forked from Minki/linux
4bd5259e53
Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
129 lines
5.0 KiB
C
129 lines
5.0 KiB
C
/*
|
|
* OMAP2xxx Power/Reset Management (PRM) register definitions
|
|
*
|
|
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
|
|
* Copyright (C) 2008-2010 Nokia Corporation
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* The PRM hardware modules on the OMAP2/3 are quite similar to each
|
|
* other. The PRM on OMAP4 has a new register layout, and is handled
|
|
* in a separate file.
|
|
*/
|
|
#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
|
|
#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
|
|
|
|
#include "prcm-common.h"
|
|
#include "prm.h"
|
|
#include "prm2xxx_3xxx.h"
|
|
|
|
#define OMAP2420_PRM_REGADDR(module, reg) \
|
|
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
|
|
#define OMAP2430_PRM_REGADDR(module, reg) \
|
|
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
|
|
|
|
/*
|
|
* OMAP2-specific global PRM registers
|
|
* Use __raw_{read,write}l() with these registers.
|
|
*
|
|
* With a few exceptions, these are the register names beginning with
|
|
* PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
|
|
* bits.)
|
|
*
|
|
*/
|
|
|
|
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
|
|
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
|
|
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
|
|
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
|
|
|
|
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
|
|
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
|
|
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
|
|
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
|
|
|
|
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
|
|
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
|
|
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
|
|
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
|
|
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
|
|
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
|
|
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
|
|
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
|
|
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
|
|
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
|
|
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
|
|
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
|
|
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
|
|
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
|
|
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
|
|
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
|
|
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
|
|
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
|
|
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
|
|
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
|
|
|
|
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
|
|
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
|
|
|
|
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
|
|
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
|
|
|
|
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
|
|
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
|
|
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
|
|
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
|
|
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
|
|
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
|
|
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
|
|
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
|
|
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
|
|
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
|
|
|
|
/*
|
|
* Module specific PRM register offsets from PRM_BASE + domain offset
|
|
*
|
|
* Use prm_{read,write}_mod_reg() with these registers.
|
|
*
|
|
* With a few exceptions, these are the register names beginning with
|
|
* {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
|
|
* IRQSTATUS and IRQENABLE bits.)
|
|
*/
|
|
|
|
/* Register offsets appearing on both OMAP2 and OMAP3 */
|
|
|
|
#define OMAP2_RM_RSTCTRL 0x0050
|
|
#define OMAP2_RM_RSTTIME 0x0054
|
|
#define OMAP2_RM_RSTST 0x0058
|
|
#define OMAP2_PM_PWSTCTRL 0x00e0
|
|
#define OMAP2_PM_PWSTST 0x00e4
|
|
|
|
#define PM_WKEN 0x00a0
|
|
#define PM_WKEN1 PM_WKEN
|
|
#define PM_WKST 0x00b0
|
|
#define PM_WKST1 PM_WKST
|
|
#define PM_WKDEP 0x00c8
|
|
#define PM_EVGENCTRL 0x00d4
|
|
#define PM_EVGENONTIM 0x00d8
|
|
#define PM_EVGENOFFTIM 0x00dc
|
|
|
|
/* OMAP2xxx specific register offsets */
|
|
#define OMAP24XX_PM_WKEN2 0x00a4
|
|
#define OMAP24XX_PM_WKST2 0x00b4
|
|
|
|
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
|
|
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
|
|
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
|
|
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
|
|
|
|
#ifndef __ASSEMBLER__
|
|
/* Function prototypes */
|
|
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
|
|
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
|
|
#endif
|
|
|
|
#endif
|