linux/drivers/bluetooth/btusb.c
David S. Miller aa2eaa8c27 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor overlapping changes in the btusb and ixgbe drivers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 14:17:27 +02:00

4135 lines
105 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
*
* Generic Bluetooth USB driver
*
* Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
*/
#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include <linux/firmware.h>
#include <linux/iopoll.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/suspend.h>
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btintel.h"
#include "btbcm.h"
#include "btrtl.h"
#define VERSION "0.8"
static bool disable_scofix;
static bool force_scofix;
static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
static bool reset = true;
static struct usb_driver btusb_driver;
#define BTUSB_IGNORE 0x01
#define BTUSB_DIGIANSWER 0x02
#define BTUSB_CSR 0x04
#define BTUSB_SNIFFER 0x08
#define BTUSB_BCM92035 0x10
#define BTUSB_BROKEN_ISOC 0x20
#define BTUSB_WRONG_SCO_MTU 0x40
#define BTUSB_ATH3012 0x80
#define BTUSB_INTEL 0x100
#define BTUSB_INTEL_BOOT 0x200
#define BTUSB_BCM_PATCHRAM 0x400
#define BTUSB_MARVELL 0x800
#define BTUSB_SWAVE 0x1000
#define BTUSB_INTEL_NEW 0x2000
#define BTUSB_AMP 0x4000
#define BTUSB_QCA_ROME 0x8000
#define BTUSB_BCM_APPLE 0x10000
#define BTUSB_REALTEK 0x20000
#define BTUSB_BCM2045 0x40000
#define BTUSB_IFNUM_2 0x80000
#define BTUSB_CW6622 0x100000
#define BTUSB_MEDIATEK 0x200000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
/* Generic Bluetooth AMP device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
/* Generic Bluetooth USB interface */
{ USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
/* Apple-specific (Broadcom) devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
/* MediaTek MT76x0E */
{ USB_DEVICE(0x0e8d, 0x763f) },
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
/* Apple MacBookPro 7,1 */
{ USB_DEVICE(0x05ac, 0x8213) },
/* Apple iMac11,1 */
{ USB_DEVICE(0x05ac, 0x8215) },
/* Apple MacBookPro6,2 */
{ USB_DEVICE(0x05ac, 0x8218) },
/* Apple MacBookAir3,1, MacBookAir3,2 */
{ USB_DEVICE(0x05ac, 0x821b) },
/* Apple MacBookAir4,1 */
{ USB_DEVICE(0x05ac, 0x821f) },
/* Apple MacBookPro8,2 */
{ USB_DEVICE(0x05ac, 0x821a) },
/* Apple MacMini5,1 */
{ USB_DEVICE(0x05ac, 0x8281) },
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
/* Bluetooth Ultraport Module from IBM */
{ USB_DEVICE(0x04bf, 0x030a) },
/* ALPS Modules with non-standard id */
{ USB_DEVICE(0x044e, 0x3001) },
{ USB_DEVICE(0x044e, 0x3002) },
/* Ericsson with non-standard id */
{ USB_DEVICE(0x0bdb, 0x1002) },
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x413c, 0x8197) },
/* Broadcom BCM20702B0 (Dynex/Insignia) */
{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom BCM43142A0 (Foxconn/Lenovo) */
{ USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom BCM920703 (HTC Vive) */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Foxconn - Hon Hai */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Lite-On Technology - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom devices with vendor specific id */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* ASUSTek Computer - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Belkin F8065bf - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* IMC Networks - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Dell Computer - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Toshiba Corp - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Intel Bluetooth USB Bootloader (RAM module) */
{ USB_DEVICE(0x8087, 0x0a5a),
.driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, btusb_table);
static const struct usb_device_id blacklist_table[] = {
/* CSR BlueCore devices */
{ USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
/* Broadcom BCM2033 without firmware */
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
/* Broadcom BCM2045 devices */
{ USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
/* QCA ROME chipset */
{ USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Broadcom BCM2045 */
{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
/* HP laptop with Broadcom chip */
{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell laptop with Broadcom chip */
{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell Wireless 370 and 410 devices */
{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Belkin F8T012 and F8T013 devices */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Asus WL-BTD202 device */
{ USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
/* RTX Telecom based adapters with buggy SCO support */
{ USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
{ USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
/* CONWISE Technology based adapters with buggy SCO support */
{ USB_DEVICE(0x0e5e, 0x6622),
.driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622},
/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
{ USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
/* CSR BlueCore Bluetooth Sniffer */
{ USB_DEVICE(0x0a12, 0x0002),
.driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
/* Frontline ComProbe Bluetooth Sniffer */
{ USB_DEVICE(0x16d3, 0x0002),
.driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
/* Marvell Bluetooth devices */
{ USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
{ USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
{ USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
/* Intel Bluetooth devices */
{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW },
{ USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW },
{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW },
/* Other Intel Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_IGNORE },
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_REALTEK },
/* MediaTek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_MEDIATEK },
/* Additional Realtek 8723AE Bluetooth devices */
{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8723BE Bluetooth devices */
{ USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8723BU Bluetooth devices */
{ USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8723DE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8821AE Bluetooth devices */
{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8822BE Bluetooth devices */
{ USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK },
/* Silicon Wave based devices */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
{ } /* Terminating entry */
};
/* The Bluetooth USB module build into some devices needs to be reset on resume,
* this is a problem with the platform (likely shutting off all power) not with
* the module itself. So we use a DMI list to match known broken platforms.
*/
static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
{
/* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"),
},
},
{
/* Dell XPS 9360 (QCA ROME device 0cf3:e300) */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"),
},
},
{
/* Dell Inspiron 5565 (QCA ROME device 0cf3:e009) */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5565"),
},
},
{}
};
#define BTUSB_MAX_ISOC_FRAMES 10
#define BTUSB_INTR_RUNNING 0
#define BTUSB_BULK_RUNNING 1
#define BTUSB_ISOC_RUNNING 2
#define BTUSB_SUSPENDING 3
#define BTUSB_DID_ISO_RESUME 4
#define BTUSB_BOOTLOADER 5
#define BTUSB_DOWNLOADING 6
#define BTUSB_FIRMWARE_LOADED 7
#define BTUSB_FIRMWARE_FAILED 8
#define BTUSB_BOOTING 9
#define BTUSB_DIAG_RUNNING 10
#define BTUSB_OOB_WAKE_ENABLED 11
#define BTUSB_HW_RESET_ACTIVE 12
#define BTUSB_TX_WAIT_VND_EVT 13
#define BTUSB_WAKEUP_DISABLE 14
struct btusb_data {
struct hci_dev *hdev;
struct usb_device *udev;
struct usb_interface *intf;
struct usb_interface *isoc;
struct usb_interface *diag;
unsigned isoc_ifnum;
unsigned long flags;
struct work_struct work;
struct work_struct waker;
struct usb_anchor deferred;
struct usb_anchor tx_anchor;
int tx_in_flight;
spinlock_t txlock;
struct usb_anchor intr_anchor;
struct usb_anchor bulk_anchor;
struct usb_anchor isoc_anchor;
struct usb_anchor diag_anchor;
struct usb_anchor ctrl_anchor;
spinlock_t rxlock;
struct sk_buff *evt_skb;
struct sk_buff *acl_skb;
struct sk_buff *sco_skb;
struct usb_endpoint_descriptor *intr_ep;
struct usb_endpoint_descriptor *bulk_tx_ep;
struct usb_endpoint_descriptor *bulk_rx_ep;
struct usb_endpoint_descriptor *isoc_tx_ep;
struct usb_endpoint_descriptor *isoc_rx_ep;
struct usb_endpoint_descriptor *diag_tx_ep;
struct usb_endpoint_descriptor *diag_rx_ep;
struct gpio_desc *reset_gpio;
__u8 cmdreq_type;
__u8 cmdreq;
unsigned int sco_num;
int isoc_altsetting;
int suspend_count;
int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
int (*setup_on_usb)(struct hci_dev *hdev);
int oob_wake_irq; /* irq for out-of-band wake-on-bt */
unsigned cmd_timeout_cnt;
};
static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct gpio_desc *reset_gpio = data->reset_gpio;
if (++data->cmd_timeout_cnt < 5)
return;
if (!reset_gpio) {
bt_dev_err(hdev, "No way to reset. Ignoring and continuing");
return;
}
/*
* Toggle the hard reset line if the platform provides one. The reset
* is going to yank the device off the USB and then replug. So doing
* once is enough. The cleanup is handled correctly on the way out
* (standard USB disconnect), and the new device is detected cleanly
* and bound to the driver again like it should be.
*/
if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
bt_dev_err(hdev, "last reset failed? Not resetting again");
return;
}
bt_dev_err(hdev, "Initiating HW reset via gpio");
gpiod_set_value_cansleep(reset_gpio, 1);
msleep(100);
gpiod_set_value_cansleep(reset_gpio, 0);
}
static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct gpio_desc *reset_gpio = data->reset_gpio;
if (++data->cmd_timeout_cnt < 5)
return;
if (!reset_gpio) {
bt_dev_err(hdev, "No gpio to reset Realtek device, ignoring");
return;
}
/* Toggle the hard reset line. The Realtek device is going to
* yank itself off the USB and then replug. The cleanup is handled
* correctly on the way out (standard USB disconnect), and the new
* device is detected cleanly and bound to the driver again like
* it should be.
*/
if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
bt_dev_err(hdev, "last reset failed? Not resetting again");
return;
}
bt_dev_err(hdev, "Reset Realtek device via gpio");
gpiod_set_value_cansleep(reset_gpio, 0);
msleep(200);
gpiod_set_value_cansleep(reset_gpio, 1);
}
static inline void btusb_free_frags(struct btusb_data *data)
{
unsigned long flags;
spin_lock_irqsave(&data->rxlock, flags);
kfree_skb(data->evt_skb);
data->evt_skb = NULL;
kfree_skb(data->acl_skb);
data->acl_skb = NULL;
kfree_skb(data->sco_skb);
data->sco_skb = NULL;
spin_unlock_irqrestore(&data->rxlock, flags);
}
static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
unsigned long flags;
int err = 0;
spin_lock_irqsave(&data->rxlock, flags);
skb = data->evt_skb;
while (count) {
int len;
if (!skb) {
skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
break;
}
hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
}
len = min_t(uint, hci_skb_expect(skb), count);
skb_put_data(skb, buffer, len);
count -= len;
buffer += len;
hci_skb_expect(skb) -= len;
if (skb->len == HCI_EVENT_HDR_SIZE) {
/* Complete event header */
hci_skb_expect(skb) = hci_event_hdr(skb)->plen;
if (skb_tailroom(skb) < hci_skb_expect(skb)) {
kfree_skb(skb);
skb = NULL;
err = -EILSEQ;
break;
}
}
if (!hci_skb_expect(skb)) {
/* Complete frame */
data->recv_event(data->hdev, skb);
skb = NULL;
}
}
data->evt_skb = skb;
spin_unlock_irqrestore(&data->rxlock, flags);
return err;
}
static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
unsigned long flags;
int err = 0;
spin_lock_irqsave(&data->rxlock, flags);
skb = data->acl_skb;
while (count) {
int len;
if (!skb) {
skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
break;
}
hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
}
len = min_t(uint, hci_skb_expect(skb), count);
skb_put_data(skb, buffer, len);
count -= len;
buffer += len;
hci_skb_expect(skb) -= len;
if (skb->len == HCI_ACL_HDR_SIZE) {
__le16 dlen = hci_acl_hdr(skb)->dlen;
/* Complete ACL header */
hci_skb_expect(skb) = __le16_to_cpu(dlen);
if (skb_tailroom(skb) < hci_skb_expect(skb)) {
kfree_skb(skb);
skb = NULL;
err = -EILSEQ;
break;
}
}
if (!hci_skb_expect(skb)) {
/* Complete frame */
hci_recv_frame(data->hdev, skb);
skb = NULL;
}
}
data->acl_skb = skb;
spin_unlock_irqrestore(&data->rxlock, flags);
return err;
}
static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
unsigned long flags;
int err = 0;
spin_lock_irqsave(&data->rxlock, flags);
skb = data->sco_skb;
while (count) {
int len;
if (!skb) {
skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
break;
}
hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
}
len = min_t(uint, hci_skb_expect(skb), count);
skb_put_data(skb, buffer, len);
count -= len;
buffer += len;
hci_skb_expect(skb) -= len;
if (skb->len == HCI_SCO_HDR_SIZE) {
/* Complete SCO header */
hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen;
if (skb_tailroom(skb) < hci_skb_expect(skb)) {
kfree_skb(skb);
skb = NULL;
err = -EILSEQ;
break;
}
}
if (!hci_skb_expect(skb)) {
/* Complete frame */
hci_recv_frame(data->hdev, skb);
skb = NULL;
}
}
data->sco_skb = skb;
spin_unlock_irqrestore(&data->rxlock, flags);
return err;
}
static void btusb_intr_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
hdev->stat.byte_rx += urb->actual_length;
if (btusb_recv_intr(data, urb->transfer_buffer,
urb->actual_length) < 0) {
bt_dev_err(hdev, "corrupted event packet");
hdev->stat.err_rx++;
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
return;
usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->intr_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected
*/
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
}
static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size;
BT_DBG("%s", hdev->name);
if (!data->intr_ep)
return -ENODEV;
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe, buf, size,
btusb_intr_complete, hdev, data->intr_ep->bInterval);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_anchor_urb(urb, &data->intr_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p submission failed (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_bulk_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
hdev->stat.byte_rx += urb->actual_length;
if (data->recv_bulk(data, urb->transfer_buffer,
urb->actual_length) < 0) {
bt_dev_err(hdev, "corrupted ACL packet");
hdev->stat.err_rx++;
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
return;
usb_anchor_urb(urb, &data->bulk_anchor);
usb_mark_last_busy(data->udev);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected
*/
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
}
static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size = HCI_MAX_FRAME_SIZE;
BT_DBG("%s", hdev->name);
if (!data->bulk_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
btusb_bulk_complete, hdev);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->bulk_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p submission failed (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_isoc_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int i, err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int offset = urb->iso_frame_desc[i].offset;
unsigned int length = urb->iso_frame_desc[i].actual_length;
if (urb->iso_frame_desc[i].status)
continue;
hdev->stat.byte_rx += length;
if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
length) < 0) {
bt_dev_err(hdev, "corrupted SCO packet");
hdev->stat.err_rx++;
}
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
return;
usb_anchor_urb(urb, &data->isoc_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected
*/
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
}
static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
{
int i, offset = 0;
BT_DBG("len %d mtu %d", len, mtu);
for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
i++, offset += mtu, len -= mtu) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = mtu;
}
if (len && i < BTUSB_MAX_ISOC_FRAMES) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = len;
i++;
}
urb->number_of_packets = i;
}
static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size;
BT_DBG("%s", hdev->name);
if (!data->isoc_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
BTUSB_MAX_ISOC_FRAMES;
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
hdev, data->isoc_rx_ep->bInterval);
urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
__fill_isoc_descriptor(urb, size,
le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
usb_anchor_urb(urb, &data->isoc_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p submission failed (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_diag_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (urb->status == 0) {
struct sk_buff *skb;
skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
if (skb) {
skb_put_data(skb, urb->transfer_buffer,
urb->actual_length);
hci_recv_diag(hdev, skb);
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
return;
usb_anchor_urb(urb, &data->diag_anchor);
usb_mark_last_busy(data->udev);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected
*/
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
}
static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size = HCI_MAX_FRAME_SIZE;
BT_DBG("%s", hdev->name);
if (!data->diag_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
btusb_diag_complete, hdev);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->diag_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p submission failed (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
struct btusb_data *data = hci_get_drvdata(hdev);
unsigned long flags;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (!urb->status)
hdev->stat.byte_tx += urb->transfer_buffer_length;
else
hdev->stat.err_tx++;
done:
spin_lock_irqsave(&data->txlock, flags);
data->tx_in_flight--;
spin_unlock_irqrestore(&data->txlock, flags);
kfree(urb->setup_packet);
kfree_skb(skb);
}
static void btusb_isoc_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (!urb->status)
hdev->stat.byte_tx += urb->transfer_buffer_length;
else
hdev->stat.err_tx++;
done:
kfree(urb->setup_packet);
kfree_skb(skb);
}
static int btusb_open(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s", hdev->name);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
return err;
/* Patching USB firmware files prior to starting any URBs of HCI path
* It is more safe to use USB bulk channel for downloading USB patch
*/
if (data->setup_on_usb) {
err = data->setup_on_usb(hdev);
if (err < 0)
return err;
}
data->intf->needs_remote_wakeup = 1;
/* Disable device remote wakeup when host is suspended
* For Realtek chips, global suspend without
* SET_FEATURE (DEVICE_REMOTE_WAKEUP) can save more power in device.
*/
if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
device_wakeup_disable(&data->udev->dev);
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
goto done;
err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
if (err < 0)
goto failed;
err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
if (err < 0) {
usb_kill_anchored_urbs(&data->intr_anchor);
goto failed;
}
set_bit(BTUSB_BULK_RUNNING, &data->flags);
btusb_submit_bulk_urb(hdev, GFP_KERNEL);
if (data->diag) {
if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
set_bit(BTUSB_DIAG_RUNNING, &data->flags);
}
done:
usb_autopm_put_interface(data->intf);
return 0;
failed:
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
usb_autopm_put_interface(data->intf);
return err;
}
static void btusb_stop_traffic(struct btusb_data *data)
{
usb_kill_anchored_urbs(&data->intr_anchor);
usb_kill_anchored_urbs(&data->bulk_anchor);
usb_kill_anchored_urbs(&data->isoc_anchor);
usb_kill_anchored_urbs(&data->diag_anchor);
usb_kill_anchored_urbs(&data->ctrl_anchor);
}
static int btusb_close(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s", hdev->name);
cancel_work_sync(&data->work);
cancel_work_sync(&data->waker);
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
btusb_stop_traffic(data);
btusb_free_frags(data);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
goto failed;
data->intf->needs_remote_wakeup = 0;
/* Enable remote wake up for auto-suspend */
if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
data->intf->needs_remote_wakeup = 1;
usb_autopm_put_interface(data->intf);
failed:
usb_scuttle_anchored_urbs(&data->deferred);
return 0;
}
static int btusb_flush(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
BT_DBG("%s", hdev->name);
usb_kill_anchored_urbs(&data->tx_anchor);
btusb_free_frags(data);
return 0;
}
static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
struct urb *urb;
unsigned int pipe;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
dr = kmalloc(sizeof(*dr), GFP_KERNEL);
if (!dr) {
usb_free_urb(urb);
return ERR_PTR(-ENOMEM);
}
dr->bRequestType = data->cmdreq_type;
dr->bRequest = data->cmdreq;
dr->wIndex = 0;
dr->wValue = 0;
dr->wLength = __cpu_to_le16(skb->len);
pipe = usb_sndctrlpipe(data->udev, 0x00);
usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
skb->data, skb->len, btusb_tx_complete, skb);
skb->dev = (void *)hdev;
return urb;
}
static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned int pipe;
if (!data->bulk_tx_ep)
return ERR_PTR(-ENODEV);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
skb->dev = (void *)hdev;
return urb;
}
static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned int pipe;
if (!data->isoc_tx_ep)
return ERR_PTR(-ENODEV);
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_isoc_tx_complete,
skb, data->isoc_tx_ep->bInterval);
urb->transfer_flags = URB_ISO_ASAP;
__fill_isoc_descriptor(urb, skb->len,
le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
skb->dev = (void *)hdev;
return urb;
}
static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p submission failed (%d)",
urb, -err);
kfree(urb->setup_packet);
usb_unanchor_urb(urb);
} else {
usb_mark_last_busy(data->udev);
}
usb_free_urb(urb);
return err;
}
static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
unsigned long flags;
bool suspending;
spin_lock_irqsave(&data->txlock, flags);
suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
if (!suspending)
data->tx_in_flight++;
spin_unlock_irqrestore(&data->txlock, flags);
if (!suspending)
return submit_tx_urb(hdev, urb);
usb_anchor_urb(urb, &data->deferred);
schedule_work(&data->waker);
usb_free_urb(urb);
return 0;
}
static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
struct urb *urb;
BT_DBG("%s", hdev->name);
switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
urb = alloc_ctrl_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.cmd_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_ACLDATA_PKT:
urb = alloc_bulk_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.acl_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_SCODATA_PKT:
if (hci_conn_num(hdev, SCO_LINK) < 1)
return -ENODEV;
urb = alloc_isoc_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.sco_tx++;
return submit_tx_urb(hdev, urb);
}
return -EILSEQ;
}
static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
{
struct btusb_data *data = hci_get_drvdata(hdev);
BT_DBG("%s evt %d", hdev->name, evt);
if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
data->sco_num = hci_conn_num(hdev, SCO_LINK);
schedule_work(&data->work);
}
}
static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_interface *intf = data->isoc;
struct usb_endpoint_descriptor *ep_desc;
int i, err;
if (!data->isoc)
return -ENODEV;
err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting);
if (err < 0) {
bt_dev_err(hdev, "setting interface failed (%d)", -err);
return err;
}
data->isoc_altsetting = altsetting;
data->isoc_tx_ep = NULL;
data->isoc_rx_ep = NULL;
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
data->isoc_tx_ep = ep_desc;
continue;
}
if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
data->isoc_rx_ep = ep_desc;
continue;
}
}
if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
bt_dev_err(hdev, "invalid SCO descriptors");
return -ENODEV;
}
return 0;
}
static void btusb_work(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, work);
struct hci_dev *hdev = data->hdev;
int new_alts;
int err;
if (data->sco_num > 0) {
if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
if (err < 0) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
return;
}
set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
}
if (hdev->voice_setting & 0x0020) {
static const int alts[3] = { 2, 4, 5 };
new_alts = alts[data->sco_num - 1];
} else {
new_alts = data->sco_num;
}
if (data->isoc_altsetting != new_alts) {
unsigned long flags;
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
/* When isochronous alternate setting needs to be
* changed, because SCO connection has been added
* or removed, a packet fragment may be left in the
* reassembling state. This could lead to wrongly
* assembled fragments.
*
* Clear outstanding fragment when selecting a new
* alternate setting.
*/
spin_lock_irqsave(&data->rxlock, flags);
kfree_skb(data->sco_skb);
data->sco_skb = NULL;
spin_unlock_irqrestore(&data->rxlock, flags);
if (__set_isoc_interface(hdev, new_alts) < 0)
return;
}
if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
else
btusb_submit_isoc_urb(hdev, GFP_KERNEL);
}
} else {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
__set_isoc_interface(hdev, 0);
if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
}
}
static void btusb_waker(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, waker);
int err;
err = usb_autopm_get_interface(data->intf);
if (err < 0)
return;
usb_autopm_put_interface(data->intf);
}
static int btusb_setup_bcm92035(struct hci_dev *hdev)
{
struct sk_buff *skb;
u8 val = 0x00;
BT_DBG("%s", hdev->name);
skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb));
else
kfree_skb(skb);
return 0;
}
static int btusb_setup_csr(struct hci_dev *hdev)
{
struct hci_rp_read_local_version *rp;
struct sk_buff *skb;
BT_DBG("%s", hdev->name);
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
int err = PTR_ERR(skb);
bt_dev_err(hdev, "CSR: Local version failed (%d)", err);
return err;
}
if (skb->len != sizeof(struct hci_rp_read_local_version)) {
bt_dev_err(hdev, "CSR: Local version length mismatch");
kfree_skb(skb);
return -EIO;
}
rp = (struct hci_rp_read_local_version *)skb->data;
/* Detect controllers which aren't real CSR ones. */
if (le16_to_cpu(rp->manufacturer) != 10 ||
le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
/* Clear the reset quirk since this is not an actual
* early Bluetooth 1.1 device from CSR.
*/
clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
/* These fake CSR controllers have all a broken
* stored link key handling and so just disable it.
*/
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
}
kfree_skb(skb);
return 0;
}
static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
struct intel_version *ver)
{
const struct firmware *fw;
char fwname[64];
int ret;
snprintf(fwname, sizeof(fwname),
"intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
ver->hw_platform, ver->hw_variant, ver->hw_revision,
ver->fw_variant, ver->fw_revision, ver->fw_build_num,
ver->fw_build_ww, ver->fw_build_yy);
ret = request_firmware(&fw, fwname, &hdev->dev);
if (ret < 0) {
if (ret == -EINVAL) {
bt_dev_err(hdev, "Intel firmware file request failed (%d)",
ret);
return NULL;
}
bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
fwname, ret);
/* If the correct firmware patch file is not found, use the
* default firmware patch file instead
*/
snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
ver->hw_platform, ver->hw_variant);
if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
bt_dev_err(hdev, "failed to open default fw file: %s",
fwname);
return NULL;
}
}
bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
return fw;
}
static int btusb_setup_intel_patching(struct hci_dev *hdev,
const struct firmware *fw,
const u8 **fw_ptr, int *disable_patch)
{
struct sk_buff *skb;
struct hci_command_hdr *cmd;
const u8 *cmd_param;
struct hci_event_hdr *evt = NULL;
const u8 *evt_param = NULL;
int remain = fw->size - (*fw_ptr - fw->data);
/* The first byte indicates the types of the patch command or event.
* 0x01 means HCI command and 0x02 is HCI event. If the first bytes
* in the current firmware buffer doesn't start with 0x01 or
* the size of remain buffer is smaller than HCI command header,
* the firmware file is corrupted and it should stop the patching
* process.
*/
if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
return -EINVAL;
}
(*fw_ptr)++;
remain--;
cmd = (struct hci_command_hdr *)(*fw_ptr);
*fw_ptr += sizeof(*cmd);
remain -= sizeof(*cmd);
/* Ensure that the remain firmware data is long enough than the length
* of command parameter. If not, the firmware file is corrupted.
*/
if (remain < cmd->plen) {
bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
return -EFAULT;
}
/* If there is a command that loads a patch in the firmware
* file, then enable the patch upon success, otherwise just
* disable the manufacturer mode, for example patch activation
* is not required when the default firmware patch file is used
* because there are no patch data to load.
*/
if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
*disable_patch = 0;
cmd_param = *fw_ptr;
*fw_ptr += cmd->plen;
remain -= cmd->plen;
/* This reads the expected events when the above command is sent to the
* device. Some vendor commands expects more than one events, for
* example command status event followed by vendor specific event.
* For this case, it only keeps the last expected event. so the command
* can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
* last expected event.
*/
while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
(*fw_ptr)++;
remain--;
evt = (struct hci_event_hdr *)(*fw_ptr);
*fw_ptr += sizeof(*evt);
remain -= sizeof(*evt);
if (remain < evt->plen) {
bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
return -EFAULT;
}
evt_param = *fw_ptr;
*fw_ptr += evt->plen;
remain -= evt->plen;
}
/* Every HCI commands in the firmware file has its correspond event.
* If event is not found or remain is smaller than zero, the firmware
* file is corrupted.
*/
if (!evt || !evt_param || remain < 0) {
bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
return -EFAULT;
}
skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
cmd_param, evt->evt, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
cmd->opcode, PTR_ERR(skb));
return PTR_ERR(skb);
}
/* It ensures that the returned event matches the event data read from
* the firmware file. At fist, it checks the length and then
* the contents of the event.
*/
if (skb->len != evt->plen) {
bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
le16_to_cpu(cmd->opcode));
kfree_skb(skb);
return -EFAULT;
}
if (memcmp(skb->data, evt_param, evt->plen)) {
bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
le16_to_cpu(cmd->opcode));
kfree_skb(skb);
return -EFAULT;
}
kfree_skb(skb);
return 0;
}
static int btusb_setup_intel(struct hci_dev *hdev)
{
struct sk_buff *skb;
const struct firmware *fw;
const u8 *fw_ptr;
int disable_patch, err;
struct intel_version ver;
BT_DBG("%s", hdev->name);
/* The controller has a bug with the first HCI command sent to it
* returning number of completed commands as zero. This would stall the
* command processing in the Bluetooth core.
*
* As a workaround, send HCI Reset command first which will reset the
* number of completed commands and allow normal command processing
* from now on.
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "sending initial HCI reset command failed (%ld)",
PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
/* Read Intel specific controller version first to allow selection of
* which firmware file to load.
*
* The returned information are hardware variant and revision plus
* firmware variant, revision and build number.
*/
err = btintel_read_version(hdev, &ver);
if (err)
return err;
bt_dev_info(hdev, "read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
ver.hw_platform, ver.hw_variant, ver.hw_revision,
ver.fw_variant, ver.fw_revision, ver.fw_build_num,
ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);
/* fw_patch_num indicates the version of patch the device currently
* have. If there is no patch data in the device, it is always 0x00.
* So, if it is other than 0x00, no need to patch the device again.
*/
if (ver.fw_patch_num) {
bt_dev_info(hdev, "Intel device is already patched. "
"patch num: %02x", ver.fw_patch_num);
goto complete;
}
/* Opens the firmware patch file based on the firmware version read
* from the controller. If it fails to open the matching firmware
* patch file, it tries to open the default firmware patch file.
* If no patch file is found, allow the device to operate without
* a patch.
*/
fw = btusb_setup_intel_get_fw(hdev, &ver);
if (!fw)
goto complete;
fw_ptr = fw->data;
/* Enable the manufacturer mode of the controller.
* Only while this mode is enabled, the driver can download the
* firmware patch data and configuration parameters.
*/
err = btintel_enter_mfg(hdev);
if (err) {
release_firmware(fw);
return err;
}
disable_patch = 1;
/* The firmware data file consists of list of Intel specific HCI
* commands and its expected events. The first byte indicates the
* type of the message, either HCI command or HCI event.
*
* It reads the command and its expected event from the firmware file,
* and send to the controller. Once __hci_cmd_sync_ev() returns,
* the returned event is compared with the event read from the firmware
* file and it will continue until all the messages are downloaded to
* the controller.
*
* Once the firmware patching is completed successfully,
* the manufacturer mode is disabled with reset and activating the
* downloaded patch.
*
* If the firmware patching fails, the manufacturer mode is
* disabled with reset and deactivating the patch.
*
* If the default patch file is used, no reset is done when disabling
* the manufacturer.
*/
while (fw->size > fw_ptr - fw->data) {
int ret;
ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
&disable_patch);
if (ret < 0)
goto exit_mfg_deactivate;
}
release_firmware(fw);
if (disable_patch)
goto exit_mfg_disable;
/* Patching completed successfully and disable the manufacturer mode
* with reset and activate the downloaded firmware patches.
*/
err = btintel_exit_mfg(hdev, true, true);
if (err)
return err;
bt_dev_info(hdev, "Intel firmware patch completed and activated");
goto complete;
exit_mfg_disable:
/* Disable the manufacturer mode without reset */
err = btintel_exit_mfg(hdev, false, false);
if (err)
return err;
bt_dev_info(hdev, "Intel firmware patch completed");
goto complete;
exit_mfg_deactivate:
release_firmware(fw);
/* Patching failed. Disable the manufacturer mode with reset and
* deactivate the downloaded firmware patches.
*/
err = btintel_exit_mfg(hdev, true, false);
if (err)
return err;
bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
complete:
/* Set the event mask for Intel specific vendor events. This enables
* a few extra events that are useful during general operation.
*/
btintel_set_event_mask_mfg(hdev, false);
btintel_check_bdaddr(hdev);
return 0;
}
static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
{
struct sk_buff *skb;
struct hci_event_hdr *hdr;
struct hci_ev_cmd_complete *evt;
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
if (!skb)
return -ENOMEM;
hdr = skb_put(skb, sizeof(*hdr));
hdr->evt = HCI_EV_CMD_COMPLETE;
hdr->plen = sizeof(*evt) + 1;
evt = skb_put(skb, sizeof(*evt));
evt->ncmd = 0x01;
evt->opcode = cpu_to_le16(opcode);
skb_put_u8(skb, 0x00);
hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
return hci_recv_frame(hdev, skb);
}
static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
int count)
{
/* When the device is in bootloader mode, then it can send
* events via the bulk endpoint. These events are treated the
* same way as the ones received from the interrupt endpoint.
*/
if (test_bit(BTUSB_BOOTLOADER, &data->flags))
return btusb_recv_intr(data, buffer, count);
return btusb_recv_bulk(data, buffer, count);
}
static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
unsigned int len)
{
const struct intel_bootup *evt = ptr;
if (len != sizeof(*evt))
return;
if (test_and_clear_bit(BTUSB_BOOTING, &data->flags))
wake_up_bit(&data->flags, BTUSB_BOOTING);
}
static void btusb_intel_secure_send_result(struct btusb_data *data,
const void *ptr, unsigned int len)
{
const struct intel_secure_send_result *evt = ptr;
if (len != sizeof(*evt))
return;
if (evt->result)
set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
test_bit(BTUSB_FIRMWARE_LOADED, &data->flags))
wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
}
static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
struct hci_event_hdr *hdr = (void *)skb->data;
if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
hdr->plen > 0) {
const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
switch (skb->data[2]) {
case 0x02:
/* When switching to the operational firmware
* the device sends a vendor specific event
* indicating that the bootup completed.
*/
btusb_intel_bootup(data, ptr, len);
break;
case 0x06:
/* When the firmware loading completes the
* device sends out a vendor specific event
* indicating the result of the firmware
* loading.
*/
btusb_intel_secure_send_result(data, ptr, len);
break;
}
}
}
return hci_recv_frame(hdev, skb);
}
static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
BT_DBG("%s", hdev->name);
switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
struct hci_command_hdr *cmd = (void *)skb->data;
__u16 opcode = le16_to_cpu(cmd->opcode);
/* When in bootloader mode and the command 0xfc09
* is received, it needs to be send down the
* bulk endpoint. So allocate a bulk URB instead.
*/
if (opcode == 0xfc09)
urb = alloc_bulk_urb(hdev, skb);
else
urb = alloc_ctrl_urb(hdev, skb);
/* When the 0xfc01 command is issued to boot into
* the operational firmware, it will actually not
* send a command complete event. To keep the flow
* control working inject that event here.
*/
if (opcode == 0xfc01)
inject_cmd_complete(hdev, opcode);
} else {
urb = alloc_ctrl_urb(hdev, skb);
}
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.cmd_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_ACLDATA_PKT:
urb = alloc_bulk_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.acl_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_SCODATA_PKT:
if (hci_conn_num(hdev, SCO_LINK) < 1)
return -ENODEV;
urb = alloc_isoc_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.sco_tx++;
return submit_tx_urb(hdev, urb);
}
return -EILSEQ;
}
static bool btusb_setup_intel_new_get_fw_name(struct intel_version *ver,
struct intel_boot_params *params,
char *fw_name, size_t len,
const char *suffix)
{
switch (ver->hw_variant) {
case 0x0b: /* SfP */
case 0x0c: /* WsP */
snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
le16_to_cpu(ver->hw_variant),
le16_to_cpu(params->dev_revid),
suffix);
break;
case 0x11: /* JfP */
case 0x12: /* ThP */
case 0x13: /* HrP */
case 0x14: /* CcP */
snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
le16_to_cpu(ver->hw_variant),
le16_to_cpu(ver->hw_revision),
le16_to_cpu(ver->fw_revision),
suffix);
break;
default:
return false;
}
return true;
}
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct intel_version ver;
struct intel_boot_params params;
const struct firmware *fw;
u32 boot_param;
char fwname[64];
ktime_t calltime, delta, rettime;
unsigned long long duration;
int err;
BT_DBG("%s", hdev->name);
/* Set the default boot parameter to 0x0 and it is updated to
* SKU specific boot parameter after reading Intel_Write_Boot_Params
* command while downloading the firmware.
*/
boot_param = 0x00000000;
calltime = ktime_get();
/* Read the Intel version information to determine if the device
* is in bootloader mode or if it already has operational firmware
* loaded.
*/
err = btintel_read_version(hdev, &ver);
if (err)
return err;
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
*/
if (ver.hw_platform != 0x37) {
bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
ver.hw_platform);
return -EINVAL;
}
/* Check for supported iBT hardware variants of this firmware
* loading method.
*
* This check has been put in place to ensure correct forward
* compatibility options when newer hardware variants come along.
*/
switch (ver.hw_variant) {
case 0x0b: /* SfP */
case 0x0c: /* WsP */
case 0x11: /* JfP */
case 0x12: /* ThP */
case 0x13: /* HrP */
case 0x14: /* CcP */
break;
default:
bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
ver.hw_variant);
return -EINVAL;
}
btintel_version_info(hdev, &ver);
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
* the bootloader and the value 0x23 identifies the operational
* firmware.
*
* When the operational firmware is already present, then only
* the check for valid Bluetooth device address is needed. This
* determines if the device will be added as configured or
* unconfigured controller.
*
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
if (ver.fw_variant == 0x23) {
clear_bit(BTUSB_BOOTLOADER, &data->flags);
btintel_check_bdaddr(hdev);
return 0;
}
/* If the device is not in bootloader mode, then the only possible
* choice is to return an error and abort the device initialization.
*/
if (ver.fw_variant != 0x06) {
bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
ver.fw_variant);
return -ENODEV;
}
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/
err = btintel_read_boot_params(hdev, &params);
if (err)
return err;
/* It is required that every single firmware fragment is acknowledged
* with a command complete event. If the boot parameters indicate
* that this bootloader does not send them, then abort the setup.
*/
if (params.limited_cce != 0x00) {
bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
params.limited_cce);
return -EINVAL;
}
/* If the OTP has no valid Bluetooth device address, then there will
* also be no valid address for the operational firmware.
*/
if (!bacmp(&params.otp_bdaddr, BDADDR_ANY)) {
bt_dev_info(hdev, "No device address configured");
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
/* With this Intel bootloader only the hardware variant and device
* revision information are used to select the right firmware for SfP
* and WsP.
*
* The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
*
* Currently the supported hardware variants are:
* 11 (0x0b) for iBT3.0 (LnP/SfP)
* 12 (0x0c) for iBT3.5 (WsP)
*
* For ThP/JfP and for future SKU's, the FW name varies based on HW
* variant, HW revision and FW revision, as these are dependent on CNVi
* and RF Combination.
*
* 17 (0x11) for iBT3.5 (JfP)
* 18 (0x12) for iBT3.5 (ThP)
*
* The firmware file name for these will be
* ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
*
*/
err = btusb_setup_intel_new_get_fw_name(&ver, &params, fwname,
sizeof(fwname), "sfi");
if (!err) {
bt_dev_err(hdev, "Unsupported Intel firmware naming");
return -EINVAL;
}
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
return err;
}
bt_dev_info(hdev, "Found device firmware: %s", fwname);
/* Save the DDC file name for later use to apply once the firmware
* downloading is done.
*/
err = btusb_setup_intel_new_get_fw_name(&ver, &params, fwname,
sizeof(fwname), "ddc");
if (!err) {
bt_dev_err(hdev, "Unsupported Intel firmware naming");
return -EINVAL;
}
if (fw->size < 644) {
bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
fw->size);
err = -EBADF;
goto done;
}
set_bit(BTUSB_DOWNLOADING, &data->flags);
/* Start firmware downloading and get boot parameter */
err = btintel_download_firmware(hdev, fw, &boot_param);
if (err < 0)
goto done;
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
bt_dev_info(hdev, "Waiting for firmware download to complete");
/* Before switching the device into operational mode and with that
* booting the loaded firmware, wait for the bootloader notification
* that all fragments have been successfully received.
*
* When the event processing receives the notification, then the
* BTUSB_DOWNLOADING flag will be cleared.
*
* The firmware loading should not take longer than 5 seconds
* and thus just timeout if that happens and fail the setup
* of this device.
*/
err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
TASK_INTERRUPTIBLE,
msecs_to_jiffies(5000));
if (err == -EINTR) {
bt_dev_err(hdev, "Firmware loading interrupted");
goto done;
}
if (err) {
bt_dev_err(hdev, "Firmware loading timeout");
err = -ETIMEDOUT;
goto done;
}
if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
bt_dev_err(hdev, "Firmware loading failed");
err = -ENOEXEC;
goto done;
}
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
done:
release_firmware(fw);
if (err < 0)
return err;
calltime = ktime_get();
set_bit(BTUSB_BOOTING, &data->flags);
err = btintel_send_intel_reset(hdev, boot_param);
if (err)
return err;
/* The bootloader will not indicate when the device is ready. This
* is done by the operational firmware sending bootup notification.
*
* Booting into operational firmware should not take longer than
* 1 second. However if that happens, then just fail the setup
* since something went wrong.
*/
bt_dev_info(hdev, "Waiting for device to boot");
err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
TASK_INTERRUPTIBLE,
msecs_to_jiffies(1000));
if (err == -EINTR) {
bt_dev_err(hdev, "Device boot interrupted");
return -EINTR;
}
if (err) {
bt_dev_err(hdev, "Device boot timeout");
return -ETIMEDOUT;
}
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Device booted in %llu usecs", duration);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
/* Once the device is running in operational mode, it needs to apply
* the device configuration (DDC) parameters.
*
* The device can work without DDC parameters, so even if it fails
* to load the file, no need to fail the setup.
*/
btintel_load_ddc_config(hdev, fwname);
/* Set the event mask for Intel specific vendor events. This enables
* a few extra events that are useful during general operation. It
* does not enable any debugging related events.
*
* The device will function correctly without these events enabled
* and thus no need to fail the setup.
*/
btintel_set_event_mask(hdev, false);
return 0;
}
static int btusb_shutdown_intel(struct hci_dev *hdev)
{
struct sk_buff *skb;
long ret;
/* In the shutdown sequence where Bluetooth is turned off followed
* by WiFi being turned off, turning WiFi back on causes issue with
* the RF calibration.
*
* To ensure that any RF activity has been stopped, issue HCI Reset
* command to clear all ongoing activity including advertising,
* scanning etc.
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
bt_dev_err(hdev, "HCI reset during shutdown failed");
return ret;
}
kfree_skb(skb);
/* Some platforms have an issue with BT LED when the interface is
* down or BT radio is turned off, which takes 5 seconds to BT LED
* goes off. This command turns off the BT LED immediately.
*/
skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
bt_dev_err(hdev, "turning off Intel device LED failed");
return ret;
}
kfree_skb(skb);
return 0;
}
static int btusb_shutdown_intel_new(struct hci_dev *hdev)
{
struct sk_buff *skb;
/* Send HCI Reset to the controller to stop any BT activity which
* were triggered. This will help to save power and maintain the
* sync b/w Host and controller
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
bt_dev_err(hdev, "HCI reset during shutdown failed");
return PTR_ERR(skb);
}
kfree_skb(skb);
return 0;
}
#ifdef CONFIG_BT_HCIBTUSB_MTK
#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
#define HCI_WMT_MAX_EVENT_SIZE 64
enum {
BTMTK_WMT_PATCH_DWNLD = 0x1,
BTMTK_WMT_FUNC_CTRL = 0x6,
BTMTK_WMT_RST = 0x7,
BTMTK_WMT_SEMAPHORE = 0x17,
};
enum {
BTMTK_WMT_INVALID,
BTMTK_WMT_PATCH_UNDONE,
BTMTK_WMT_PATCH_DONE,
BTMTK_WMT_ON_UNDONE,
BTMTK_WMT_ON_DONE,
BTMTK_WMT_ON_PROGRESS,
};
struct btmtk_wmt_hdr {
u8 dir;
u8 op;
__le16 dlen;
u8 flag;
} __packed;
struct btmtk_hci_wmt_cmd {
struct btmtk_wmt_hdr hdr;
u8 data[256];
} __packed;
struct btmtk_hci_wmt_evt {
struct hci_event_hdr hhdr;
struct btmtk_wmt_hdr whdr;
} __packed;
struct btmtk_hci_wmt_evt_funcc {
struct btmtk_hci_wmt_evt hwhdr;
__be16 status;
} __packed;
struct btmtk_tci_sleep {
u8 mode;
__le16 duration;
__le16 host_duration;
u8 host_wakeup_pin;
u8 time_compensation;
} __packed;
struct btmtk_hci_wmt_params {
u8 op;
u8 flag;
u16 dlen;
const void *data;
u32 *status;
};
static void btusb_mtk_wmt_recv(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
struct hci_event_hdr *hdr;
struct sk_buff *skb;
int err;
if (urb->status == 0 && urb->actual_length > 0) {
hdev->stat.byte_rx += urb->actual_length;
/* WMT event shouldn't be fragmented and the size should be
* less than HCI_WMT_MAX_EVENT_SIZE.
*/
skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
if (!skb) {
hdev->stat.err_rx++;
goto err_out;
}
hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
skb_put_data(skb, urb->transfer_buffer, urb->actual_length);
hdr = (void *)skb->data;
/* Fix up the vendor event id with 0xff for vendor specific
* instead of 0xe4 so that event send via monitoring socket can
* be parsed properly.
*/
hdr->evt = 0xff;
/* When someone waits for the WMT event, the skb is being cloned
* and being processed the events from there then.
*/
if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) {
data->evt_skb = skb_clone(skb, GFP_KERNEL);
if (!data->evt_skb)
goto err_out;
}
err = hci_recv_frame(hdev, skb);
if (err < 0)
goto err_free_skb;
if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT,
&data->flags)) {
/* Barrier to sync with other CPUs */
smp_mb__after_atomic();
wake_up_bit(&data->flags,
BTUSB_TX_WAIT_VND_EVT);
}
err_out:
return;
err_free_skb:
kfree_skb(data->evt_skb);
data->evt_skb = NULL;
return;
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
usb_mark_last_busy(data->udev);
/* The URB complete handler is still called with urb->actual_length = 0
* when the event is not available, so we should keep re-submitting
* URB until WMT event returns, Also, It's necessary to wait some time
* between the two consecutive control URBs to relax the target device
* to generate the event. Otherwise, the WMT event cannot return from
* the device successfully.
*/
udelay(100);
usb_anchor_urb(urb, &data->ctrl_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected
*/
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
}
static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
unsigned char *buf;
int err, size = 64;
unsigned int pipe;
struct urb *urb;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
dr = kmalloc(sizeof(*dr), GFP_KERNEL);
if (!dr) {
usb_free_urb(urb);
return -ENOMEM;
}
dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN;
dr->bRequest = 1;
dr->wIndex = cpu_to_le16(0);
dr->wValue = cpu_to_le16(48);
dr->wLength = cpu_to_le16(size);
buf = kmalloc(size, GFP_KERNEL);
if (!buf) {
kfree(dr);
return -ENOMEM;
}
pipe = usb_rcvctrlpipe(data->udev, 0);
usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
buf, size, btusb_mtk_wmt_recv, hdev);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_anchor_urb(urb, &data->ctrl_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
bt_dev_err(hdev, "urb %p submission failed (%d)",
urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
struct btmtk_hci_wmt_params *wmt_params)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
u32 hlen, status = BTMTK_WMT_INVALID;
struct btmtk_hci_wmt_evt *wmt_evt;
struct btmtk_hci_wmt_cmd wc;
struct btmtk_wmt_hdr *hdr;
int err;
/* Submit control IN URB on demand to process the WMT event */
err = btusb_mtk_submit_wmt_recv_urb(hdev);
if (err < 0)
return err;
/* Send the WMT command and wait until the WMT event returns */
hlen = sizeof(*hdr) + wmt_params->dlen;
if (hlen > 255)
return -EINVAL;
hdr = (struct btmtk_wmt_hdr *)&wc;
hdr->dir = 1;
hdr->op = wmt_params->op;
hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
hdr->flag = wmt_params->flag;
memcpy(wc.data, wmt_params->data, wmt_params->dlen);
set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
if (err < 0) {
clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
return err;
}
/* The vendor specific WMT commands are all answered by a vendor
* specific event and will have the Command Status or Command
* Complete as with usual HCI command flow control.
*
* After sending the command, wait for BTUSB_TX_WAIT_VND_EVT
* state to be cleared. The driver specific event receive routine
* will clear that state and with that indicate completion of the
* WMT command.
*/
err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT,
TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
if (err == -EINTR) {
bt_dev_err(hdev, "Execution of wmt command interrupted");
clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
return err;
}
if (err) {
bt_dev_err(hdev, "Execution of wmt command timed out");
clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
return -ETIMEDOUT;
}
/* Parse and handle the return WMT event */
wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data;
if (wmt_evt->whdr.op != hdr->op) {
bt_dev_err(hdev, "Wrong op received %d expected %d",
wmt_evt->whdr.op, hdr->op);
err = -EIO;
goto err_free_skb;
}
switch (wmt_evt->whdr.op) {
case BTMTK_WMT_SEMAPHORE:
if (wmt_evt->whdr.flag == 2)
status = BTMTK_WMT_PATCH_UNDONE;
else
status = BTMTK_WMT_PATCH_DONE;
break;
case BTMTK_WMT_FUNC_CTRL:
wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
status = BTMTK_WMT_ON_DONE;
else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
status = BTMTK_WMT_ON_PROGRESS;
else
status = BTMTK_WMT_ON_UNDONE;
break;
}
if (wmt_params->status)
*wmt_params->status = status;
err_free_skb:
kfree_skb(data->evt_skb);
data->evt_skb = NULL;
return err;
}
static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
{
struct btmtk_hci_wmt_params wmt_params;
const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
int err, dlen;
u8 flag;
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
return err;
}
fw_ptr = fw->data;
fw_size = fw->size;
/* The size of patch header is 30 bytes, should be skip */
if (fw_size < 30) {
err = -EINVAL;
goto err_release_fw;
}
fw_size -= 30;
fw_ptr += 30;
flag = 1;
wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
wmt_params.status = NULL;
while (fw_size > 0) {
dlen = min_t(int, 250, fw_size);
/* Tell deivice the position in sequence */
if (fw_size - dlen <= 0)
flag = 3;
else if (fw_size < fw->size - 30)
flag = 2;
wmt_params.flag = flag;
wmt_params.dlen = dlen;
wmt_params.data = fw_ptr;
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
err);
goto err_release_fw;
}
fw_size -= dlen;
fw_ptr += dlen;
}
wmt_params.op = BTMTK_WMT_RST;
wmt_params.flag = 4;
wmt_params.dlen = 0;
wmt_params.data = NULL;
wmt_params.status = NULL;
/* Activate funciton the firmware providing to */
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
return err;
}
/* Wait a few moments for firmware activation done */
usleep_range(10000, 12000);
err_release_fw:
release_firmware(fw);
return err;
}
static int btusb_mtk_func_query(struct hci_dev *hdev)
{
struct btmtk_hci_wmt_params wmt_params;
int status, err;
u8 param = 0;
/* Query whether the function is enabled */
wmt_params.op = BTMTK_WMT_FUNC_CTRL;
wmt_params.flag = 4;
wmt_params.dlen = sizeof(param);
wmt_params.data = &param;
wmt_params.status = &status;
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to query function status (%d)", err);
return err;
}
return status;
}
static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val)
{
int pipe, err, size = sizeof(u32);
void *buf;
buf = kzalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
pipe = usb_rcvctrlpipe(data->udev, 0);
err = usb_control_msg(data->udev, pipe, 0x63,
USB_TYPE_VENDOR | USB_DIR_IN,
reg >> 16, reg & 0xffff,
buf, size, USB_CTRL_SET_TIMEOUT);
if (err < 0)
goto err_free_buf;
*val = get_unaligned_le32(buf);
err_free_buf:
kfree(buf);
return err;
}
static int btusb_mtk_id_get(struct btusb_data *data, u32 *id)
{
return btusb_mtk_reg_read(data, 0x80000008, id);
}
static int btusb_mtk_setup(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_params wmt_params;
ktime_t calltime, delta, rettime;
struct btmtk_tci_sleep tci_sleep;
unsigned long long duration;
struct sk_buff *skb;
const char *fwname;
int err, status;
u32 dev_id;
u8 param;
calltime = ktime_get();
err = btusb_mtk_id_get(data, &dev_id);
if (err < 0) {
bt_dev_err(hdev, "Failed to get device id (%d)", err);
return err;
}
switch (dev_id) {
case 0x7663:
fwname = FIRMWARE_MT7663;
break;
case 0x7668:
fwname = FIRMWARE_MT7668;
break;
default:
bt_dev_err(hdev, "Unsupported support hardware variant (%08x)",
dev_id);
return -ENODEV;
}
/* Query whether the firmware is already download */
wmt_params.op = BTMTK_WMT_SEMAPHORE;
wmt_params.flag = 1;
wmt_params.dlen = 0;
wmt_params.data = NULL;
wmt_params.status = &status;
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
return err;
}
if (status == BTMTK_WMT_PATCH_DONE) {
bt_dev_info(hdev, "firmware already downloaded");
goto ignore_setup_fw;
}
/* Setup a firmware which the device definitely requires */
err = btusb_mtk_setup_firmware(hdev, fwname);
if (err < 0)
return err;
ignore_setup_fw:
err = readx_poll_timeout(btusb_mtk_func_query, hdev, status,
status < 0 || status != BTMTK_WMT_ON_PROGRESS,
2000, 5000000);
/* -ETIMEDOUT happens */
if (err < 0)
return err;
/* The other errors happen in btusb_mtk_func_query */
if (status < 0)
return status;
if (status == BTMTK_WMT_ON_DONE) {
bt_dev_info(hdev, "function already on");
goto ignore_func_on;
}
/* Enable Bluetooth protocol */
param = 1;
wmt_params.op = BTMTK_WMT_FUNC_CTRL;
wmt_params.flag = 0;
wmt_params.dlen = sizeof(param);
wmt_params.data = &param;
wmt_params.status = NULL;
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
return err;
}
ignore_func_on:
/* Apply the low power environment setup */
tci_sleep.mode = 0x5;
tci_sleep.duration = cpu_to_le16(0x640);
tci_sleep.host_duration = cpu_to_le16(0x640);
tci_sleep.host_wakeup_pin = 0;
tci_sleep.time_compensation = 0;
skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
return err;
}
kfree_skb(skb);
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long)ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Device setup in %llu usecs", duration);
return 0;
}
static int btusb_mtk_shutdown(struct hci_dev *hdev)
{
struct btmtk_hci_wmt_params wmt_params;
u8 param = 0;
int err;
/* Disable the device */
wmt_params.op = BTMTK_WMT_FUNC_CTRL;
wmt_params.flag = 0;
wmt_params.dlen = sizeof(param);
wmt_params.data = &param;
wmt_params.status = NULL;
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
return err;
}
return 0;
}
MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);
#endif
#ifdef CONFIG_PM
/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
static int marvell_config_oob_wake(struct hci_dev *hdev)
{
struct sk_buff *skb;
struct btusb_data *data = hci_get_drvdata(hdev);
struct device *dev = &data->udev->dev;
u16 pin, gap, opcode;
int ret;
u8 cmd[5];
/* Move on if no wakeup pin specified */
if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) ||
of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap))
return 0;
/* Vendor specific command to configure a GPIO as wake-up pin */
opcode = hci_opcode_pack(0x3F, 0x59);
cmd[0] = opcode & 0xFF;
cmd[1] = opcode >> 8;
cmd[2] = 2; /* length of parameters that follow */
cmd[3] = pin;
cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */
skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
if (!skb) {
bt_dev_err(hdev, "%s: No memory\n", __func__);
return -ENOMEM;
}
skb_put_data(skb, cmd, sizeof(cmd));
hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
ret = btusb_send_frame(hdev, skb);
if (ret) {
bt_dev_err(hdev, "%s: configuration failed\n", __func__);
kfree_skb(skb);
return ret;
}
return 0;
}
#endif
static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
u8 buf[8];
long ret;
buf[0] = 0xfe;
buf[1] = sizeof(bdaddr_t);
memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
bt_dev_err(hdev, "changing Marvell device address failed (%ld)",
ret);
return ret;
}
kfree_skb(skb);
return 0;
}
static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
u8 buf[10];
long ret;
buf[0] = 0x01;
buf[1] = 0x01;
buf[2] = 0x00;
buf[3] = sizeof(bdaddr_t);
memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
bt_dev_err(hdev, "Change address command failed (%ld)", ret);
return ret;
}
kfree_skb(skb);
return 0;
}
#define QCA_DFU_PACKET_LEN 4096
#define QCA_GET_TARGET_VERSION 0x09
#define QCA_CHECK_STATUS 0x05
#define QCA_DFU_DOWNLOAD 0x01
#define QCA_SYSCFG_UPDATED 0x40
#define QCA_PATCH_UPDATED 0x80
#define QCA_DFU_TIMEOUT 3000
struct qca_version {
__le32 rom_version;
__le32 patch_version;
__le32 ram_version;
__le32 ref_clock;
__u8 reserved[4];
} __packed;
struct qca_rampatch_version {
__le16 rom_version;
__le16 patch_version;
} __packed;
struct qca_device_info {
u32 rom_version;
u8 rampatch_hdr; /* length of header in rampatch */
u8 nvm_hdr; /* length of header in NVM */
u8 ver_offset; /* offset of version structure in rampatch */
};
static const struct qca_device_info qca_devices_table[] = {
{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
{ 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
};
static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
void *data, u16 size)
{
int pipe, err;
u8 *buf;
buf = kmalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* Found some of USB hosts have IOT issues with ours so that we should
* not wait until HCI layer is ready.
*/
pipe = usb_rcvctrlpipe(udev, 0);
err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
if (err < 0) {
dev_err(&udev->dev, "Failed to access otp area (%d)", err);
goto done;
}
memcpy(data, buf, size);
done:
kfree(buf);
return err;
}
static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
const struct firmware *firmware,
size_t hdr_size)
{
struct btusb_data *btdata = hci_get_drvdata(hdev);
struct usb_device *udev = btdata->udev;
size_t count, size, sent = 0;
int pipe, len, err;
u8 *buf;
buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
if (!buf)
return -ENOMEM;
count = firmware->size;
size = min_t(size_t, count, hdr_size);
memcpy(buf, firmware->data, size);
/* USB patches should go down to controller through USB path
* because binary format fits to go down through USB channel.
* USB control path is for patching headers and USB bulk is for
* patch body.
*/
pipe = usb_sndctrlpipe(udev, 0);
err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
if (err < 0) {
bt_dev_err(hdev, "Failed to send headers (%d)", err);
goto done;
}
sent += size;
count -= size;
while (count) {
size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
memcpy(buf, firmware->data + sent, size);
pipe = usb_sndbulkpipe(udev, 0x02);
err = usb_bulk_msg(udev, pipe, buf, size, &len,
QCA_DFU_TIMEOUT);
if (err < 0) {
bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)",
sent, firmware->size, err);
break;
}
if (size != len) {
bt_dev_err(hdev, "Failed to get bulk buffer");
err = -EILSEQ;
break;
}
sent += size;
count -= size;
}
done:
kfree(buf);
return err;
}
static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
struct qca_version *ver,
const struct qca_device_info *info)
{
struct qca_rampatch_version *rver;
const struct firmware *fw;
u32 ver_rom, ver_patch;
u16 rver_rom, rver_patch;
char fwname[64];
int err;
ver_rom = le32_to_cpu(ver->rom_version);
ver_patch = le32_to_cpu(ver->patch_version);
snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
err = request_firmware(&fw, fwname, &hdev->dev);
if (err) {
bt_dev_err(hdev, "failed to request rampatch file: %s (%d)",
fwname, err);
return err;
}
bt_dev_info(hdev, "using rampatch file: %s", fwname);
rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
rver_rom = le16_to_cpu(rver->rom_version);
rver_patch = le16_to_cpu(rver->patch_version);
bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
"firmware rome 0x%x build 0x%x",
rver_rom, rver_patch, ver_rom, ver_patch);
if (rver_rom != ver_rom || rver_patch <= ver_patch) {
bt_dev_err(hdev, "rampatch file version did not match with firmware");
err = -EINVAL;
goto done;
}
err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
done:
release_firmware(fw);
return err;
}
static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
struct qca_version *ver,
const struct qca_device_info *info)
{
const struct firmware *fw;
char fwname[64];
int err;
snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
le32_to_cpu(ver->rom_version));
err = request_firmware(&fw, fwname, &hdev->dev);
if (err) {
bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
fwname, err);
return err;
}
bt_dev_info(hdev, "using NVM file: %s", fwname);
err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
release_firmware(fw);
return err;
}
/* identify the ROM version and check whether patches are needed */
static bool btusb_qca_need_patch(struct usb_device *udev)
{
struct qca_version ver;
if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
sizeof(ver)) < 0)
return false;
/* only low ROM versions need patches */
return !(le32_to_cpu(ver.rom_version) & ~0xffffU);
}
static int btusb_setup_qca(struct hci_dev *hdev)
{
struct btusb_data *btdata = hci_get_drvdata(hdev);
struct usb_device *udev = btdata->udev;
const struct qca_device_info *info = NULL;
struct qca_version ver;
u32 ver_rom;
u8 status;
int i, err;
err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
sizeof(ver));
if (err < 0)
return err;
ver_rom = le32_to_cpu(ver.rom_version);
/* Don't care about high ROM versions */
if (ver_rom & ~0xffffU)
return 0;
for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
if (ver_rom == qca_devices_table[i].rom_version)
info = &qca_devices_table[i];
}
if (!info) {
bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom);
return -ENODEV;
}
err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status,
sizeof(status));
if (err < 0)
return err;
if (!(status & QCA_PATCH_UPDATED)) {
err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
if (err < 0)
return err;
}
if (!(status & QCA_SYSCFG_UPDATED)) {
err = btusb_setup_qca_load_nvm(hdev, &ver, info);
if (err < 0)
return err;
}
return 0;
}
#ifdef CONFIG_BT_HCIBTUSB_BCM
static inline int __set_diag_interface(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_interface *intf = data->diag;
int i;
if (!data->diag)
return -ENODEV;
data->diag_tx_ep = NULL;
data->diag_rx_ep = NULL;
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
struct usb_endpoint_descriptor *ep_desc;
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
data->diag_tx_ep = ep_desc;
continue;
}
if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
data->diag_rx_ep = ep_desc;
continue;
}
}
if (!data->diag_tx_ep || !data->diag_rx_ep) {
bt_dev_err(hdev, "invalid diagnostic descriptors");
return -ENODEV;
}
return 0;
}
static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct sk_buff *skb;
struct urb *urb;
unsigned int pipe;
if (!data->diag_tx_ep)
return ERR_PTR(-ENODEV);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
skb = bt_skb_alloc(2, GFP_KERNEL);
if (!skb) {
usb_free_urb(urb);
return ERR_PTR(-ENOMEM);
}
skb_put_u8(skb, 0xf0);
skb_put_u8(skb, enable);
pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
skb->dev = (void *)hdev;
return urb;
}
static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
if (!data->diag)
return -ENODEV;
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -ENETDOWN;
urb = alloc_diag_urb(hdev, enable);
if (IS_ERR(urb))
return PTR_ERR(urb);
return submit_or_queue_tx_urb(hdev, urb);
}
#endif
#ifdef CONFIG_PM
static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
{
struct btusb_data *data = priv;
pm_wakeup_event(&data->udev->dev, 0);
pm_system_wakeup();
/* Disable only if not already disabled (keep it balanced) */
if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
disable_irq_nosync(irq);
disable_irq_wake(irq);
}
return IRQ_HANDLED;
}
static const struct of_device_id btusb_match_table[] = {
{ .compatible = "usb1286,204e" },
{ .compatible = "usbcf3,e300" }, /* QCA6174A */
{ .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */
{ }
};
MODULE_DEVICE_TABLE(of, btusb_match_table);
/* Use an oob wakeup pin? */
static int btusb_config_oob_wake(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct device *dev = &data->udev->dev;
int irq, ret;
clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
if (!of_match_device(btusb_match_table, dev))
return 0;
/* Move on if no IRQ specified */
irq = of_irq_get_byname(dev->of_node, "wakeup");
if (irq <= 0) {
bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__);
return 0;
}
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
0, "OOB Wake-on-BT", data);
if (ret) {
bt_dev_err(hdev, "%s: IRQ request failed", __func__);
return ret;
}
ret = device_init_wakeup(dev, true);
if (ret) {
bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);
return ret;
}
data->oob_wake_irq = irq;
bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
return 0;
}
#endif
static void btusb_check_needs_reset_resume(struct usb_interface *intf)
{
if (dmi_check_system(btusb_needs_reset_resume_table))
interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
}
static int btusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_endpoint_descriptor *ep_desc;
struct gpio_desc *reset_gpio;
struct btusb_data *data;
struct hci_dev *hdev;
unsigned ifnum_base;
int i, err;
BT_DBG("intf %p id %p", intf, id);
/* interface numbers are hardcoded in the spec */
if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
if (!(id->driver_info & BTUSB_IFNUM_2))
return -ENODEV;
if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
return -ENODEV;
}
ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
if (!id->driver_info) {
const struct usb_device_id *match;
match = usb_match_id(intf, blacklist_table);
if (match)
id = match;
}
if (id->driver_info == BTUSB_IGNORE)
return -ENODEV;
if (id->driver_info & BTUSB_ATH3012) {
struct usb_device *udev = interface_to_usbdev(intf);
/* Old firmware would otherwise let ath3k driver load
* patch and sysconfig files
*/
if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 &&
!btusb_qca_need_patch(udev))
return -ENODEV;
}
data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
data->intr_ep = ep_desc;
continue;
}
if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
data->bulk_tx_ep = ep_desc;
continue;
}
if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
data->bulk_rx_ep = ep_desc;
continue;
}
}
if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
return -ENODEV;
if (id->driver_info & BTUSB_AMP) {
data->cmdreq_type = USB_TYPE_CLASS | 0x01;
data->cmdreq = 0x2b;
} else {
data->cmdreq_type = USB_TYPE_CLASS;
data->cmdreq = 0x00;
}
data->udev = interface_to_usbdev(intf);
data->intf = intf;
INIT_WORK(&data->work, btusb_work);
INIT_WORK(&data->waker, btusb_waker);
init_usb_anchor(&data->deferred);
init_usb_anchor(&data->tx_anchor);
spin_lock_init(&data->txlock);
init_usb_anchor(&data->intr_anchor);
init_usb_anchor(&data->bulk_anchor);
init_usb_anchor(&data->isoc_anchor);
init_usb_anchor(&data->diag_anchor);
init_usb_anchor(&data->ctrl_anchor);
spin_lock_init(&data->rxlock);
if (id->driver_info & BTUSB_INTEL_NEW) {
data->recv_event = btusb_recv_event_intel;
data->recv_bulk = btusb_recv_bulk_intel;
set_bit(BTUSB_BOOTLOADER, &data->flags);
} else {
data->recv_event = hci_recv_frame;
data->recv_bulk = btusb_recv_bulk;
}
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
hdev->bus = HCI_USB;
hci_set_drvdata(hdev, data);
if (id->driver_info & BTUSB_AMP)
hdev->dev_type = HCI_AMP;
else
hdev->dev_type = HCI_PRIMARY;
data->hdev = hdev;
SET_HCIDEV_DEV(hdev, &intf->dev);
reset_gpio = gpiod_get_optional(&data->udev->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(reset_gpio)) {
err = PTR_ERR(reset_gpio);
goto out_free_dev;
} else if (reset_gpio) {
data->reset_gpio = reset_gpio;
}
hdev->open = btusb_open;
hdev->close = btusb_close;
hdev->flush = btusb_flush;
hdev->send = btusb_send_frame;
hdev->notify = btusb_notify;
#ifdef CONFIG_PM
err = btusb_config_oob_wake(hdev);
if (err)
goto out_free_dev;
/* Marvell devices may need a specific chip configuration */
if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
err = marvell_config_oob_wake(hdev);
if (err)
goto out_free_dev;
}
#endif
if (id->driver_info & BTUSB_CW6622)
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
if (id->driver_info & BTUSB_BCM2045)
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
if (id->driver_info & BTUSB_BCM92035)
hdev->setup = btusb_setup_bcm92035;
#ifdef CONFIG_BT_HCIBTUSB_BCM
if (id->driver_info & BTUSB_BCM_PATCHRAM) {
hdev->manufacturer = 15;
hdev->setup = btbcm_setup_patchram;
hdev->set_diag = btusb_bcm_set_diag;
hdev->set_bdaddr = btbcm_set_bdaddr;
/* Broadcom LM_DIAG Interface numbers are hardcoded */
data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
if (id->driver_info & BTUSB_BCM_APPLE) {
hdev->manufacturer = 15;
hdev->setup = btbcm_setup_apple;
hdev->set_diag = btusb_bcm_set_diag;
/* Broadcom LM_DIAG Interface numbers are hardcoded */
data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
#endif
if (id->driver_info & BTUSB_INTEL) {
hdev->manufacturer = 2;
hdev->setup = btusb_setup_intel;
hdev->shutdown = btusb_shutdown_intel;
hdev->set_diag = btintel_set_diag_mfg;
hdev->set_bdaddr = btintel_set_bdaddr;
hdev->cmd_timeout = btusb_intel_cmd_timeout;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL_NEW) {
hdev->manufacturer = 2;
hdev->send = btusb_send_frame_intel;
hdev->setup = btusb_setup_intel_new;
hdev->shutdown = btusb_shutdown_intel_new;
hdev->hw_error = btintel_hw_error;
hdev->set_diag = btintel_set_diag;
hdev->set_bdaddr = btintel_set_bdaddr;
hdev->cmd_timeout = btusb_intel_cmd_timeout;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
}
if (id->driver_info & BTUSB_MARVELL)
hdev->set_bdaddr = btusb_set_bdaddr_marvell;
#ifdef CONFIG_BT_HCIBTUSB_MTK
if (id->driver_info & BTUSB_MEDIATEK) {
hdev->setup = btusb_mtk_setup;
hdev->shutdown = btusb_mtk_shutdown;
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
}
#endif
if (id->driver_info & BTUSB_SWAVE) {
set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL_BOOT) {
hdev->manufacturer = 2;
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
}
if (id->driver_info & BTUSB_ATH3012) {
data->setup_on_usb = btusb_setup_qca;
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
if (id->driver_info & BTUSB_QCA_ROME) {
data->setup_on_usb = btusb_setup_qca;
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
btusb_check_needs_reset_resume(intf);
}
#ifdef CONFIG_BT_HCIBTUSB_RTL
if (id->driver_info & BTUSB_REALTEK) {
hdev->setup = btrtl_setup_realtek;
hdev->shutdown = btrtl_shutdown_realtek;
hdev->cmd_timeout = btusb_rtl_cmd_timeout;
/* Realtek devices lose their updated firmware over global
* suspend that means host doesn't send SET_FEATURE
* (DEVICE_REMOTE_WAKEUP)
*/
set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
}
#endif
if (id->driver_info & BTUSB_AMP) {
/* AMP controllers do not support SCO packets */
data->isoc = NULL;
} else {
/* Interface orders are hardcoded in the specification */
data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
data->isoc_ifnum = ifnum_base + 1;
}
if (!reset)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
if (!disable_scofix)
set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
}
if (id->driver_info & BTUSB_BROKEN_ISOC)
data->isoc = NULL;
if (id->driver_info & BTUSB_DIGIANSWER) {
data->cmdreq_type = USB_TYPE_VENDOR;
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
}
if (id->driver_info & BTUSB_CSR) {
struct usb_device *udev = data->udev;
u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
/* Old firmware would otherwise execute USB reset */
if (bcdDevice < 0x117)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
/* Fake CSR devices with broken commands */
if (bcdDevice <= 0x100 || bcdDevice == 0x134)
hdev->setup = btusb_setup_csr;
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
}
if (id->driver_info & BTUSB_SNIFFER) {
struct usb_device *udev = data->udev;
/* New sniffer firmware has crippled HCI interface */
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL_BOOT) {
/* A bug in the bootloader causes that interrupt interface is
* only enabled after receiving SetInterface(0, AltSetting=0).
*/
err = usb_set_interface(data->udev, 0, 0);
if (err < 0) {
BT_ERR("failed to set interface 0, alt 0 %d", err);
goto out_free_dev;
}
}
if (data->isoc) {
err = usb_driver_claim_interface(&btusb_driver,
data->isoc, data);
if (err < 0)
goto out_free_dev;
}
#ifdef CONFIG_BT_HCIBTUSB_BCM
if (data->diag) {
if (!usb_driver_claim_interface(&btusb_driver,
data->diag, data))
__set_diag_interface(hdev);
else
data->diag = NULL;
}
#endif
if (enable_autosuspend)
usb_enable_autosuspend(data->udev);
err = hci_register_dev(hdev);
if (err < 0)
goto out_free_dev;
usb_set_intfdata(intf, data);
return 0;
out_free_dev:
if (data->reset_gpio)
gpiod_put(data->reset_gpio);
hci_free_dev(hdev);
return err;
}
static void btusb_disconnect(struct usb_interface *intf)
{
struct btusb_data *data = usb_get_intfdata(intf);
struct hci_dev *hdev;
BT_DBG("intf %p", intf);
if (!data)
return;
hdev = data->hdev;
usb_set_intfdata(data->intf, NULL);
if (data->isoc)
usb_set_intfdata(data->isoc, NULL);
if (data->diag)
usb_set_intfdata(data->diag, NULL);
hci_unregister_dev(hdev);
if (intf == data->intf) {
if (data->isoc)
usb_driver_release_interface(&btusb_driver, data->isoc);
if (data->diag)
usb_driver_release_interface(&btusb_driver, data->diag);
} else if (intf == data->isoc) {
if (data->diag)
usb_driver_release_interface(&btusb_driver, data->diag);
usb_driver_release_interface(&btusb_driver, data->intf);
} else if (intf == data->diag) {
usb_driver_release_interface(&btusb_driver, data->intf);
if (data->isoc)
usb_driver_release_interface(&btusb_driver, data->isoc);
}
if (data->oob_wake_irq)
device_init_wakeup(&data->udev->dev, false);
if (data->reset_gpio)
gpiod_put(data->reset_gpio);
hci_free_dev(hdev);
}
#ifdef CONFIG_PM
static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct btusb_data *data = usb_get_intfdata(intf);
BT_DBG("intf %p", intf);
if (data->suspend_count++)
return 0;
spin_lock_irq(&data->txlock);
if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
set_bit(BTUSB_SUSPENDING, &data->flags);
spin_unlock_irq(&data->txlock);
} else {
spin_unlock_irq(&data->txlock);
data->suspend_count--;
return -EBUSY;
}
cancel_work_sync(&data->work);
btusb_stop_traffic(data);
usb_kill_anchored_urbs(&data->tx_anchor);
if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) {
set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
enable_irq_wake(data->oob_wake_irq);
enable_irq(data->oob_wake_irq);
}
/* For global suspend, Realtek devices lose the loaded fw
* in them. But for autosuspend, firmware should remain.
* Actually, it depends on whether the usb host sends
* set feature (enable wakeup) or not.
*/
if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags)) {
if (PMSG_IS_AUTO(message) &&
device_can_wakeup(&data->udev->dev))
data->udev->do_remote_wakeup = 1;
else if (!PMSG_IS_AUTO(message))
data->udev->reset_resume = 1;
}
return 0;
}
static void play_deferred(struct btusb_data *data)
{
struct urb *urb;
int err;
while ((urb = usb_get_from_anchor(&data->deferred))) {
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p submission failed (%d)",
data->hdev->name, urb, -err);
kfree(urb->setup_packet);
usb_unanchor_urb(urb);
usb_free_urb(urb);
break;
}
data->tx_in_flight++;
usb_free_urb(urb);
}
/* Cleanup the rest deferred urbs. */
while ((urb = usb_get_from_anchor(&data->deferred))) {
kfree(urb->setup_packet);
usb_free_urb(urb);
}
}
static int btusb_resume(struct usb_interface *intf)
{
struct btusb_data *data = usb_get_intfdata(intf);
struct hci_dev *hdev = data->hdev;
int err = 0;
BT_DBG("intf %p", intf);
if (--data->suspend_count)
return 0;
/* Disable only if not already disabled (keep it balanced) */
if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
disable_irq(data->oob_wake_irq);
disable_irq_wake(data->oob_wake_irq);
}
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
err = btusb_submit_intr_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
goto failed;
}
}
if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
goto failed;
}
btusb_submit_bulk_urb(hdev, GFP_NOIO);
}
if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
else
btusb_submit_isoc_urb(hdev, GFP_NOIO);
}
spin_lock_irq(&data->txlock);
play_deferred(data);
clear_bit(BTUSB_SUSPENDING, &data->flags);
spin_unlock_irq(&data->txlock);
schedule_work(&data->work);
return 0;
failed:
usb_scuttle_anchored_urbs(&data->deferred);
done:
spin_lock_irq(&data->txlock);
clear_bit(BTUSB_SUSPENDING, &data->flags);
spin_unlock_irq(&data->txlock);
return err;
}
#endif
static struct usb_driver btusb_driver = {
.name = "btusb",
.probe = btusb_probe,
.disconnect = btusb_disconnect,
#ifdef CONFIG_PM
.suspend = btusb_suspend,
.resume = btusb_resume,
#endif
.id_table = btusb_table,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(btusb_driver);
module_param(disable_scofix, bool, 0644);
MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
module_param(force_scofix, bool, 0644);
MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
module_param(enable_autosuspend, bool, 0644);
MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default");
module_param(reset, bool, 0644);
MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");