 12:50:40 +02:00
renesas_usbhs treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
roles usb: roles: intel_xhci: Enable runtime PM 2018-05-24 18:17:00 +02:00
serial USB: serial: mos7840: fix status-register error handling 2018-07-06 10:32:28 +02:00
storage treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
typec typec: tcpm: Correctly report power_supply current and voltage for non pd supply 2018-07-02 17:38:07 +02:00
usbip usbip: vhci_sysfs: fix potential Spectre v1 2018-05-24 18:14:28 +02:00
wusbcore treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
Kconfig usb: select USB_COMMON for usb role switch config 2018-04-22 15:23:37 +02:00
Makefile usb: roles: Add Intel xHCI USB role switch driver 2018-03-22 13:49:27 +01:00
README
usb-skeleton.c usb: usb-skeleton: make MODULE_LICENSE and SPDX tag match 2018-03-06 09:42:07 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.