forked from Minki/linux
0ca06a00e2
AC97 Codec,PCI drivers I've made the review changes and as requested I've pasted the RFC by Nicolas below:- 'I would like to know what people think of the following patch. It allows for a codec on an AC97 bus to be shared with other drivers which are completely unrelated to audio. It registers a new bus type, and whenever a codec instance is created then a device for it is also registered with the driver model using that bus type. This allows, for example, to use the extra features of the UCB1400 like the touchscreen interface and the additional GPIOs and ADCs available on that chip for battery monitoring. I have a working UCB1400 touchscreen driver here that simply registers with the driver model happily working alongside with audio features using this.' Changes over RFC:- o Now matches codec name within codec group. o Added ac97_dev_release() to stop kernel complaining about no release method for device. o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config SND_AC97_CODEC' out with the PCI=n statement. o module is now called snd-ac97-bus Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
546 lines
15 KiB
Plaintext
546 lines
15 KiB
Plaintext
# ALSA PCI drivers
|
|
|
|
config SND_AC97_CODEC
|
|
tristate
|
|
select SND_PCM
|
|
select SND_AC97_BUS
|
|
|
|
config SND_AC97_BUS
|
|
tristate
|
|
|
|
menu "PCI devices"
|
|
depends on SND!=n && PCI
|
|
|
|
config SND_ALI5451
|
|
tristate "ALi M5451 PCI Audio Controller"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards using the ALi M5451 Audio Controller
|
|
(M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets
|
|
use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ali5451.
|
|
|
|
config SND_ATIIXP
|
|
tristate "ATI IXP AC97 Controller"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards with ATI chipsets (ATI IXP 150/200/250/
|
|
300/400).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-atiixp.
|
|
|
|
config SND_ATIIXP_MODEM
|
|
tristate "ATI IXP Modem"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated MC97 modem on
|
|
motherboards with ATI chipsets (ATI IXP 150/200/250).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-atiixp-modem.
|
|
|
|
config SND_AU8810
|
|
tristate "Aureal Advantage"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Aureal Advantage soundcards.
|
|
|
|
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
|
|
3D support code is in place, but not yet useable. For more info,
|
|
email the ALSA developer list, or <mjander@users.sourceforge.net>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-au8810.
|
|
|
|
config SND_AU8820
|
|
tristate "Aureal Vortex"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Aureal Vortex soundcards.
|
|
|
|
Supported features: Hardware Mixer and SRC. For more info, email
|
|
the ALSA developer list, or <mjander@users.sourceforge.net>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-au8820.
|
|
|
|
config SND_AU8830
|
|
tristate "Aureal Vortex 2"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Aureal Vortex 2 soundcards.
|
|
|
|
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
|
|
3D support code is in place, but not yet useable. For more info,
|
|
email the ALSA developer list, or <mjander@users.sourceforge.net>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-au8830.
|
|
|
|
config SND_AZT3328
|
|
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
|
|
depends on SND && EXPERIMENTAL
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Aztech AZF3328 (PCI168)
|
|
soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-azt3328.
|
|
|
|
config SND_BT87X
|
|
tristate "Bt87x Audio Capture"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
If you want to record audio from TV cards based on
|
|
Brooktree Bt878/Bt879 chips, say Y here and read
|
|
<file:Documentation/sound/alsa/Bt87x.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bt87x.
|
|
|
|
config SND_BT87X_OVERCLOCK
|
|
bool "Bt87x Audio overclocking"
|
|
depends on SND_BT87X
|
|
help
|
|
Say Y here if 448000 Hz isn't enough for you and you want to
|
|
record from the analog input with up to 1792000 Hz.
|
|
|
|
Higher sample rates won't hurt your hardware, but audio
|
|
quality may suffer.
|
|
|
|
config SND_CS46XX
|
|
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
|
|
depends on SND
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Cirrus Logic CS4610/CS4612/
|
|
CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cs46xx.
|
|
|
|
config SND_CS46XX_NEW_DSP
|
|
bool "Cirrus Logic (Sound Fusion) New DSP support (EXPERIMENTAL)"
|
|
depends on SND_CS46XX && EXPERIMENTAL
|
|
help
|
|
Say Y here to use a new DSP image for SPDIF and dual codecs.
|
|
|
|
This works better than the old code, so say Y.
|
|
|
|
config SND_CS4281
|
|
tristate "Cirrus Logic (Sound Fusion) CS4281"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Cirrus Logic CS4281 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cs4281.
|
|
|
|
config SND_EMU10K1
|
|
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y to include support for Sound Blaster PCI 512, Live!,
|
|
Audigy and E-mu APS (partially supported) soundcards.
|
|
|
|
The confusing multitude of mixer controls is documented in
|
|
<file:Documentation/sound/alsa/SB-Live-mixer.txt> and
|
|
<file:Documentation/sound/alsa/Audigy-mixer.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-emu10k1.
|
|
|
|
config SND_EMU10K1X
|
|
tristate "Emu10k1X (Dell OEM Version)"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
select SND_RAWMIDI
|
|
help
|
|
Say Y here to include support for the Dell OEM version of the
|
|
Sound Blaster Live!.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-emu10k1x.
|
|
|
|
config SND_CA0106
|
|
tristate "SB Audigy LS / Live 24bit"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the Sound Blaster Audigy LS
|
|
and Live 24bit.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ca0106.
|
|
|
|
config SND_KORG1212
|
|
tristate "Korg 1212 IO"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Korg 1212IO soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-korg1212.
|
|
|
|
config SND_MIXART
|
|
tristate "Digigram miXart"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_PCM
|
|
help
|
|
If you want to use Digigram miXart soundcards, say Y here and
|
|
read <file:Documentation/sound/alsa/MIXART.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-mixart.
|
|
|
|
config SND_NM256
|
|
tristate "NeoMagic NM256AV/ZX"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for NeoMagic NM256AV/ZX chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-nm256.
|
|
|
|
config SND_RME32
|
|
tristate "RME Digi32, 32/8, 32 PRO"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y to include support for RME Digi32, Digi32 PRO and
|
|
Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
|
|
devices.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-rme32.
|
|
|
|
config SND_RME96
|
|
tristate "RME Digi96, 96/8, 96/8 PRO"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Digi96, Digi96/8 and
|
|
Digi96/8 PRO/PAD/PST soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-rme96.
|
|
|
|
config SND_RME9652
|
|
tristate "RME Digi9652 (Hammerfall)"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Hammerfall (RME
|
|
Digi9652/Digi9636) soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-rme9652.
|
|
|
|
config SND_HDSP
|
|
tristate "RME Hammerfall DSP Audio"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Hammerfall DSP Audio
|
|
soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hdsp.
|
|
|
|
config SND_HDSPM
|
|
tristate "RME Hammerfall DSP MADI"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Hammerfall DSP MADI
|
|
soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hdspm.
|
|
|
|
config SND_TRIDENT
|
|
tristate "Trident 4D-Wave DX/NX; SiS 7018"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on Trident
|
|
4D-Wave DX/NX or SiS 7018 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-trident.
|
|
|
|
config SND_YMFPCI
|
|
tristate "Yamaha YMF724/740/744/754"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Yamaha PCI audio chips -
|
|
YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ymfpci.
|
|
|
|
config SND_ALS4000
|
|
tristate "Avance Logic ALS4000"
|
|
depends on SND && ISA_DMA_API
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for soundcards based on Avance Logic
|
|
ALS4000 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-als4000.
|
|
|
|
config SND_CMIPCI
|
|
tristate "C-Media 8738, 8338"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_PCM
|
|
help
|
|
If you want to use soundcards based on C-Media CMI8338 or CMI8738
|
|
chips, say Y here and read
|
|
<file:Documentation/sound/alsa/CMIPCI.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cmipci.
|
|
|
|
config SND_ENS1370
|
|
tristate "(Creative) Ensoniq AudioPCI 1370"
|
|
depends on SND
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ens1370.
|
|
|
|
config SND_ENS1371
|
|
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
|
|
depends on SND
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Ensoniq AudioPCI ES1371 chips and
|
|
Sound Blaster PCI 64 or 128 soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ens1371.
|
|
|
|
config SND_ES1938
|
|
tristate "ESS ES1938/1946/1969 (Solo-1)"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on ESS Solo-1
|
|
(ES1938, ES1946, ES1969) chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-es1938.
|
|
|
|
config SND_ES1968
|
|
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on ESS Maestro
|
|
1/2/2E chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-es1968.
|
|
|
|
config SND_MAESTRO3
|
|
tristate "ESS Allegro/Maestro3"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on ESS Maestro 3
|
|
(Allegro) chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-maestro3.
|
|
|
|
config SND_FM801
|
|
tristate "ForteMedia FM801"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on the ForteMedia
|
|
FM801 chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fm801.
|
|
|
|
config SND_FM801_TEA575X
|
|
tristate "ForteMedia FM801 + TEA5757 tuner"
|
|
depends on SND_FM801
|
|
select VIDEO_DEV
|
|
help
|
|
Say Y here to include support for soundcards based on the ForteMedia
|
|
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
|
|
Forte SF256-PCS-02).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fm801-tea575x.
|
|
|
|
config SND_ICE1712
|
|
tristate "ICEnsemble ICE1712 (Envy24)"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on the
|
|
ICE1712 (Envy24) chip.
|
|
|
|
Currently supported hardware is: M-Audio Delta 1010(LT),
|
|
DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
|
|
TerraTec EWX 24/96, EWS 88MT, 88D, DMX 6Fire, Phase 88;
|
|
Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ice1712.
|
|
|
|
config SND_ICE1724
|
|
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on
|
|
ICE/VT1724/1720 (Envy24HT/PT) chips.
|
|
|
|
Currently supported hardware is: AMP AUDIO2000; M-Audio
|
|
Revolution 7.1; TerraTec Aureon 5.1 Sky, 7.1 Space/Universe;
|
|
AudioTrak Prodigy 7.1; Pontis MS300; Albatron K8X800 Pro II;
|
|
Chaintech ZNF3-150/250.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ice1724.
|
|
|
|
config SND_INTEL8X0
|
|
tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards with Intel/SiS/nVidia/AMD chipsets, or
|
|
ALi chipsets using the M5455 Audio Controller. (There is a
|
|
separate driver for ALi M5451 Audio Controllers.)
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-intel8x0.
|
|
|
|
config SND_INTEL8X0M
|
|
tristate "Intel/SiS/nVidia/AMD MC97 Modem (EXPERIMENTAL)"
|
|
depends on SND && EXPERIMENTAL
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated MC97 modem on
|
|
motherboards with Intel/SiS/nVidia/AMD chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-intel8x0m.
|
|
|
|
config SND_SONICVIBES
|
|
tristate "S3 SonicVibes"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on the S3
|
|
SonicVibes chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-sonicvibes.
|
|
|
|
config SND_VIA82XX
|
|
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards with VIA chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-via82xx.
|
|
|
|
config SND_VIA82XX_MODEM
|
|
tristate "VIA 82C686A/B, 8233 based Modems"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated MC97 modem on
|
|
motherboards with VIA chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-via82xx-modem.
|
|
|
|
config SND_VX222
|
|
tristate "Digigram VX222"
|
|
depends on SND
|
|
select SND_VX_LIB
|
|
help
|
|
Say Y here to include support for Digigram VX222 soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-vx222.
|
|
|
|
config SND_HDA_INTEL
|
|
tristate "Intel HD Audio"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Intel "High Definition
|
|
Audio" (Azalia) motherboard devices.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hda-intel.
|
|
|
|
endmenu
|