linux/drivers/net/wireless/ath/ath10k
Wen Gong 3ed39f8e74 ath10k: destroy sdio workqueue while remove sdio module
The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-28 22:12:59 +03:00
..
ahb.c ath10k: initialise struct ath10k_bus params to zero 2019-04-23 16:23:54 +03:00
ahb.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
bmi.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
bmi.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
ce.c ath10k: perform crash dump collection in workqueue 2019-04-29 17:24:37 +03:00
ce.h ath10k: fix descriptor size in ce tx completion for WCN3990 2019-02-26 14:56:19 +02:00
core.c ath10k: add new hw_ops for sdio chip 2019-06-27 20:58:48 +03:00
core.h ath10k: Add WMI diag fw logging support for WCN3990 2019-06-25 16:16:54 +03:00
coredump.c Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git 2019-05-27 15:15:29 +03:00
coredump.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
debug.c ath10k: Add wrapper function to ath10k debug 2019-06-25 15:48:47 +03:00
debug.h ath10k: add support for controlling tx power to a station 2019-06-25 16:14:00 +03:00
debugfs_sta.c ath10k: Check tx_stats before use it 2019-05-07 17:03:47 +03:00
hif.h ath10k: Add WMI diag fw logging support for WCN3990 2019-06-25 16:16:54 +03:00
htc.c ath10k: add initialization of HTC header 2019-04-23 16:26:09 +03:00
htc.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
htt_rx.c ath10k: Move non-fatal warn logs to dbg level for SDIO chip 2019-06-28 22:11:54 +03:00
htt_tx.c ath10k: add htt_h2t_aggr_cfg_msg op for high latency devices 2019-06-25 15:47:24 +03:00
htt.c ath10k: add inline wrapper for htt_h2t_aggr_cfg_msg 2019-06-25 15:47:15 +03:00
htt.h ath10k: add inline wrapper for htt_h2t_aggr_cfg_msg 2019-06-25 15:47:15 +03:00
hw.c ath10k: add new hw_ops for sdio chip 2019-06-27 20:58:48 +03:00
hw.h ath10k: add new hw_ops for sdio chip 2019-06-27 20:58:48 +03:00
Kconfig treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
mac.c ath10k: add support for controlling tx power to a station 2019-06-25 16:14:00 +03:00
mac.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
Makefile ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
p2p.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
p2p.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
pci.c ath10k: fix fw crash by moving chip reset after napi disabled 2019-06-25 15:59:25 +03:00
pci.h ath10k: perform crash dump collection in workqueue 2019-04-29 17:24:37 +03:00
qmi_wlfw_v01.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
qmi_wlfw_v01.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
qmi.c ath10k: Fix memory leak in qmi 2019-06-28 22:09:11 +03:00
qmi.h ath10k: Add WMI diag fw logging support for WCN3990 2019-06-25 16:16:54 +03:00
rx_desc.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
sdio.c ath10k: destroy sdio workqueue while remove sdio module 2019-06-28 22:12:59 +03:00
sdio.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
snoc.c ath10k: Add WMI diag fw logging support for WCN3990 2019-06-25 16:16:54 +03:00
snoc.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
spectral.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
spectral.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
swap.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
swap.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
targaddrs.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
testmode_i.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
testmode.c ath10k: change firmware file name for UTF mode of SDIO/USB 2019-06-25 15:53:41 +03:00
testmode.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
thermal.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
thermal.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
trace.c ath10k: Add wrapper function to ath10k debug 2019-06-25 15:48:47 +03:00
trace.h ath10k: Add wrapper function to ath10k debug 2019-06-25 15:48:47 +03:00
txrx.c ath10k: add peer id check in ath10k_peer_find_by_id 2019-05-07 17:02:26 +03:00
txrx.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
usb.c ath10k: Change the warning message string 2019-06-25 16:00:12 +03:00
usb.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
wmi-ops.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
wmi-tlv.c ath10k: Add peer delete response event 2019-06-25 16:12:24 +03:00
wmi-tlv.h ath10k: Add peer delete response event 2019-06-25 16:12:24 +03:00
wmi.c ath10k: rx_duration update for fw_stats debugfs entry 2019-05-07 16:44:13 +03:00
wmi.h ath10k: add support for controlling tx power to a station 2019-06-25 16:14:00 +03:00
wow.c ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00
wow.h ath10k: switch to use SPDX license identifiers 2019-02-20 10:33:00 +02:00