forked from Minki/linux
91466574be
Pull thermal management updates from Zhang Rui: "This time, the biggest change is the work of representing hardware thermal properties in device tree infrastructure. This work includes the introduction of a device tree bindings for describing the hardware thermal behavior and limits, and also a parser to read and interpret the data, and build thermal zones and thermal binding parameters. It also contains three examples on how to use the new representation on sensor devices, using three different drivers to accomplish it. One driver is in thermal subsystem, the TI SoC thermal, and the other two drivers are in hwmon subsystem. Actually, this would be the first step of the complete work because we still need to check other potential drivers to be converted and then validate the proposed API. But the reason why I include it in this pull request is that, first, this change does not hurt any others without using this approach, second, the principle and concept of this change would not break after converting the remaining drivers. BTW, as you can see, there are several points in this change that do not belong to thermal subsystem. Because it has been suggested by Guenter R that in such cases, it is recommended to send the complete series via one single subsystem. Specifics: - representing hardware thermal properties in device tree infrastructure - fix a regression that the imx thermal driver breaks system suspend. - introduce ACPI INT3403 thermal driver to retrieve temperature data from the INT3403 ACPI device object present on some systems. - introduce debug statement for thermal core and step_wise governor. - assorted fixes and cleanups for thermal core, cpu cooling, exynos thrmal, intel powerclamp and imx thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits) thermal: remove const flag from .ops of imx thermal Thermal: update thermal zone device after setting emul_temp intel_powerclamp: Fix cstate counter detection. thermal: imx: add necessary clk operation Thermal cpu cooling: return error if no valid cpu frequency entry thermal: fix cpu_cooling max_level behavior thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST thermal: debug: add debug statement for core and step_wise thermal: imx_thermal: add module device table drivers: thermal: Mark function as static in x86_pkg_temp_thermal.c thermal:samsung: fix compilation warning thermal: imx: correct suspend/resume flow thermal: exynos: fix error return code Thermal: ACPI INT3403 thermal driver MAINTAINERS: add thermal bindings entry in thermal domain arm: dts: make OMAP4460 bandgap node to belong to OCP arm: dts: make OMAP443x bandgap node to belong to OCP arm: dts: add cooling properties on omap5 cpu node arm: dts: add omap5 thermal data arm: dts: add omap5 CORE thermal data ...
826 lines
21 KiB
C
826 lines
21 KiB
C
/*
|
|
* intel_powerclamp.c - package c-state idle injection
|
|
*
|
|
* Copyright (c) 2012, Intel Corporation.
|
|
*
|
|
* Authors:
|
|
* Arjan van de Ven <arjan@linux.intel.com>
|
|
* Jacob Pan <jacob.jun.pan@linux.intel.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*
|
|
*
|
|
* TODO:
|
|
* 1. better handle wakeup from external interrupts, currently a fixed
|
|
* compensation is added to clamping duration when excessive amount
|
|
* of wakeups are observed during idle time. the reason is that in
|
|
* case of external interrupts without need for ack, clamping down
|
|
* cpu in non-irq context does not reduce irq. for majority of the
|
|
* cases, clamping down cpu does help reduce irq as well, we should
|
|
* be able to differenciate the two cases and give a quantitative
|
|
* solution for the irqs that we can control. perhaps based on
|
|
* get_cpu_iowait_time_us()
|
|
*
|
|
* 2. synchronization with other hw blocks
|
|
*
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tick.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/sched/rt.h>
|
|
|
|
#include <asm/nmi.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/mwait.h>
|
|
#include <asm/cpu_device_id.h>
|
|
#include <asm/idle.h>
|
|
#include <asm/hardirq.h>
|
|
|
|
#define MAX_TARGET_RATIO (50U)
|
|
/* For each undisturbed clamping period (no extra wake ups during idle time),
|
|
* we increment the confidence counter for the given target ratio.
|
|
* CONFIDENCE_OK defines the level where runtime calibration results are
|
|
* valid.
|
|
*/
|
|
#define CONFIDENCE_OK (3)
|
|
/* Default idle injection duration, driver adjust sleep time to meet target
|
|
* idle ratio. Similar to frequency modulation.
|
|
*/
|
|
#define DEFAULT_DURATION_JIFFIES (6)
|
|
|
|
static unsigned int target_mwait;
|
|
static struct dentry *debug_dir;
|
|
|
|
/* user selected target */
|
|
static unsigned int set_target_ratio;
|
|
static unsigned int current_ratio;
|
|
static bool should_skip;
|
|
static bool reduce_irq;
|
|
static atomic_t idle_wakeup_counter;
|
|
static unsigned int control_cpu; /* The cpu assigned to collect stat and update
|
|
* control parameters. default to BSP but BSP
|
|
* can be offlined.
|
|
*/
|
|
static bool clamping;
|
|
|
|
|
|
static struct task_struct * __percpu *powerclamp_thread;
|
|
static struct thermal_cooling_device *cooling_dev;
|
|
static unsigned long *cpu_clamping_mask; /* bit map for tracking per cpu
|
|
* clamping thread
|
|
*/
|
|
|
|
static unsigned int duration;
|
|
static unsigned int pkg_cstate_ratio_cur;
|
|
static unsigned int window_size;
|
|
|
|
static int duration_set(const char *arg, const struct kernel_param *kp)
|
|
{
|
|
int ret = 0;
|
|
unsigned long new_duration;
|
|
|
|
ret = kstrtoul(arg, 10, &new_duration);
|
|
if (ret)
|
|
goto exit;
|
|
if (new_duration > 25 || new_duration < 6) {
|
|
pr_err("Out of recommended range %lu, between 6-25ms\n",
|
|
new_duration);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
duration = clamp(new_duration, 6ul, 25ul);
|
|
smp_mb();
|
|
|
|
exit:
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct kernel_param_ops duration_ops = {
|
|
.set = duration_set,
|
|
.get = param_get_int,
|
|
};
|
|
|
|
|
|
module_param_cb(duration, &duration_ops, &duration, 0644);
|
|
MODULE_PARM_DESC(duration, "forced idle time for each attempt in msec.");
|
|
|
|
struct powerclamp_calibration_data {
|
|
unsigned long confidence; /* used for calibration, basically a counter
|
|
* gets incremented each time a clamping
|
|
* period is completed without extra wakeups
|
|
* once that counter is reached given level,
|
|
* compensation is deemed usable.
|
|
*/
|
|
unsigned long steady_comp; /* steady state compensation used when
|
|
* no extra wakeups occurred.
|
|
*/
|
|
unsigned long dynamic_comp; /* compensate excessive wakeup from idle
|
|
* mostly from external interrupts.
|
|
*/
|
|
};
|
|
|
|
static struct powerclamp_calibration_data cal_data[MAX_TARGET_RATIO];
|
|
|
|
static int window_size_set(const char *arg, const struct kernel_param *kp)
|
|
{
|
|
int ret = 0;
|
|
unsigned long new_window_size;
|
|
|
|
ret = kstrtoul(arg, 10, &new_window_size);
|
|
if (ret)
|
|
goto exit_win;
|
|
if (new_window_size > 10 || new_window_size < 2) {
|
|
pr_err("Out of recommended window size %lu, between 2-10\n",
|
|
new_window_size);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
window_size = clamp(new_window_size, 2ul, 10ul);
|
|
smp_mb();
|
|
|
|
exit_win:
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct kernel_param_ops window_size_ops = {
|
|
.set = window_size_set,
|
|
.get = param_get_int,
|
|
};
|
|
|
|
module_param_cb(window_size, &window_size_ops, &window_size, 0644);
|
|
MODULE_PARM_DESC(window_size, "sliding window in number of clamping cycles\n"
|
|
"\tpowerclamp controls idle ratio within this window. larger\n"
|
|
"\twindow size results in slower response time but more smooth\n"
|
|
"\tclamping results. default to 2.");
|
|
|
|
static void find_target_mwait(void)
|
|
{
|
|
unsigned int eax, ebx, ecx, edx;
|
|
unsigned int highest_cstate = 0;
|
|
unsigned int highest_subcstate = 0;
|
|
int i;
|
|
|
|
if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
|
|
return;
|
|
|
|
cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
|
|
|
|
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
|
|
!(ecx & CPUID5_ECX_INTERRUPT_BREAK))
|
|
return;
|
|
|
|
edx >>= MWAIT_SUBSTATE_SIZE;
|
|
for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
|
|
if (edx & MWAIT_SUBSTATE_MASK) {
|
|
highest_cstate = i;
|
|
highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
|
|
}
|
|
}
|
|
target_mwait = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
|
|
(highest_subcstate - 1);
|
|
|
|
}
|
|
|
|
static bool has_pkg_state_counter(void)
|
|
{
|
|
u64 tmp;
|
|
return !rdmsrl_safe(MSR_PKG_C2_RESIDENCY, &tmp) ||
|
|
!rdmsrl_safe(MSR_PKG_C3_RESIDENCY, &tmp) ||
|
|
!rdmsrl_safe(MSR_PKG_C6_RESIDENCY, &tmp) ||
|
|
!rdmsrl_safe(MSR_PKG_C7_RESIDENCY, &tmp);
|
|
}
|
|
|
|
static u64 pkg_state_counter(void)
|
|
{
|
|
u64 val;
|
|
u64 count = 0;
|
|
|
|
static bool skip_c2;
|
|
static bool skip_c3;
|
|
static bool skip_c6;
|
|
static bool skip_c7;
|
|
|
|
if (!skip_c2) {
|
|
if (!rdmsrl_safe(MSR_PKG_C2_RESIDENCY, &val))
|
|
count += val;
|
|
else
|
|
skip_c2 = true;
|
|
}
|
|
|
|
if (!skip_c3) {
|
|
if (!rdmsrl_safe(MSR_PKG_C3_RESIDENCY, &val))
|
|
count += val;
|
|
else
|
|
skip_c3 = true;
|
|
}
|
|
|
|
if (!skip_c6) {
|
|
if (!rdmsrl_safe(MSR_PKG_C6_RESIDENCY, &val))
|
|
count += val;
|
|
else
|
|
skip_c6 = true;
|
|
}
|
|
|
|
if (!skip_c7) {
|
|
if (!rdmsrl_safe(MSR_PKG_C7_RESIDENCY, &val))
|
|
count += val;
|
|
else
|
|
skip_c7 = true;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static void noop_timer(unsigned long foo)
|
|
{
|
|
/* empty... just the fact that we get the interrupt wakes us up */
|
|
}
|
|
|
|
static unsigned int get_compensation(int ratio)
|
|
{
|
|
unsigned int comp = 0;
|
|
|
|
/* we only use compensation if all adjacent ones are good */
|
|
if (ratio == 1 &&
|
|
cal_data[ratio].confidence >= CONFIDENCE_OK &&
|
|
cal_data[ratio + 1].confidence >= CONFIDENCE_OK &&
|
|
cal_data[ratio + 2].confidence >= CONFIDENCE_OK) {
|
|
comp = (cal_data[ratio].steady_comp +
|
|
cal_data[ratio + 1].steady_comp +
|
|
cal_data[ratio + 2].steady_comp) / 3;
|
|
} else if (ratio == MAX_TARGET_RATIO - 1 &&
|
|
cal_data[ratio].confidence >= CONFIDENCE_OK &&
|
|
cal_data[ratio - 1].confidence >= CONFIDENCE_OK &&
|
|
cal_data[ratio - 2].confidence >= CONFIDENCE_OK) {
|
|
comp = (cal_data[ratio].steady_comp +
|
|
cal_data[ratio - 1].steady_comp +
|
|
cal_data[ratio - 2].steady_comp) / 3;
|
|
} else if (cal_data[ratio].confidence >= CONFIDENCE_OK &&
|
|
cal_data[ratio - 1].confidence >= CONFIDENCE_OK &&
|
|
cal_data[ratio + 1].confidence >= CONFIDENCE_OK) {
|
|
comp = (cal_data[ratio].steady_comp +
|
|
cal_data[ratio - 1].steady_comp +
|
|
cal_data[ratio + 1].steady_comp) / 3;
|
|
}
|
|
|
|
/* REVISIT: simple penalty of double idle injection */
|
|
if (reduce_irq)
|
|
comp = ratio;
|
|
/* do not exceed limit */
|
|
if (comp + ratio >= MAX_TARGET_RATIO)
|
|
comp = MAX_TARGET_RATIO - ratio - 1;
|
|
|
|
return comp;
|
|
}
|
|
|
|
static void adjust_compensation(int target_ratio, unsigned int win)
|
|
{
|
|
int delta;
|
|
struct powerclamp_calibration_data *d = &cal_data[target_ratio];
|
|
|
|
/*
|
|
* adjust compensations if confidence level has not been reached or
|
|
* there are too many wakeups during the last idle injection period, we
|
|
* cannot trust the data for compensation.
|
|
*/
|
|
if (d->confidence >= CONFIDENCE_OK ||
|
|
atomic_read(&idle_wakeup_counter) >
|
|
win * num_online_cpus())
|
|
return;
|
|
|
|
delta = set_target_ratio - current_ratio;
|
|
/* filter out bad data */
|
|
if (delta >= 0 && delta <= (1+target_ratio/10)) {
|
|
if (d->steady_comp)
|
|
d->steady_comp =
|
|
roundup(delta+d->steady_comp, 2)/2;
|
|
else
|
|
d->steady_comp = delta;
|
|
d->confidence++;
|
|
}
|
|
}
|
|
|
|
static bool powerclamp_adjust_controls(unsigned int target_ratio,
|
|
unsigned int guard, unsigned int win)
|
|
{
|
|
static u64 msr_last, tsc_last;
|
|
u64 msr_now, tsc_now;
|
|
u64 val64;
|
|
|
|
/* check result for the last window */
|
|
msr_now = pkg_state_counter();
|
|
rdtscll(tsc_now);
|
|
|
|
/* calculate pkg cstate vs tsc ratio */
|
|
if (!msr_last || !tsc_last)
|
|
current_ratio = 1;
|
|
else if (tsc_now-tsc_last) {
|
|
val64 = 100*(msr_now-msr_last);
|
|
do_div(val64, (tsc_now-tsc_last));
|
|
current_ratio = val64;
|
|
}
|
|
|
|
/* update record */
|
|
msr_last = msr_now;
|
|
tsc_last = tsc_now;
|
|
|
|
adjust_compensation(target_ratio, win);
|
|
/*
|
|
* too many external interrupts, set flag such
|
|
* that we can take measure later.
|
|
*/
|
|
reduce_irq = atomic_read(&idle_wakeup_counter) >=
|
|
2 * win * num_online_cpus();
|
|
|
|
atomic_set(&idle_wakeup_counter, 0);
|
|
/* if we are above target+guard, skip */
|
|
return set_target_ratio + guard <= current_ratio;
|
|
}
|
|
|
|
static int clamp_thread(void *arg)
|
|
{
|
|
int cpunr = (unsigned long)arg;
|
|
DEFINE_TIMER(wakeup_timer, noop_timer, 0, 0);
|
|
static const struct sched_param param = {
|
|
.sched_priority = MAX_USER_RT_PRIO/2,
|
|
};
|
|
unsigned int count = 0;
|
|
unsigned int target_ratio;
|
|
|
|
set_bit(cpunr, cpu_clamping_mask);
|
|
set_freezable();
|
|
init_timer_on_stack(&wakeup_timer);
|
|
sched_setscheduler(current, SCHED_FIFO, ¶m);
|
|
|
|
while (true == clamping && !kthread_should_stop() &&
|
|
cpu_online(cpunr)) {
|
|
int sleeptime;
|
|
unsigned long target_jiffies;
|
|
unsigned int guard;
|
|
unsigned int compensation = 0;
|
|
int interval; /* jiffies to sleep for each attempt */
|
|
unsigned int duration_jiffies = msecs_to_jiffies(duration);
|
|
unsigned int window_size_now;
|
|
|
|
try_to_freeze();
|
|
/*
|
|
* make sure user selected ratio does not take effect until
|
|
* the next round. adjust target_ratio if user has changed
|
|
* target such that we can converge quickly.
|
|
*/
|
|
target_ratio = set_target_ratio;
|
|
guard = 1 + target_ratio/20;
|
|
window_size_now = window_size;
|
|
count++;
|
|
|
|
/*
|
|
* systems may have different ability to enter package level
|
|
* c-states, thus we need to compensate the injected idle ratio
|
|
* to achieve the actual target reported by the HW.
|
|
*/
|
|
compensation = get_compensation(target_ratio);
|
|
interval = duration_jiffies*100/(target_ratio+compensation);
|
|
|
|
/* align idle time */
|
|
target_jiffies = roundup(jiffies, interval);
|
|
sleeptime = target_jiffies - jiffies;
|
|
if (sleeptime <= 0)
|
|
sleeptime = 1;
|
|
schedule_timeout_interruptible(sleeptime);
|
|
/*
|
|
* only elected controlling cpu can collect stats and update
|
|
* control parameters.
|
|
*/
|
|
if (cpunr == control_cpu && !(count%window_size_now)) {
|
|
should_skip =
|
|
powerclamp_adjust_controls(target_ratio,
|
|
guard, window_size_now);
|
|
smp_mb();
|
|
}
|
|
|
|
if (should_skip)
|
|
continue;
|
|
|
|
target_jiffies = jiffies + duration_jiffies;
|
|
mod_timer(&wakeup_timer, target_jiffies);
|
|
if (unlikely(local_softirq_pending()))
|
|
continue;
|
|
/*
|
|
* stop tick sched during idle time, interrupts are still
|
|
* allowed. thus jiffies are updated properly.
|
|
*/
|
|
preempt_disable();
|
|
tick_nohz_idle_enter();
|
|
/* mwait until target jiffies is reached */
|
|
while (time_before(jiffies, target_jiffies)) {
|
|
unsigned long ecx = 1;
|
|
unsigned long eax = target_mwait;
|
|
|
|
/*
|
|
* REVISIT: may call enter_idle() to notify drivers who
|
|
* can save power during cpu idle. same for exit_idle()
|
|
*/
|
|
local_touch_nmi();
|
|
stop_critical_timings();
|
|
mwait_idle_with_hints(eax, ecx);
|
|
start_critical_timings();
|
|
atomic_inc(&idle_wakeup_counter);
|
|
}
|
|
tick_nohz_idle_exit();
|
|
preempt_enable();
|
|
}
|
|
del_timer_sync(&wakeup_timer);
|
|
clear_bit(cpunr, cpu_clamping_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* 1 HZ polling while clamping is active, useful for userspace
|
|
* to monitor actual idle ratio.
|
|
*/
|
|
static void poll_pkg_cstate(struct work_struct *dummy);
|
|
static DECLARE_DELAYED_WORK(poll_pkg_cstate_work, poll_pkg_cstate);
|
|
static void poll_pkg_cstate(struct work_struct *dummy)
|
|
{
|
|
static u64 msr_last;
|
|
static u64 tsc_last;
|
|
static unsigned long jiffies_last;
|
|
|
|
u64 msr_now;
|
|
unsigned long jiffies_now;
|
|
u64 tsc_now;
|
|
u64 val64;
|
|
|
|
msr_now = pkg_state_counter();
|
|
rdtscll(tsc_now);
|
|
jiffies_now = jiffies;
|
|
|
|
/* calculate pkg cstate vs tsc ratio */
|
|
if (!msr_last || !tsc_last)
|
|
pkg_cstate_ratio_cur = 1;
|
|
else {
|
|
if (tsc_now - tsc_last) {
|
|
val64 = 100 * (msr_now - msr_last);
|
|
do_div(val64, (tsc_now - tsc_last));
|
|
pkg_cstate_ratio_cur = val64;
|
|
}
|
|
}
|
|
|
|
/* update record */
|
|
msr_last = msr_now;
|
|
jiffies_last = jiffies_now;
|
|
tsc_last = tsc_now;
|
|
|
|
if (true == clamping)
|
|
schedule_delayed_work(&poll_pkg_cstate_work, HZ);
|
|
}
|
|
|
|
static int start_power_clamp(void)
|
|
{
|
|
unsigned long cpu;
|
|
struct task_struct *thread;
|
|
|
|
/* check if pkg cstate counter is completely 0, abort in this case */
|
|
if (!has_pkg_state_counter()) {
|
|
pr_err("pkg cstate counter not functional, abort\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
set_target_ratio = clamp(set_target_ratio, 0U, MAX_TARGET_RATIO - 1);
|
|
/* prevent cpu hotplug */
|
|
get_online_cpus();
|
|
|
|
/* prefer BSP */
|
|
control_cpu = 0;
|
|
if (!cpu_online(control_cpu))
|
|
control_cpu = smp_processor_id();
|
|
|
|
clamping = true;
|
|
schedule_delayed_work(&poll_pkg_cstate_work, 0);
|
|
|
|
/* start one thread per online cpu */
|
|
for_each_online_cpu(cpu) {
|
|
struct task_struct **p =
|
|
per_cpu_ptr(powerclamp_thread, cpu);
|
|
|
|
thread = kthread_create_on_node(clamp_thread,
|
|
(void *) cpu,
|
|
cpu_to_node(cpu),
|
|
"kidle_inject/%ld", cpu);
|
|
/* bind to cpu here */
|
|
if (likely(!IS_ERR(thread))) {
|
|
kthread_bind(thread, cpu);
|
|
wake_up_process(thread);
|
|
*p = thread;
|
|
}
|
|
|
|
}
|
|
put_online_cpus();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void end_power_clamp(void)
|
|
{
|
|
int i;
|
|
struct task_struct *thread;
|
|
|
|
clamping = false;
|
|
/*
|
|
* make clamping visible to other cpus and give per cpu clamping threads
|
|
* sometime to exit, or gets killed later.
|
|
*/
|
|
smp_mb();
|
|
msleep(20);
|
|
if (bitmap_weight(cpu_clamping_mask, num_possible_cpus())) {
|
|
for_each_set_bit(i, cpu_clamping_mask, num_possible_cpus()) {
|
|
pr_debug("clamping thread for cpu %d alive, kill\n", i);
|
|
thread = *per_cpu_ptr(powerclamp_thread, i);
|
|
kthread_stop(thread);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int powerclamp_cpu_callback(struct notifier_block *nfb,
|
|
unsigned long action, void *hcpu)
|
|
{
|
|
unsigned long cpu = (unsigned long)hcpu;
|
|
struct task_struct *thread;
|
|
struct task_struct **percpu_thread =
|
|
per_cpu_ptr(powerclamp_thread, cpu);
|
|
|
|
if (false == clamping)
|
|
goto exit_ok;
|
|
|
|
switch (action) {
|
|
case CPU_ONLINE:
|
|
thread = kthread_create_on_node(clamp_thread,
|
|
(void *) cpu,
|
|
cpu_to_node(cpu),
|
|
"kidle_inject/%lu", cpu);
|
|
if (likely(!IS_ERR(thread))) {
|
|
kthread_bind(thread, cpu);
|
|
wake_up_process(thread);
|
|
*percpu_thread = thread;
|
|
}
|
|
/* prefer BSP as controlling CPU */
|
|
if (cpu == 0) {
|
|
control_cpu = 0;
|
|
smp_mb();
|
|
}
|
|
break;
|
|
case CPU_DEAD:
|
|
if (test_bit(cpu, cpu_clamping_mask)) {
|
|
pr_err("cpu %lu dead but powerclamping thread is not\n",
|
|
cpu);
|
|
kthread_stop(*percpu_thread);
|
|
}
|
|
if (cpu == control_cpu) {
|
|
control_cpu = smp_processor_id();
|
|
smp_mb();
|
|
}
|
|
}
|
|
|
|
exit_ok:
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block powerclamp_cpu_notifier = {
|
|
.notifier_call = powerclamp_cpu_callback,
|
|
};
|
|
|
|
static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *state)
|
|
{
|
|
*state = MAX_TARGET_RATIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *state)
|
|
{
|
|
if (true == clamping)
|
|
*state = pkg_cstate_ratio_cur;
|
|
else
|
|
/* to save power, do not poll idle ratio while not clamping */
|
|
*state = -1; /* indicates invalid state */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev,
|
|
unsigned long new_target_ratio)
|
|
{
|
|
int ret = 0;
|
|
|
|
new_target_ratio = clamp(new_target_ratio, 0UL,
|
|
(unsigned long) (MAX_TARGET_RATIO-1));
|
|
if (set_target_ratio == 0 && new_target_ratio > 0) {
|
|
pr_info("Start idle injection to reduce power\n");
|
|
set_target_ratio = new_target_ratio;
|
|
ret = start_power_clamp();
|
|
goto exit_set;
|
|
} else if (set_target_ratio > 0 && new_target_ratio == 0) {
|
|
pr_info("Stop forced idle injection\n");
|
|
set_target_ratio = 0;
|
|
end_power_clamp();
|
|
} else /* adjust currently running */ {
|
|
set_target_ratio = new_target_ratio;
|
|
/* make new set_target_ratio visible to other cpus */
|
|
smp_mb();
|
|
}
|
|
|
|
exit_set:
|
|
return ret;
|
|
}
|
|
|
|
/* bind to generic thermal layer as cooling device*/
|
|
static struct thermal_cooling_device_ops powerclamp_cooling_ops = {
|
|
.get_max_state = powerclamp_get_max_state,
|
|
.get_cur_state = powerclamp_get_cur_state,
|
|
.set_cur_state = powerclamp_set_cur_state,
|
|
};
|
|
|
|
/* runs on Nehalem and later */
|
|
static const struct x86_cpu_id intel_powerclamp_ids[] = {
|
|
{ X86_VENDOR_INTEL, 6, 0x1a},
|
|
{ X86_VENDOR_INTEL, 6, 0x1c},
|
|
{ X86_VENDOR_INTEL, 6, 0x1e},
|
|
{ X86_VENDOR_INTEL, 6, 0x1f},
|
|
{ X86_VENDOR_INTEL, 6, 0x25},
|
|
{ X86_VENDOR_INTEL, 6, 0x26},
|
|
{ X86_VENDOR_INTEL, 6, 0x2a},
|
|
{ X86_VENDOR_INTEL, 6, 0x2c},
|
|
{ X86_VENDOR_INTEL, 6, 0x2d},
|
|
{ X86_VENDOR_INTEL, 6, 0x2e},
|
|
{ X86_VENDOR_INTEL, 6, 0x2f},
|
|
{ X86_VENDOR_INTEL, 6, 0x3a},
|
|
{ X86_VENDOR_INTEL, 6, 0x3c},
|
|
{ X86_VENDOR_INTEL, 6, 0x3e},
|
|
{ X86_VENDOR_INTEL, 6, 0x3f},
|
|
{ X86_VENDOR_INTEL, 6, 0x45},
|
|
{ X86_VENDOR_INTEL, 6, 0x46},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
|
|
|
|
static int powerclamp_probe(void)
|
|
{
|
|
if (!x86_match_cpu(intel_powerclamp_ids)) {
|
|
pr_err("Intel powerclamp does not run on family %d model %d\n",
|
|
boot_cpu_data.x86, boot_cpu_data.x86_model);
|
|
return -ENODEV;
|
|
}
|
|
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC) ||
|
|
!boot_cpu_has(X86_FEATURE_CONSTANT_TSC) ||
|
|
!boot_cpu_has(X86_FEATURE_MWAIT) ||
|
|
!boot_cpu_has(X86_FEATURE_ARAT))
|
|
return -ENODEV;
|
|
|
|
/* find the deepest mwait value */
|
|
find_target_mwait();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int powerclamp_debug_show(struct seq_file *m, void *unused)
|
|
{
|
|
int i = 0;
|
|
|
|
seq_printf(m, "controlling cpu: %d\n", control_cpu);
|
|
seq_printf(m, "pct confidence steady dynamic (compensation)\n");
|
|
for (i = 0; i < MAX_TARGET_RATIO; i++) {
|
|
seq_printf(m, "%d\t%lu\t%lu\t%lu\n",
|
|
i,
|
|
cal_data[i].confidence,
|
|
cal_data[i].steady_comp,
|
|
cal_data[i].dynamic_comp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int powerclamp_debug_open(struct inode *inode,
|
|
struct file *file)
|
|
{
|
|
return single_open(file, powerclamp_debug_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations powerclamp_debug_fops = {
|
|
.open = powerclamp_debug_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static inline void powerclamp_create_debug_files(void)
|
|
{
|
|
debug_dir = debugfs_create_dir("intel_powerclamp", NULL);
|
|
if (!debug_dir)
|
|
return;
|
|
|
|
if (!debugfs_create_file("powerclamp_calib", S_IRUGO, debug_dir,
|
|
cal_data, &powerclamp_debug_fops))
|
|
goto file_error;
|
|
|
|
return;
|
|
|
|
file_error:
|
|
debugfs_remove_recursive(debug_dir);
|
|
}
|
|
|
|
static int powerclamp_init(void)
|
|
{
|
|
int retval;
|
|
int bitmap_size;
|
|
|
|
bitmap_size = BITS_TO_LONGS(num_possible_cpus()) * sizeof(long);
|
|
cpu_clamping_mask = kzalloc(bitmap_size, GFP_KERNEL);
|
|
if (!cpu_clamping_mask)
|
|
return -ENOMEM;
|
|
|
|
/* probe cpu features and ids here */
|
|
retval = powerclamp_probe();
|
|
if (retval)
|
|
goto exit_free;
|
|
|
|
/* set default limit, maybe adjusted during runtime based on feedback */
|
|
window_size = 2;
|
|
register_hotcpu_notifier(&powerclamp_cpu_notifier);
|
|
|
|
powerclamp_thread = alloc_percpu(struct task_struct *);
|
|
if (!powerclamp_thread) {
|
|
retval = -ENOMEM;
|
|
goto exit_unregister;
|
|
}
|
|
|
|
cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL,
|
|
&powerclamp_cooling_ops);
|
|
if (IS_ERR(cooling_dev)) {
|
|
retval = -ENODEV;
|
|
goto exit_free_thread;
|
|
}
|
|
|
|
if (!duration)
|
|
duration = jiffies_to_msecs(DEFAULT_DURATION_JIFFIES);
|
|
|
|
powerclamp_create_debug_files();
|
|
|
|
return 0;
|
|
|
|
exit_free_thread:
|
|
free_percpu(powerclamp_thread);
|
|
exit_unregister:
|
|
unregister_hotcpu_notifier(&powerclamp_cpu_notifier);
|
|
exit_free:
|
|
kfree(cpu_clamping_mask);
|
|
return retval;
|
|
}
|
|
module_init(powerclamp_init);
|
|
|
|
static void powerclamp_exit(void)
|
|
{
|
|
unregister_hotcpu_notifier(&powerclamp_cpu_notifier);
|
|
end_power_clamp();
|
|
free_percpu(powerclamp_thread);
|
|
thermal_cooling_device_unregister(cooling_dev);
|
|
kfree(cpu_clamping_mask);
|
|
|
|
cancel_delayed_work_sync(&poll_pkg_cstate_work);
|
|
debugfs_remove_recursive(debug_dir);
|
|
}
|
|
module_exit(powerclamp_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
|
|
MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
|
|
MODULE_DESCRIPTION("Package Level C-state Idle Injection for Intel CPUs");
|