forked from Minki/linux
e2c5eb78a3
The GPMC binding is obviously very confusing as the values are all over the place. People seem to confuse the GPMC partition size for the chip select, and the device IO size within the GPMC partition easily. The ranges entry contains the GPMC partition size. And the reg entry contains the size of the IO registers of the device connected to the GPMC. Let's fix the issue according to the following table: Device GPMC partition size Device IO size connected in the ranges entry in the reg entry NAND 0x01000000 (16MB) 4 16550 0x01000000 (16MB) 8 smc91x 0x01000000 (16MB) 0xf smc911x 0x01000000 (16MB) 0xff OneNAND 0x01000000 (16MB) 0x20000 (128KB) 16MB NOR 0x01000000 (16MB) 0x01000000 (16MB) 32MB NOR 0x02000000 (32MB) 0x02000000 (32MB) 64MB NOR 0x04000000 (64MB) 0x04000000 (64MB) 128MB NOR 0x08000000 (128MB) 0x08000000 (128MB) 256MB NOR 0x10000000 (256MB) 0x10000000 (256MB) Let's also add comments to the fixed entries while at it. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
194 lines
4.0 KiB
Plaintext
194 lines
4.0 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "omap34xx.dtsi"
|
|
|
|
/ {
|
|
model = "TI OMAP3430 SDP";
|
|
compatible = "ti,omap3430-sdp", "ti,omap3";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <2600000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
};
|
|
};
|
|
|
|
#include "twl4030.dtsi"
|
|
#include "twl4030_omap3.dtsi"
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&vmmc1>;
|
|
vmmc_aux-supply = <&vsim>;
|
|
/*
|
|
* S6-3 must be in ON position for 8 bit mode to function
|
|
* Else, use 4 bit mode
|
|
*/
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&mmc2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x10000000 0x08000000>,
|
|
<1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
|
|
<2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
|
|
|
|
nor@0,0 {
|
|
compatible = "cfi-flash";
|
|
linux,mtd-name= "intel,pf48f6000m0y1be";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0 0 0x08000000>;
|
|
bank-width = <2>;
|
|
|
|
gpmc,mux-add-data = <2>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <186>;
|
|
gpmc,cs-wr-off-ns = <186>;
|
|
gpmc,adv-on-ns = <12>;
|
|
gpmc,adv-rd-off-ns = <48>;
|
|
gpmc,adv-wr-off-ns = <48>;
|
|
gpmc,oe-on-ns = <54>;
|
|
gpmc,oe-off-ns = <168>;
|
|
gpmc,we-on-ns = <54>;
|
|
gpmc,we-off-ns = <168>;
|
|
gpmc,rd-cycle-ns = <186>;
|
|
gpmc,wr-cycle-ns = <186>;
|
|
gpmc,access-ns = <114>;
|
|
gpmc,page-burst-access-ns = <6>;
|
|
gpmc,bus-turnaround-ns = <12>;
|
|
gpmc,cycle2cycle-delay-ns = <18>;
|
|
gpmc,wr-data-mux-bus-ns = <90>;
|
|
gpmc,wr-access-ns = <186>;
|
|
gpmc,cycle2cycle-samecsen;
|
|
gpmc,cycle2cycle-diffcsen;
|
|
|
|
partition@0 {
|
|
label = "bootloader-nor";
|
|
reg = <0 0x40000>;
|
|
};
|
|
partition@40000 {
|
|
label = "params-nor";
|
|
reg = <0x40000 0x40000>;
|
|
};
|
|
partition@80000 {
|
|
label = "kernel-nor";
|
|
reg = <0x80000 0x200000>;
|
|
};
|
|
partition@280000 {
|
|
label = "filesystem-nor";
|
|
reg = <0x240000 0x7d80000>;
|
|
};
|
|
};
|
|
|
|
nand@1,0 {
|
|
linux,mtd-name= "micron,mt29f1g08abb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
|
|
ti,nand-ecc-opt = "sw";
|
|
nand-bus-width = <8>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <36>;
|
|
gpmc,cs-wr-off-ns = <36>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <24>;
|
|
gpmc,adv-wr-off-ns = <36>;
|
|
gpmc,oe-on-ns = <6>;
|
|
gpmc,oe-off-ns = <48>;
|
|
gpmc,we-on-ns = <6>;
|
|
gpmc,we-off-ns = <30>;
|
|
gpmc,rd-cycle-ns = <72>;
|
|
gpmc,wr-cycle-ns = <72>;
|
|
gpmc,access-ns = <54>;
|
|
gpmc,wr-access-ns = <30>;
|
|
|
|
partition@0 {
|
|
label = "xloader-nand";
|
|
reg = <0 0x80000>;
|
|
};
|
|
partition@80000 {
|
|
label = "bootloader-nand";
|
|
reg = <0x80000 0x140000>;
|
|
};
|
|
partition@1c0000 {
|
|
label = "params-nand";
|
|
reg = <0x1c0000 0xc0000>;
|
|
};
|
|
partition@280000 {
|
|
label = "kernel-nand";
|
|
reg = <0x280000 0x500000>;
|
|
};
|
|
partition@780000 {
|
|
label = "filesystem-nand";
|
|
reg = <0x780000 0x7880000>;
|
|
};
|
|
};
|
|
|
|
onenand@2,0 {
|
|
linux,mtd-name= "samsung,kfm2g16q2m-deb8";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */
|
|
|
|
gpmc,device-width = <2>;
|
|
gpmc,mux-add-data = <2>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <84>;
|
|
gpmc,cs-wr-off-ns = <72>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <18>;
|
|
gpmc,adv-wr-off-ns = <18>;
|
|
gpmc,oe-on-ns = <30>;
|
|
gpmc,oe-off-ns = <84>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <42>;
|
|
gpmc,rd-cycle-ns = <108>;
|
|
gpmc,wr-cycle-ns = <96>;
|
|
gpmc,access-ns = <78>;
|
|
gpmc,wr-data-mux-bus-ns = <30>;
|
|
|
|
partition@0 {
|
|
label = "xloader-onenand";
|
|
reg = <0 0x80000>;
|
|
};
|
|
partition@80000 {
|
|
label = "bootloader-onenand";
|
|
reg = <0x80000 0x40000>;
|
|
};
|
|
partition@c0000 {
|
|
label = "params-onenand";
|
|
reg = <0xc0000 0x20000>;
|
|
};
|
|
partition@e0000 {
|
|
label = "kernel-onenand";
|
|
reg = <0xe0000 0x200000>;
|
|
};
|
|
partition@2e0000 {
|
|
label = "filesystem-onenand";
|
|
reg = <0x2e0000 0xfd20000>;
|
|
};
|
|
};
|
|
};
|