linux/drivers/usb/host/ehci-mv.c
Greg Kroah-Hartman 64dc9e2e73 usb: patches for v3.10 merge window
Here is the big Gadget & PHY pull request. Many of us have
 been really busy lately getting multiple drivers to a better
 position.
 
 Since this pull request is so large, I will divide it in sections
 so it's easier to grasp what's included.
 
 - cleanups:
 	. UDC drivers no longer touch gadget->dev, that's now udc-core
 		responsibility
 	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
 	. UDC drivers no longer initialize DMA-related fields from gadget's
 		device structure
 	. UDC drivers don't touch gadget.dev.driver directly
 	. UDC drivers don't assign gadget.dev.release directly
 	. Removal of some unused DMA_ADDR_INVALID
 	. Introduction of CONFIG_USB_PHY
 	. All phy drivers have been moved to drivers/usb/phy and renamed to
 		a common naming scheme
 	. Fix PHY layer so it never returns a NULL pointer, also fix all
 		callers to avoid using IS_ERR_OR_NULL()
 	. Sparse fixes all over the place
 	. drivers/usb/otg/ has been deleted
 	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
 		usage
 
 - new features:
 	. UDC core now provides a generic way for tracking and reporting
 		UDC's state (not attached, resuming, suspended, addressed,
 		default, etc)
 	. twl4030-usb learned that it shouldn't be enabled during init
 	. Full DT support for DWC3 has been implemented
 	. ab8500-usb learned about pinctrl framework
 	. nop PHY learned about DeviceTree and regulators
 	. DWC3 learned about suspend/resume
 	. DWC3 can now be compiled in host-only and gadget-only (as well as
 		DRD) configurations
 	. UVC now enables streaming endpoint based on negotiated speed
 	. isp1301 now implements the PHY API properly
 	. configfs-based interface for gadget drivers which will lead to
 		the removal of all code which just combines functions together
 		to build functional gadget drivers.
 	. f_serial and f_obex were converted to new configfs interface while
 		maintaining old interface around.
 
 - non-critical fixes:
 	. UVC gadget driver got fixes for Endpoint usage and stream calculation
 	. ab8500-usb fixed unbalanced clock and regulator API usage
 	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
 	. fusb300_udc got a fix for DMA usage
 	. UVC got fixes for two assertions of the USB Video Class Compliance
 		specification revision 1.1
 	. build warning issues caused by recent addition of __must_check to
 		regulator API
 
 These are all changes which deserve a mention, all other changes are related
 to these one or minor spelling fixes and other similar tasks.
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRXG8GAAoJEIaOsuA1yqREJzYQAKMLW3J/TKTWS1DDuf7qMtMz
 Ug6qChKZXgT1/QrNjsq2tx4jYIkNdSMtRKiUx0BnIptlUx6gM22gcsN8mXX/UJjC
 FYAiWl+tYe85e9uayqqt+qVCZjTZCc7St4wQalugDHefvA7yCbiZpSaJRGlJMK+x
 mePJ7MfrulDsYBXr0u+m2LOJ0qxMDi40k3/UN3aUu5yzrmBiRpVq1mySruvLwGFp
 Pr6vBnprEc6bW5sRdUR4SICKLvLk5sHwHpvpkzDLYBIb/jXQwbfQri/HKeh4VMk8
 trbsvHZyB7H8uuFsCHiBc6VtjcbZ4mxPUK+1PCq8hG077avdkm3ox0BERk9aRTeC
 jg4mdpyWjgovwi882woPEQXNZoaAXpVDyI8tBRx92a+rGJjXSHhLQI+4Ffi4ZvzV
 d+q1ZzrHxuzwa/BwcPETY76umXQqXWXg+ap1bHDY0RZFoPLdXMpl583NXGSn3gOD
 dUlD0UlgYwb75333tRIPNQn3qOx0HVd6MlYPMNzl9t9c9qqfX78AYRny6ZucupRg
 t9VZ6FO3D2yre9W7u3U3q2c9H7uSAKr/8xaNfvdsIWPncgvvYVIyE8MnR7AiHoPv
 ZYESs/Gs6w9vUsHa9K4J16Ape7D3AMcGpXUoPUxTBHrwBexzt4j27VWtcL4ns/9r
 0kcltUJ4Zq+PIjc7xgxe
 =aF4r
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-04-05 15:18:00 -07:00

342 lines
7.6 KiB
C

/*
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
* Author: Chao Xie <chao.xie@marvell.com>
* Neil Zhang <zhangwm@marvell.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/usb/otg.h>
#include <linux/platform_data/mv_usb.h>
#define CAPLENGTH_MASK (0xff)
struct ehci_hcd_mv {
struct usb_hcd *hcd;
/* Which mode does this ehci running OTG/Host ? */
int mode;
void __iomem *phy_regs;
void __iomem *cap_regs;
void __iomem *op_regs;
struct usb_phy *otg;
struct mv_usb_platform_data *pdata;
struct clk *clk;
};
static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
{
clk_prepare_enable(ehci_mv->clk);
}
static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
{
clk_disable_unprepare(ehci_mv->clk);
}
static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
{
int retval;
ehci_clock_enable(ehci_mv);
if (ehci_mv->pdata->phy_init) {
retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
if (retval)
return retval;
}
return 0;
}
static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
{
if (ehci_mv->pdata->phy_deinit)
ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
ehci_clock_disable(ehci_mv);
}
static int mv_ehci_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct ehci_hcd_mv *ehci_mv = dev_get_drvdata(dev);
int retval;
if (ehci_mv == NULL) {
dev_err(dev, "Can not find private ehci data\n");
return -ENODEV;
}
hcd->has_tt = 1;
retval = ehci_setup(hcd);
if (retval)
dev_err(dev, "ehci_setup failed %d\n", retval);
return retval;
}
static const struct hc_driver mv_ehci_hc_driver = {
.description = hcd_name,
.product_desc = "Marvell EHCI",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
/*
* basic lifecycle operations
*/
.reset = mv_ehci_reset,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
};
static int mv_ehci_probe(struct platform_device *pdev)
{
struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct ehci_hcd_mv *ehci_mv;
struct resource *r;
int retval = -ENODEV;
u32 offset;
if (!pdata) {
dev_err(&pdev->dev, "missing platform_data\n");
return -ENODEV;
}
if (usb_disabled())
return -ENODEV;
hcd = usb_create_hcd(&mv_ehci_hc_driver, &pdev->dev, "mv ehci");
if (!hcd)
return -ENOMEM;
ehci_mv = devm_kzalloc(&pdev->dev, sizeof(*ehci_mv), GFP_KERNEL);
if (ehci_mv == NULL) {
dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
retval = -ENOMEM;
goto err_put_hcd;
}
platform_set_drvdata(pdev, ehci_mv);
ehci_mv->pdata = pdata;
ehci_mv->hcd = hcd;
ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(ehci_mv->clk)) {
dev_err(&pdev->dev, "error getting clock\n");
retval = PTR_ERR(ehci_mv->clk);
goto err_clear_drvdata;
}
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
if (r == NULL) {
dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
retval = -ENODEV;
goto err_clear_drvdata;
}
ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start,
resource_size(r));
if (ehci_mv->phy_regs == 0) {
dev_err(&pdev->dev, "failed to map phy I/O memory\n");
retval = -EFAULT;
goto err_clear_drvdata;
}
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
if (!r) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
goto err_clear_drvdata;
}
ehci_mv->cap_regs = devm_ioremap(&pdev->dev, r->start,
resource_size(r));
if (ehci_mv->cap_regs == NULL) {
dev_err(&pdev->dev, "failed to map I/O memory\n");
retval = -EFAULT;
goto err_clear_drvdata;
}
retval = mv_ehci_enable(ehci_mv);
if (retval) {
dev_err(&pdev->dev, "init phy error %d\n", retval);
goto err_clear_drvdata;
}
offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
ehci_mv->op_regs =
(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);
hcd->rsrc_start = r->start;
hcd->rsrc_len = resource_size(r);
hcd->regs = ehci_mv->op_regs;
hcd->irq = platform_get_irq(pdev, 0);
if (!hcd->irq) {
dev_err(&pdev->dev, "Cannot get irq.");
retval = -ENODEV;
goto err_disable_clk;
}
ehci = hcd_to_ehci(hcd);
ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
ehci_mv->mode = pdata->mode;
if (ehci_mv->mode == MV_USB_MODE_OTG) {
ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(ehci_mv->otg)) {
retval = PTR_ERR(ehci_mv->otg);
if (retval == -ENXIO)
dev_info(&pdev->dev, "MV_USB_MODE_OTG "
"must have CONFIG_USB_PHY enabled\n");
else
dev_err(&pdev->dev,
"unable to find transceiver\n");
goto err_disable_clk;
}
retval = otg_set_host(ehci_mv->otg->otg, &hcd->self);
if (retval < 0) {
dev_err(&pdev->dev,
"unable to register with transceiver\n");
retval = -ENODEV;
goto err_disable_clk;
}
/* otg will enable clock before use as host */
mv_ehci_disable(ehci_mv);
} else {
if (pdata->set_vbus)
pdata->set_vbus(1);
retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
if (retval) {
dev_err(&pdev->dev,
"failed to add hcd with err %d\n", retval);
goto err_set_vbus;
}
}
if (pdata->private_init)
pdata->private_init(ehci_mv->op_regs, ehci_mv->phy_regs);
dev_info(&pdev->dev,
"successful find EHCI device with regs 0x%p irq %d"
" working in %s mode\n", hcd->regs, hcd->irq,
ehci_mv->mode == MV_USB_MODE_OTG ? "OTG" : "Host");
return 0;
err_set_vbus:
if (pdata->set_vbus)
pdata->set_vbus(0);
err_disable_clk:
mv_ehci_disable(ehci_mv);
err_clear_drvdata:
platform_set_drvdata(pdev, NULL);
err_put_hcd:
usb_put_hcd(hcd);
return retval;
}
static int mv_ehci_remove(struct platform_device *pdev)
{
struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = ehci_mv->hcd;
if (hcd->rh_registered)
usb_remove_hcd(hcd);
if (!IS_ERR_OR_NULL(ehci_mv->otg))
otg_set_host(ehci_mv->otg->otg, NULL);
if (ehci_mv->mode == MV_USB_MODE_HOST) {
if (ehci_mv->pdata->set_vbus)
ehci_mv->pdata->set_vbus(0);
mv_ehci_disable(ehci_mv);
}
platform_set_drvdata(pdev, NULL);
usb_put_hcd(hcd);
return 0;
}
MODULE_ALIAS("mv-ehci");
static const struct platform_device_id ehci_id_table[] = {
{"pxa-u2oehci", PXA_U2OEHCI},
{"pxa-sph", PXA_SPH},
{"mmp3-hsic", MMP3_HSIC},
{"mmp3-fsic", MMP3_FSIC},
{},
};
static void mv_ehci_shutdown(struct platform_device *pdev)
{
struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = ehci_mv->hcd;
if (!hcd->rh_registered)
return;
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
static struct platform_driver ehci_mv_driver = {
.probe = mv_ehci_probe,
.remove = mv_ehci_remove,
.shutdown = mv_ehci_shutdown,
.driver = {
.name = "mv-ehci",
.bus = &platform_bus_type,
},
.id_table = ehci_id_table,
};