forked from Minki/linux
003d922618
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time - move this static things to the blackfin board file - add pin_req array to struct bfin5xx_spi_master - tested on BF537/BF548 with SPI flash Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
170 lines
4.4 KiB
C
170 lines
4.4 KiB
C
/************************************************************
|
|
*
|
|
* Copyright (C) 2004, Analog Devices. All Rights Reserved
|
|
*
|
|
* FILE bfin5xx_spi.h
|
|
* PROGRAMMER(S): Luke Yang (Analog Devices Inc.)
|
|
*
|
|
*
|
|
* DATE OF CREATION: March. 10th 2006
|
|
*
|
|
* SYNOPSIS:
|
|
*
|
|
* DESCRIPTION: header file for SPI controller driver for Blackfin5xx.
|
|
**************************************************************
|
|
|
|
* MODIFICATION HISTORY:
|
|
* March 10, 2006 bfin5xx_spi.h Created. (Luke Yang)
|
|
|
|
************************************************************/
|
|
|
|
#ifndef _SPI_CHANNEL_H_
|
|
#define _SPI_CHANNEL_H_
|
|
|
|
#define SPI_READ 0
|
|
#define SPI_WRITE 1
|
|
|
|
#define SPI_CTRL_OFF 0x0
|
|
#define SPI_FLAG_OFF 0x4
|
|
#define SPI_STAT_OFF 0x8
|
|
#define SPI_TXBUFF_OFF 0xc
|
|
#define SPI_RXBUFF_OFF 0x10
|
|
#define SPI_BAUD_OFF 0x14
|
|
#define SPI_SHAW_OFF 0x18
|
|
|
|
#define CMD_SPI_OUT_ENABLE 1
|
|
#define CMD_SPI_SET_BAUDRATE 2
|
|
#define CMD_SPI_SET_POLAR 3
|
|
#define CMD_SPI_SET_PHASE 4
|
|
#define CMD_SPI_SET_MASTER 5
|
|
#define CMD_SPI_SET_SENDOPT 6
|
|
#define CMD_SPI_SET_RECVOPT 7
|
|
#define CMD_SPI_SET_ORDER 8
|
|
#define CMD_SPI_SET_LENGTH16 9
|
|
#define CMD_SPI_GET_STAT 11
|
|
#define CMD_SPI_GET_CFG 12
|
|
#define CMD_SPI_SET_CSAVAIL 13
|
|
#define CMD_SPI_SET_CSHIGH 14 /* CS unavail */
|
|
#define CMD_SPI_SET_CSLOW 15 /* CS avail */
|
|
#define CMD_SPI_MISO_ENABLE 16
|
|
#define CMD_SPI_SET_CSENABLE 17
|
|
#define CMD_SPI_SET_CSDISABLE 18
|
|
|
|
#define CMD_SPI_SET_TRIGGER_MODE 19
|
|
#define CMD_SPI_SET_TRIGGER_SENSE 20
|
|
#define CMD_SPI_SET_TRIGGER_EDGE 21
|
|
#define CMD_SPI_SET_TRIGGER_LEVEL 22
|
|
|
|
#define CMD_SPI_SET_TIME_SPS 23
|
|
#define CMD_SPI_SET_TIME_SAMPLES 24
|
|
#define CMD_SPI_GET_SYSTEMCLOCK 25
|
|
|
|
#define CMD_SPI_SET_WRITECONTINUOUS 26
|
|
#define CMD_SPI_SET_SKFS 27
|
|
|
|
#define CMD_SPI_GET_ALLCONFIG 32 /* For debug */
|
|
|
|
#define SPI_DEFAULT_BARD 0x0100
|
|
|
|
#define SPI0_IRQ_NUM IRQ_SPI
|
|
#define SPI_ERR_TRIG -1
|
|
|
|
#define BIT_CTL_ENABLE 0x4000
|
|
#define BIT_CTL_OPENDRAIN 0x2000
|
|
#define BIT_CTL_MASTER 0x1000
|
|
#define BIT_CTL_POLAR 0x0800
|
|
#define BIT_CTL_PHASE 0x0400
|
|
#define BIT_CTL_BITORDER 0x0200
|
|
#define BIT_CTL_WORDSIZE 0x0100
|
|
#define BIT_CTL_MISOENABLE 0x0020
|
|
#define BIT_CTL_RXMOD 0x0000
|
|
#define BIT_CTL_TXMOD 0x0001
|
|
#define BIT_CTL_TIMOD_DMA_TX 0x0003
|
|
#define BIT_CTL_TIMOD_DMA_RX 0x0002
|
|
#define BIT_CTL_SENDOPT 0x0004
|
|
#define BIT_CTL_TIMOD 0x0003
|
|
|
|
#define BIT_STAT_SPIF 0x0001
|
|
#define BIT_STAT_MODF 0x0002
|
|
#define BIT_STAT_TXE 0x0004
|
|
#define BIT_STAT_TXS 0x0008
|
|
#define BIT_STAT_RBSY 0x0010
|
|
#define BIT_STAT_RXS 0x0020
|
|
#define BIT_STAT_TXCOL 0x0040
|
|
#define BIT_STAT_CLR 0xFFFF
|
|
|
|
#define BIT_STU_SENDOVER 0x0001
|
|
#define BIT_STU_RECVFULL 0x0020
|
|
|
|
#define CFG_SPI_ENABLE 1
|
|
#define CFG_SPI_DISABLE 0
|
|
|
|
#define CFG_SPI_OUTENABLE 1
|
|
#define CFG_SPI_OUTDISABLE 0
|
|
|
|
#define CFG_SPI_ACTLOW 1
|
|
#define CFG_SPI_ACTHIGH 0
|
|
|
|
#define CFG_SPI_PHASESTART 1
|
|
#define CFG_SPI_PHASEMID 0
|
|
|
|
#define CFG_SPI_MASTER 1
|
|
#define CFG_SPI_SLAVE 0
|
|
|
|
#define CFG_SPI_SENELAST 0
|
|
#define CFG_SPI_SENDZERO 1
|
|
|
|
#define CFG_SPI_RCVFLUSH 1
|
|
#define CFG_SPI_RCVDISCARD 0
|
|
|
|
#define CFG_SPI_LSBFIRST 1
|
|
#define CFG_SPI_MSBFIRST 0
|
|
|
|
#define CFG_SPI_WORDSIZE16 1
|
|
#define CFG_SPI_WORDSIZE8 0
|
|
|
|
#define CFG_SPI_MISOENABLE 1
|
|
#define CFG_SPI_MISODISABLE 0
|
|
|
|
#define CFG_SPI_READ 0x00
|
|
#define CFG_SPI_WRITE 0x01
|
|
#define CFG_SPI_DMAREAD 0x02
|
|
#define CFG_SPI_DMAWRITE 0x03
|
|
|
|
#define CFG_SPI_CSCLEARALL 0
|
|
#define CFG_SPI_CHIPSEL1 1
|
|
#define CFG_SPI_CHIPSEL2 2
|
|
#define CFG_SPI_CHIPSEL3 3
|
|
#define CFG_SPI_CHIPSEL4 4
|
|
#define CFG_SPI_CHIPSEL5 5
|
|
#define CFG_SPI_CHIPSEL6 6
|
|
#define CFG_SPI_CHIPSEL7 7
|
|
|
|
#define CFG_SPI_CS1VALUE 1
|
|
#define CFG_SPI_CS2VALUE 2
|
|
#define CFG_SPI_CS3VALUE 3
|
|
#define CFG_SPI_CS4VALUE 4
|
|
#define CFG_SPI_CS5VALUE 5
|
|
#define CFG_SPI_CS6VALUE 6
|
|
#define CFG_SPI_CS7VALUE 7
|
|
|
|
/* device.platform_data for SSP controller devices */
|
|
struct bfin5xx_spi_master {
|
|
u16 num_chipselect;
|
|
u8 enable_dma;
|
|
u16 pin_req[4];
|
|
};
|
|
|
|
/* spi_board_info.controller_data for SPI slave devices,
|
|
* copied to spi_device.platform_data ... mostly for dma tuning
|
|
*/
|
|
struct bfin5xx_spi_chip {
|
|
u16 ctl_reg;
|
|
u8 enable_dma;
|
|
u8 bits_per_word;
|
|
u8 cs_change_per_word;
|
|
u16 cs_chg_udelay; /* Some devices require 16-bit delays */
|
|
};
|
|
|
|
#endif /* _SPI_CHANNEL_H_ */
|