forked from Minki/linux
10724cc7bb
There are two flow control mechanisms in TIPC; one at link level that handles network congestion, burst control, and retransmission, and one at connection level which' only remaining task is to prevent overflow in the receiving socket buffer. In TIPC, the latter task has to be solved end-to-end because messages can not be thrown away once they have been accepted and delivered upwards from the link layer, i.e, we can never permit the receive buffer to overflow. Currently, this algorithm is message based. A counter in the receiving socket keeps track of number of consumed messages, and sends a dedicated acknowledge message back to the sender for each 256 consumed message. A counter at the sending end keeps track of the sent, not yet acknowledged messages, and blocks the sender if this number ever reaches 512 unacknowledged messages. When the missing acknowledge arrives, the socket is then woken up for renewed transmission. This works well for keeping the message flow running, as it almost never happens that a sender socket is blocked this way. A problem with the current mechanism is that it potentially is very memory consuming. Since we don't distinguish between small and large messages, we have to dimension the socket receive buffer according to a worst-case of both. I.e., the window size must be chosen large enough to sustain a reasonable throughput even for the smallest messages, while we must still consider a scenario where all messages are of maximum size. Hence, the current fix window size of 512 messages and a maximum message size of 66k results in a receive buffer of 66 MB when truesize(66k) = 131k is taken into account. It is possible to do much better. This commit introduces an algorithm where we instead use 1024-byte blocks as base unit. This unit, always rounded upwards from the actual message size, is used when we advertise windows as well as when we count and acknowledge transmitted data. The advertised window is based on the configured receive buffer size in such a way that even the worst-case truesize/msgsize ratio always is covered. Since the smallest possible message size (from a flow control viewpoint) now is 1024 bytes, we can safely assume this ratio to be less than four, which is the value we are now using. This way, we have been able to reduce the default receive buffer size from 66 MB to 2 MB with maintained performance. In order to keep this solution backwards compatible, we introduce a new capability bit in the discovery protocol, and use this throughout the message sending/reception path to always select the right unit. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
82 lines
3.6 KiB
C
82 lines
3.6 KiB
C
/*
|
|
* net/tipc/node.h: Include file for TIPC node management routines
|
|
*
|
|
* Copyright (c) 2000-2006, 2014-2015, Ericsson AB
|
|
* Copyright (c) 2005, 2010-2014, Wind River Systems
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the names of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _TIPC_NODE_H
|
|
#define _TIPC_NODE_H
|
|
|
|
#include "addr.h"
|
|
#include "net.h"
|
|
#include "bearer.h"
|
|
#include "msg.h"
|
|
|
|
/* Optional capabilities supported by this code version
|
|
*/
|
|
enum {
|
|
TIPC_BCAST_SYNCH = (1 << 1),
|
|
TIPC_BLOCK_FLOWCTL = (2 << 1)
|
|
};
|
|
|
|
#define TIPC_NODE_CAPABILITIES (TIPC_BCAST_SYNCH | TIPC_BLOCK_FLOWCTL)
|
|
#define INVALID_BEARER_ID -1
|
|
|
|
void tipc_node_stop(struct net *net);
|
|
void tipc_node_check_dest(struct net *net, u32 onode,
|
|
struct tipc_bearer *bearer,
|
|
u16 capabilities, u32 signature,
|
|
struct tipc_media_addr *maddr,
|
|
bool *respond, bool *dupl_addr);
|
|
void tipc_node_delete_links(struct net *net, int bearer_id);
|
|
int tipc_node_get_linkname(struct net *net, u32 bearer_id, u32 node,
|
|
char *linkname, size_t len);
|
|
int tipc_node_xmit(struct net *net, struct sk_buff_head *list, u32 dnode,
|
|
int selector);
|
|
int tipc_node_xmit_skb(struct net *net, struct sk_buff *skb, u32 dest,
|
|
u32 selector);
|
|
void tipc_node_subscribe(struct net *net, struct list_head *subscr, u32 addr);
|
|
void tipc_node_unsubscribe(struct net *net, struct list_head *subscr, u32 addr);
|
|
void tipc_node_broadcast(struct net *net, struct sk_buff *skb);
|
|
int tipc_node_add_conn(struct net *net, u32 dnode, u32 port, u32 peer_port);
|
|
void tipc_node_remove_conn(struct net *net, u32 dnode, u32 port);
|
|
int tipc_node_get_mtu(struct net *net, u32 addr, u32 sel);
|
|
u16 tipc_node_get_capabilities(struct net *net, u32 addr);
|
|
int tipc_nl_node_dump(struct sk_buff *skb, struct netlink_callback *cb);
|
|
int tipc_nl_node_dump_link(struct sk_buff *skb, struct netlink_callback *cb);
|
|
int tipc_nl_node_reset_link_stats(struct sk_buff *skb, struct genl_info *info);
|
|
int tipc_nl_node_get_link(struct sk_buff *skb, struct genl_info *info);
|
|
int tipc_nl_node_set_link(struct sk_buff *skb, struct genl_info *info);
|
|
|
|
#endif
|