forked from Minki/linux
5976000965
This ensures the core and the audio subsystem clocks are configured properly, as expected by the sound machine driver. These bits are missing to obtain proper audio sample rates in kernel v3.17, where audio support for Odroid X2/U3 was first added. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
407 lines
9.2 KiB
Plaintext
407 lines
9.2 KiB
Plaintext
/*
|
|
* Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
|
|
* device tree source
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "exynos4412.dtsi"
|
|
|
|
/ {
|
|
firmware@0204F000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0204F000 0x1000>;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_power_key>;
|
|
|
|
power_key {
|
|
interrupt-parent = <&gpx1>;
|
|
interrupts = <3 0>;
|
|
gpios = <&gpx1 3 1>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "power key";
|
|
debounce-interval = <10>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
pinctrl-0 = <&i2s0_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
clocks = <&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_DOUT_AUD_BUS>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "samsung,odroidx2-audio";
|
|
samsung,i2s-controller = <&i2s0>;
|
|
samsung,audio-codec = <&max98090>;
|
|
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
|
<&clock_audss EXYNOS_MOUT_I2S>,
|
|
<&clock_audss EXYNOS_DOUT_SRP>,
|
|
<&clock_audss EXYNOS_DOUT_AUD_BUS>;
|
|
assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
|
|
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
|
assigned-clock-rates = <0>,
|
|
<0>,
|
|
<192000000>,
|
|
<19200000>;
|
|
};
|
|
|
|
mmc@12550000 {
|
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&ldo20_reg &buck8_reg>;
|
|
status = "okay";
|
|
|
|
num-slots = <1>;
|
|
broken-cd;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
watchdog@10060000 {
|
|
status = "okay";
|
|
};
|
|
|
|
rtc@10070000 {
|
|
status = "okay";
|
|
};
|
|
|
|
g2d@10800000 {
|
|
status = "okay";
|
|
};
|
|
|
|
camera {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <>;
|
|
|
|
fimc_0: fimc@11800000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
|
|
<&clock CLK_SCLK_FIMC0>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
fimc_1: fimc@11810000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
|
|
<&clock CLK_SCLK_FIMC1>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
fimc_2: fimc@11820000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
|
|
<&clock CLK_SCLK_FIMC2>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
fimc_3: fimc@11830000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
|
|
<&clock CLK_SCLK_FIMC3>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
};
|
|
|
|
sdhci@12530000 {
|
|
bus-width = <4>;
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&ldo4_reg &ldo21_reg>;
|
|
cd-gpios = <&gpk2 2 0>;
|
|
cd-inverted;
|
|
status = "okay";
|
|
};
|
|
|
|
serial@13800000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@13810000 {
|
|
status = "okay";
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
xusbxti {
|
|
compatible = "samsung,clock-xusbxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
i2c@13860000 {
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
pinctrl-names = "default";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
status = "okay";
|
|
|
|
usb3503: usb3503@08 {
|
|
compatible = "smsc,usb3503";
|
|
reg = <0x08>;
|
|
|
|
intn-gpios = <&gpx3 0 0>;
|
|
connect-gpios = <&gpx3 4 0>;
|
|
reset-gpios = <&gpx3 5 0>;
|
|
initial-mode = <1>;
|
|
};
|
|
|
|
max77686: pmic@09 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max77686_irq>;
|
|
reg = <0x09>;
|
|
#clock-cells = <1>;
|
|
|
|
voltage-regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_M1_2_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDDQ_EXT_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDDQ_MMC2_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDDQ_MMC1_3_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD10_MPLL_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD10_XPLL_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD18_ABB1_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD33_USB_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDDQ_C2C_W_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD18_ABB0_2_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD10_HSIC_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD18_HSIC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "LDO20_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "LDO21_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "VDDQ_LCD_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-microvolt-offset = <50000>;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VDDQ_CKEM1_2_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "BUCK6_1.35V";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "BUCK7_2.0V";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "BUCK8_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@13870000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
status = "okay";
|
|
max98090: max98090@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <0 0>;
|
|
};
|
|
};
|
|
|
|
exynos-usbphy@125B0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
hsotg@12480000 {
|
|
status = "okay";
|
|
vusb_d-supply = <&ldo15_reg>;
|
|
vusb_a-supply = <&ldo12_reg>;
|
|
};
|
|
|
|
ehci: ehci@12580000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
gpio_power_key: power_key {
|
|
samsung,pins = "gpx1-3";
|
|
samsung,pin-pud = <0>;
|
|
};
|
|
|
|
max77686_irq: max77686-irq {
|
|
samsung,pins = "gpx3-2";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|