forked from Minki/linux
8647f2bc01
Use the omap3-igep0030-common.dtsi file and remove repeated parts leaving the nodes that are not common between IGEP COM MODULE hardware revisions. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
71 lines
2.1 KiB
Plaintext
71 lines
2.1 KiB
Plaintext
/*
|
|
* Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
|
|
*
|
|
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
|
|
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "omap3-igep0030-common.dtsi"
|
|
|
|
/ {
|
|
model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
|
|
compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
|
|
|
|
/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
|
|
lbee1usjyc_pdn: lbee1usjyc_pdn {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "regulator-lbee1usjyc-pdn";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
|
|
startup-delay-us = <10000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
/* Regulator to trigger the RESET_N_W signal of the Wifi module */
|
|
lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "regulator-lbee1usjyc-reset-n-w";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
|
|
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
|
|
OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&leds_core2_pins>;
|
|
|
|
boot {
|
|
label = "omap3:green:boot";
|
|
gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
/* On board Wifi module */
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
|
|
vmmc-supply = <&lbee1usjyc_pdn>;
|
|
vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
};
|
|
|