forked from Minki/linux
fe326c5cc0
On the r7s72100 Genmai board the MTU2 driver currently triggers a common clock framework WARN_ON(enable_count) when disabling the clock due to the MTU2 driver after recent callback rework may call ->set_state_shutdown() multiple times. A similar issue was spotted for the TMU driver and fixed in:452b132
clocksource/drivers/sh_tmu: Fix traceback spotted in -next On r7s72100 Genmai v4.3-rc7 built with shmobile_defconfig spits out the following during boot: sh_mtu2 fcff0000.timer: ch0: used for clock events ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:675 clk_core_disable+0x2c/0x6c() CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc7 #1 Hardware name: Generic R7S72100 (Flattened Device Tree) Backtrace: [<c00133d4>] (dump_backtrace) from [<c0013570>] (show_stack+0x18/0x1c) [<c0013558>] (show_stack) from [<c01c7aac>] (dump_stack+0x74/0x90) [<c01c7a38>] (dump_stack) from [<c00272fc>] (warn_slowpath_common+0x88/0xb4) [<c0027274>] (warn_slowpath_common) from [<c0027400>] (warn_slowpath_null+0x24/0x2c) [<c00273dc>] (warn_slowpath_null) from [<c03a9320>] (clk_core_disable+0x2c/0x6c) [<c03a92f4>] (clk_core_disable) from [<c03aa0a0>] (clk_disable+0x40/0x4c) [<c03aa060>] (clk_disable) from [<c0395d2c>] (sh_mtu2_disable+0x24/0x50) [<c0395d08>] (sh_mtu2_disable) from [<c0395d6c>] (sh_mtu2_clock_event_shutdown+0x14/0x1c) [<c0395d58>] (sh_mtu2_clock_event_shutdown) from [<c007d7d0>] (clockevents_switch_state+0xc8/0x114) [<c007d708>] (clockevents_switch_state) from [<c007d834>] (clockevents_shutdown+0x18/0x28) [<c007d81c>] (clockevents_shutdown) from [<c007dd58>] (clockevents_exchange_device+0x70/0x78) [<c007dce8>] (clockevents_exchange_device) from [<c007e578>] (tick_check_new_device+0x88/0xe0) [<c007e4f0>] (tick_check_new_device) from [<c007daf0>] (clockevents_register_device+0xac/0x120) [<c007da44>] (clockevents_register_device) from [<c0395be8>] (sh_mtu2_probe+0x230/0x350) [<c03959b8>] (sh_mtu2_probe) from [<c028b6f0>] (platform_drv_probe+0x50/0x98) Reported-by: Chris Brandt <chris.brandt@renesas.com> Fixes:19a9ffb
("clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface") Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
529 lines
12 KiB
C
529 lines
12 KiB
C
/*
|
|
* SuperH Timer Support - MTU2
|
|
*
|
|
* Copyright (C) 2009 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_domain.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/sh_timer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
struct sh_mtu2_device;
|
|
|
|
struct sh_mtu2_channel {
|
|
struct sh_mtu2_device *mtu;
|
|
unsigned int index;
|
|
|
|
void __iomem *base;
|
|
|
|
struct clock_event_device ced;
|
|
};
|
|
|
|
struct sh_mtu2_device {
|
|
struct platform_device *pdev;
|
|
|
|
void __iomem *mapbase;
|
|
struct clk *clk;
|
|
|
|
raw_spinlock_t lock; /* Protect the shared registers */
|
|
|
|
struct sh_mtu2_channel *channels;
|
|
unsigned int num_channels;
|
|
|
|
bool has_clockevent;
|
|
};
|
|
|
|
#define TSTR -1 /* shared register */
|
|
#define TCR 0 /* channel register */
|
|
#define TMDR 1 /* channel register */
|
|
#define TIOR 2 /* channel register */
|
|
#define TIER 3 /* channel register */
|
|
#define TSR 4 /* channel register */
|
|
#define TCNT 5 /* channel register */
|
|
#define TGR 6 /* channel register */
|
|
|
|
#define TCR_CCLR_NONE (0 << 5)
|
|
#define TCR_CCLR_TGRA (1 << 5)
|
|
#define TCR_CCLR_TGRB (2 << 5)
|
|
#define TCR_CCLR_SYNC (3 << 5)
|
|
#define TCR_CCLR_TGRC (5 << 5)
|
|
#define TCR_CCLR_TGRD (6 << 5)
|
|
#define TCR_CCLR_MASK (7 << 5)
|
|
#define TCR_CKEG_RISING (0 << 3)
|
|
#define TCR_CKEG_FALLING (1 << 3)
|
|
#define TCR_CKEG_BOTH (2 << 3)
|
|
#define TCR_CKEG_MASK (3 << 3)
|
|
/* Values 4 to 7 are channel-dependent */
|
|
#define TCR_TPSC_P1 (0 << 0)
|
|
#define TCR_TPSC_P4 (1 << 0)
|
|
#define TCR_TPSC_P16 (2 << 0)
|
|
#define TCR_TPSC_P64 (3 << 0)
|
|
#define TCR_TPSC_CH0_TCLKA (4 << 0)
|
|
#define TCR_TPSC_CH0_TCLKB (5 << 0)
|
|
#define TCR_TPSC_CH0_TCLKC (6 << 0)
|
|
#define TCR_TPSC_CH0_TCLKD (7 << 0)
|
|
#define TCR_TPSC_CH1_TCLKA (4 << 0)
|
|
#define TCR_TPSC_CH1_TCLKB (5 << 0)
|
|
#define TCR_TPSC_CH1_P256 (6 << 0)
|
|
#define TCR_TPSC_CH1_TCNT2 (7 << 0)
|
|
#define TCR_TPSC_CH2_TCLKA (4 << 0)
|
|
#define TCR_TPSC_CH2_TCLKB (5 << 0)
|
|
#define TCR_TPSC_CH2_TCLKC (6 << 0)
|
|
#define TCR_TPSC_CH2_P1024 (7 << 0)
|
|
#define TCR_TPSC_CH34_P256 (4 << 0)
|
|
#define TCR_TPSC_CH34_P1024 (5 << 0)
|
|
#define TCR_TPSC_CH34_TCLKA (6 << 0)
|
|
#define TCR_TPSC_CH34_TCLKB (7 << 0)
|
|
#define TCR_TPSC_MASK (7 << 0)
|
|
|
|
#define TMDR_BFE (1 << 6)
|
|
#define TMDR_BFB (1 << 5)
|
|
#define TMDR_BFA (1 << 4)
|
|
#define TMDR_MD_NORMAL (0 << 0)
|
|
#define TMDR_MD_PWM_1 (2 << 0)
|
|
#define TMDR_MD_PWM_2 (3 << 0)
|
|
#define TMDR_MD_PHASE_1 (4 << 0)
|
|
#define TMDR_MD_PHASE_2 (5 << 0)
|
|
#define TMDR_MD_PHASE_3 (6 << 0)
|
|
#define TMDR_MD_PHASE_4 (7 << 0)
|
|
#define TMDR_MD_PWM_SYNC (8 << 0)
|
|
#define TMDR_MD_PWM_COMP_CREST (13 << 0)
|
|
#define TMDR_MD_PWM_COMP_TROUGH (14 << 0)
|
|
#define TMDR_MD_PWM_COMP_BOTH (15 << 0)
|
|
#define TMDR_MD_MASK (15 << 0)
|
|
|
|
#define TIOC_IOCH(n) ((n) << 4)
|
|
#define TIOC_IOCL(n) ((n) << 0)
|
|
#define TIOR_OC_RETAIN (0 << 0)
|
|
#define TIOR_OC_0_CLEAR (1 << 0)
|
|
#define TIOR_OC_0_SET (2 << 0)
|
|
#define TIOR_OC_0_TOGGLE (3 << 0)
|
|
#define TIOR_OC_1_CLEAR (5 << 0)
|
|
#define TIOR_OC_1_SET (6 << 0)
|
|
#define TIOR_OC_1_TOGGLE (7 << 0)
|
|
#define TIOR_IC_RISING (8 << 0)
|
|
#define TIOR_IC_FALLING (9 << 0)
|
|
#define TIOR_IC_BOTH (10 << 0)
|
|
#define TIOR_IC_TCNT (12 << 0)
|
|
#define TIOR_MASK (15 << 0)
|
|
|
|
#define TIER_TTGE (1 << 7)
|
|
#define TIER_TTGE2 (1 << 6)
|
|
#define TIER_TCIEU (1 << 5)
|
|
#define TIER_TCIEV (1 << 4)
|
|
#define TIER_TGIED (1 << 3)
|
|
#define TIER_TGIEC (1 << 2)
|
|
#define TIER_TGIEB (1 << 1)
|
|
#define TIER_TGIEA (1 << 0)
|
|
|
|
#define TSR_TCFD (1 << 7)
|
|
#define TSR_TCFU (1 << 5)
|
|
#define TSR_TCFV (1 << 4)
|
|
#define TSR_TGFD (1 << 3)
|
|
#define TSR_TGFC (1 << 2)
|
|
#define TSR_TGFB (1 << 1)
|
|
#define TSR_TGFA (1 << 0)
|
|
|
|
static unsigned long mtu2_reg_offs[] = {
|
|
[TCR] = 0,
|
|
[TMDR] = 1,
|
|
[TIOR] = 2,
|
|
[TIER] = 4,
|
|
[TSR] = 5,
|
|
[TCNT] = 6,
|
|
[TGR] = 8,
|
|
};
|
|
|
|
static inline unsigned long sh_mtu2_read(struct sh_mtu2_channel *ch, int reg_nr)
|
|
{
|
|
unsigned long offs;
|
|
|
|
if (reg_nr == TSTR)
|
|
return ioread8(ch->mtu->mapbase + 0x280);
|
|
|
|
offs = mtu2_reg_offs[reg_nr];
|
|
|
|
if ((reg_nr == TCNT) || (reg_nr == TGR))
|
|
return ioread16(ch->base + offs);
|
|
else
|
|
return ioread8(ch->base + offs);
|
|
}
|
|
|
|
static inline void sh_mtu2_write(struct sh_mtu2_channel *ch, int reg_nr,
|
|
unsigned long value)
|
|
{
|
|
unsigned long offs;
|
|
|
|
if (reg_nr == TSTR)
|
|
return iowrite8(value, ch->mtu->mapbase + 0x280);
|
|
|
|
offs = mtu2_reg_offs[reg_nr];
|
|
|
|
if ((reg_nr == TCNT) || (reg_nr == TGR))
|
|
iowrite16(value, ch->base + offs);
|
|
else
|
|
iowrite8(value, ch->base + offs);
|
|
}
|
|
|
|
static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
|
|
{
|
|
unsigned long flags, value;
|
|
|
|
/* start stop register shared by multiple timer channels */
|
|
raw_spin_lock_irqsave(&ch->mtu->lock, flags);
|
|
value = sh_mtu2_read(ch, TSTR);
|
|
|
|
if (start)
|
|
value |= 1 << ch->index;
|
|
else
|
|
value &= ~(1 << ch->index);
|
|
|
|
sh_mtu2_write(ch, TSTR, value);
|
|
raw_spin_unlock_irqrestore(&ch->mtu->lock, flags);
|
|
}
|
|
|
|
static int sh_mtu2_enable(struct sh_mtu2_channel *ch)
|
|
{
|
|
unsigned long periodic;
|
|
unsigned long rate;
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(&ch->mtu->pdev->dev);
|
|
dev_pm_syscore_device(&ch->mtu->pdev->dev, true);
|
|
|
|
/* enable clock */
|
|
ret = clk_enable(ch->mtu->clk);
|
|
if (ret) {
|
|
dev_err(&ch->mtu->pdev->dev, "ch%u: cannot enable clock\n",
|
|
ch->index);
|
|
return ret;
|
|
}
|
|
|
|
/* make sure channel is disabled */
|
|
sh_mtu2_start_stop_ch(ch, 0);
|
|
|
|
rate = clk_get_rate(ch->mtu->clk) / 64;
|
|
periodic = (rate + HZ/2) / HZ;
|
|
|
|
/*
|
|
* "Periodic Counter Operation"
|
|
* Clear on TGRA compare match, divide clock by 64.
|
|
*/
|
|
sh_mtu2_write(ch, TCR, TCR_CCLR_TGRA | TCR_TPSC_P64);
|
|
sh_mtu2_write(ch, TIOR, TIOC_IOCH(TIOR_OC_0_CLEAR) |
|
|
TIOC_IOCL(TIOR_OC_0_CLEAR));
|
|
sh_mtu2_write(ch, TGR, periodic);
|
|
sh_mtu2_write(ch, TCNT, 0);
|
|
sh_mtu2_write(ch, TMDR, TMDR_MD_NORMAL);
|
|
sh_mtu2_write(ch, TIER, TIER_TGIEA);
|
|
|
|
/* enable channel */
|
|
sh_mtu2_start_stop_ch(ch, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sh_mtu2_disable(struct sh_mtu2_channel *ch)
|
|
{
|
|
/* disable channel */
|
|
sh_mtu2_start_stop_ch(ch, 0);
|
|
|
|
/* stop clock */
|
|
clk_disable(ch->mtu->clk);
|
|
|
|
dev_pm_syscore_device(&ch->mtu->pdev->dev, false);
|
|
pm_runtime_put(&ch->mtu->pdev->dev);
|
|
}
|
|
|
|
static irqreturn_t sh_mtu2_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct sh_mtu2_channel *ch = dev_id;
|
|
|
|
/* acknowledge interrupt */
|
|
sh_mtu2_read(ch, TSR);
|
|
sh_mtu2_write(ch, TSR, ~TSR_TGFA);
|
|
|
|
/* notify clockevent layer */
|
|
ch->ced.event_handler(&ch->ced);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct sh_mtu2_channel *ced_to_sh_mtu2(struct clock_event_device *ced)
|
|
{
|
|
return container_of(ced, struct sh_mtu2_channel, ced);
|
|
}
|
|
|
|
static int sh_mtu2_clock_event_shutdown(struct clock_event_device *ced)
|
|
{
|
|
struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
|
|
|
|
if (clockevent_state_periodic(ced))
|
|
sh_mtu2_disable(ch);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mtu2_clock_event_set_periodic(struct clock_event_device *ced)
|
|
{
|
|
struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
|
|
|
|
if (clockevent_state_periodic(ced))
|
|
sh_mtu2_disable(ch);
|
|
|
|
dev_info(&ch->mtu->pdev->dev, "ch%u: used for periodic clock events\n",
|
|
ch->index);
|
|
sh_mtu2_enable(ch);
|
|
return 0;
|
|
}
|
|
|
|
static void sh_mtu2_clock_event_suspend(struct clock_event_device *ced)
|
|
{
|
|
pm_genpd_syscore_poweroff(&ced_to_sh_mtu2(ced)->mtu->pdev->dev);
|
|
}
|
|
|
|
static void sh_mtu2_clock_event_resume(struct clock_event_device *ced)
|
|
{
|
|
pm_genpd_syscore_poweron(&ced_to_sh_mtu2(ced)->mtu->pdev->dev);
|
|
}
|
|
|
|
static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch,
|
|
const char *name)
|
|
{
|
|
struct clock_event_device *ced = &ch->ced;
|
|
|
|
ced->name = name;
|
|
ced->features = CLOCK_EVT_FEAT_PERIODIC;
|
|
ced->rating = 200;
|
|
ced->cpumask = cpu_possible_mask;
|
|
ced->set_state_shutdown = sh_mtu2_clock_event_shutdown;
|
|
ced->set_state_periodic = sh_mtu2_clock_event_set_periodic;
|
|
ced->suspend = sh_mtu2_clock_event_suspend;
|
|
ced->resume = sh_mtu2_clock_event_resume;
|
|
|
|
dev_info(&ch->mtu->pdev->dev, "ch%u: used for clock events\n",
|
|
ch->index);
|
|
clockevents_register_device(ced);
|
|
}
|
|
|
|
static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name)
|
|
{
|
|
ch->mtu->has_clockevent = true;
|
|
sh_mtu2_register_clockevent(ch, name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch, unsigned int index,
|
|
struct sh_mtu2_device *mtu)
|
|
{
|
|
static const unsigned int channel_offsets[] = {
|
|
0x300, 0x380, 0x000,
|
|
};
|
|
char name[6];
|
|
int irq;
|
|
int ret;
|
|
|
|
ch->mtu = mtu;
|
|
|
|
sprintf(name, "tgi%ua", index);
|
|
irq = platform_get_irq_byname(mtu->pdev, name);
|
|
if (irq < 0) {
|
|
/* Skip channels with no declared interrupt. */
|
|
return 0;
|
|
}
|
|
|
|
ret = request_irq(irq, sh_mtu2_interrupt,
|
|
IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
|
|
dev_name(&ch->mtu->pdev->dev), ch);
|
|
if (ret) {
|
|
dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n",
|
|
index, irq);
|
|
return ret;
|
|
}
|
|
|
|
ch->base = mtu->mapbase + channel_offsets[index];
|
|
ch->index = index;
|
|
|
|
return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev));
|
|
}
|
|
|
|
static int sh_mtu2_map_memory(struct sh_mtu2_device *mtu)
|
|
{
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(mtu->pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&mtu->pdev->dev, "failed to get I/O memory\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
mtu->mapbase = ioremap_nocache(res->start, resource_size(res));
|
|
if (mtu->mapbase == NULL)
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
|
|
struct platform_device *pdev)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
mtu->pdev = pdev;
|
|
|
|
raw_spin_lock_init(&mtu->lock);
|
|
|
|
/* Get hold of clock. */
|
|
mtu->clk = clk_get(&mtu->pdev->dev, "fck");
|
|
if (IS_ERR(mtu->clk)) {
|
|
dev_err(&mtu->pdev->dev, "cannot get clock\n");
|
|
return PTR_ERR(mtu->clk);
|
|
}
|
|
|
|
ret = clk_prepare(mtu->clk);
|
|
if (ret < 0)
|
|
goto err_clk_put;
|
|
|
|
/* Map the memory resource. */
|
|
ret = sh_mtu2_map_memory(mtu);
|
|
if (ret < 0) {
|
|
dev_err(&mtu->pdev->dev, "failed to remap I/O memory\n");
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
/* Allocate and setup the channels. */
|
|
mtu->num_channels = 3;
|
|
|
|
mtu->channels = kzalloc(sizeof(*mtu->channels) * mtu->num_channels,
|
|
GFP_KERNEL);
|
|
if (mtu->channels == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err_unmap;
|
|
}
|
|
|
|
for (i = 0; i < mtu->num_channels; ++i) {
|
|
ret = sh_mtu2_setup_channel(&mtu->channels[i], i, mtu);
|
|
if (ret < 0)
|
|
goto err_unmap;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mtu);
|
|
|
|
return 0;
|
|
|
|
err_unmap:
|
|
kfree(mtu->channels);
|
|
iounmap(mtu->mapbase);
|
|
err_clk_unprepare:
|
|
clk_unprepare(mtu->clk);
|
|
err_clk_put:
|
|
clk_put(mtu->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mtu2_probe(struct platform_device *pdev)
|
|
{
|
|
struct sh_mtu2_device *mtu = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
if (!is_early_platform_device(pdev)) {
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
}
|
|
|
|
if (mtu) {
|
|
dev_info(&pdev->dev, "kept as earlytimer\n");
|
|
goto out;
|
|
}
|
|
|
|
mtu = kzalloc(sizeof(*mtu), GFP_KERNEL);
|
|
if (mtu == NULL)
|
|
return -ENOMEM;
|
|
|
|
ret = sh_mtu2_setup(mtu, pdev);
|
|
if (ret) {
|
|
kfree(mtu);
|
|
pm_runtime_idle(&pdev->dev);
|
|
return ret;
|
|
}
|
|
if (is_early_platform_device(pdev))
|
|
return 0;
|
|
|
|
out:
|
|
if (mtu->has_clockevent)
|
|
pm_runtime_irq_safe(&pdev->dev);
|
|
else
|
|
pm_runtime_idle(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mtu2_remove(struct platform_device *pdev)
|
|
{
|
|
return -EBUSY; /* cannot unregister clockevent */
|
|
}
|
|
|
|
static const struct platform_device_id sh_mtu2_id_table[] = {
|
|
{ "sh-mtu2", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, sh_mtu2_id_table);
|
|
|
|
static const struct of_device_id sh_mtu2_of_table[] __maybe_unused = {
|
|
{ .compatible = "renesas,mtu2" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sh_mtu2_of_table);
|
|
|
|
static struct platform_driver sh_mtu2_device_driver = {
|
|
.probe = sh_mtu2_probe,
|
|
.remove = sh_mtu2_remove,
|
|
.driver = {
|
|
.name = "sh_mtu2",
|
|
.of_match_table = of_match_ptr(sh_mtu2_of_table),
|
|
},
|
|
.id_table = sh_mtu2_id_table,
|
|
};
|
|
|
|
static int __init sh_mtu2_init(void)
|
|
{
|
|
return platform_driver_register(&sh_mtu2_device_driver);
|
|
}
|
|
|
|
static void __exit sh_mtu2_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh_mtu2_device_driver);
|
|
}
|
|
|
|
early_platform_init("earlytimer", &sh_mtu2_device_driver);
|
|
subsys_initcall(sh_mtu2_init);
|
|
module_exit(sh_mtu2_exit);
|
|
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
MODULE_DESCRIPTION("SuperH MTU2 Timer Driver");
|
|
MODULE_LICENSE("GPL v2");
|