forked from Minki/linux
1547aba993
Some devices can usefully run audio while the Linux system is suspended. One of the most common examples is smartphone systems, which are normally designed to allow audio to be run between the baseband and the CODEC without passing through the CPU and so can suspend the CPU when on a voice call for additional power savings. Support such systems by providing an API snd_soc_dapm_ignore_suspend(). This can be used to mark DAPM endpoints as not being sensitive to system suspend. When the system is being suspended paths between endpoints which are marked as ignoring suspend will be kept active. Both source and sink must be marked, and there must already be an active path between the two endpoints prior to suspend. When paths are active over suspend the bias management will hold the device bias in the ON state. This is used to avoid suspending the CODEC while it is still in use. Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2217 lines
55 KiB
C
2217 lines
55 KiB
C
/*
|
|
* soc-dapm.c -- ALSA SoC Dynamic Audio Power Management
|
|
*
|
|
* Copyright 2005 Wolfson Microelectronics PLC.
|
|
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Features:
|
|
* o Changes power status of internal codec blocks depending on the
|
|
* dynamic configuration of codec internal audio paths and active
|
|
* DACs/ADCs.
|
|
* o Platform power domain - can support external components i.e. amps and
|
|
* mic/meadphone insertion events.
|
|
* o Automatic Mic Bias support
|
|
* o Jack insertion power event initiation - e.g. hp insertion will enable
|
|
* sinks, dacs, etc
|
|
* o Delayed powerdown of audio susbsystem to reduce pops between a quick
|
|
* device reopen.
|
|
*
|
|
* Todo:
|
|
* o DAPM power change sequencing - allow for configurable per
|
|
* codec sequences.
|
|
* o Support for analogue bias optimisation.
|
|
* o Support for reduced codec oversampling rates.
|
|
* o Support for reduced codec bias currents.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/debugfs.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
|
|
/* dapm power sequences - make this per codec in the future */
|
|
static int dapm_up_seq[] = {
|
|
[snd_soc_dapm_pre] = 0,
|
|
[snd_soc_dapm_supply] = 1,
|
|
[snd_soc_dapm_micbias] = 2,
|
|
[snd_soc_dapm_aif_in] = 3,
|
|
[snd_soc_dapm_aif_out] = 3,
|
|
[snd_soc_dapm_mic] = 4,
|
|
[snd_soc_dapm_mux] = 5,
|
|
[snd_soc_dapm_value_mux] = 5,
|
|
[snd_soc_dapm_dac] = 6,
|
|
[snd_soc_dapm_mixer] = 7,
|
|
[snd_soc_dapm_mixer_named_ctl] = 7,
|
|
[snd_soc_dapm_pga] = 8,
|
|
[snd_soc_dapm_adc] = 9,
|
|
[snd_soc_dapm_hp] = 10,
|
|
[snd_soc_dapm_spk] = 10,
|
|
[snd_soc_dapm_post] = 11,
|
|
};
|
|
|
|
static int dapm_down_seq[] = {
|
|
[snd_soc_dapm_pre] = 0,
|
|
[snd_soc_dapm_adc] = 1,
|
|
[snd_soc_dapm_hp] = 2,
|
|
[snd_soc_dapm_spk] = 2,
|
|
[snd_soc_dapm_pga] = 4,
|
|
[snd_soc_dapm_mixer_named_ctl] = 5,
|
|
[snd_soc_dapm_mixer] = 5,
|
|
[snd_soc_dapm_dac] = 6,
|
|
[snd_soc_dapm_mic] = 7,
|
|
[snd_soc_dapm_micbias] = 8,
|
|
[snd_soc_dapm_mux] = 9,
|
|
[snd_soc_dapm_value_mux] = 9,
|
|
[snd_soc_dapm_aif_in] = 10,
|
|
[snd_soc_dapm_aif_out] = 10,
|
|
[snd_soc_dapm_supply] = 11,
|
|
[snd_soc_dapm_post] = 12,
|
|
};
|
|
|
|
static void pop_wait(u32 pop_time)
|
|
{
|
|
if (pop_time)
|
|
schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time));
|
|
}
|
|
|
|
static void pop_dbg(u32 pop_time, const char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
|
|
va_start(args, fmt);
|
|
|
|
if (pop_time) {
|
|
vprintk(fmt, args);
|
|
}
|
|
|
|
va_end(args);
|
|
}
|
|
|
|
/* create a new dapm widget */
|
|
static inline struct snd_soc_dapm_widget *dapm_cnew_widget(
|
|
const struct snd_soc_dapm_widget *_widget)
|
|
{
|
|
return kmemdup(_widget, sizeof(*_widget), GFP_KERNEL);
|
|
}
|
|
|
|
/**
|
|
* snd_soc_dapm_set_bias_level - set the bias level for the system
|
|
* @socdev: audio device
|
|
* @level: level to configure
|
|
*
|
|
* Configure the bias (power) levels for the SoC audio device.
|
|
*
|
|
* Returns 0 for success else error.
|
|
*/
|
|
static int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct snd_soc_card *card = socdev->card;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
int ret = 0;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
dev_dbg(socdev->dev, "Setting full bias\n");
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
dev_dbg(socdev->dev, "Setting bias prepare\n");
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
dev_dbg(socdev->dev, "Setting standby bias\n");
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
dev_dbg(socdev->dev, "Setting bias off\n");
|
|
break;
|
|
default:
|
|
dev_err(socdev->dev, "Setting invalid bias %d\n", level);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (card->set_bias_level)
|
|
ret = card->set_bias_level(card, level);
|
|
if (ret == 0) {
|
|
if (codec->set_bias_level)
|
|
ret = codec->set_bias_level(codec, level);
|
|
else
|
|
codec->bias_level = level;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* set up initial codec paths */
|
|
static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
|
|
struct snd_soc_dapm_path *p, int i)
|
|
{
|
|
switch (w->id) {
|
|
case snd_soc_dapm_switch:
|
|
case snd_soc_dapm_mixer:
|
|
case snd_soc_dapm_mixer_named_ctl: {
|
|
int val;
|
|
struct soc_mixer_control *mc = (struct soc_mixer_control *)
|
|
w->kcontrols[i].private_value;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int shift = mc->shift;
|
|
int max = mc->max;
|
|
unsigned int mask = (1 << fls(max)) - 1;
|
|
unsigned int invert = mc->invert;
|
|
|
|
val = snd_soc_read(w->codec, reg);
|
|
val = (val >> shift) & mask;
|
|
|
|
if ((invert && !val) || (!invert && val))
|
|
p->connect = 1;
|
|
else
|
|
p->connect = 0;
|
|
}
|
|
break;
|
|
case snd_soc_dapm_mux: {
|
|
struct soc_enum *e = (struct soc_enum *)w->kcontrols[i].private_value;
|
|
int val, item, bitmask;
|
|
|
|
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
|
|
;
|
|
val = snd_soc_read(w->codec, e->reg);
|
|
item = (val >> e->shift_l) & (bitmask - 1);
|
|
|
|
p->connect = 0;
|
|
for (i = 0; i < e->max; i++) {
|
|
if (!(strcmp(p->name, e->texts[i])) && item == i)
|
|
p->connect = 1;
|
|
}
|
|
}
|
|
break;
|
|
case snd_soc_dapm_value_mux: {
|
|
struct soc_enum *e = (struct soc_enum *)
|
|
w->kcontrols[i].private_value;
|
|
int val, item;
|
|
|
|
val = snd_soc_read(w->codec, e->reg);
|
|
val = (val >> e->shift_l) & e->mask;
|
|
for (item = 0; item < e->max; item++) {
|
|
if (val == e->values[item])
|
|
break;
|
|
}
|
|
|
|
p->connect = 0;
|
|
for (i = 0; i < e->max; i++) {
|
|
if (!(strcmp(p->name, e->texts[i])) && item == i)
|
|
p->connect = 1;
|
|
}
|
|
}
|
|
break;
|
|
/* does not effect routing - always connected */
|
|
case snd_soc_dapm_pga:
|
|
case snd_soc_dapm_output:
|
|
case snd_soc_dapm_adc:
|
|
case snd_soc_dapm_input:
|
|
case snd_soc_dapm_dac:
|
|
case snd_soc_dapm_micbias:
|
|
case snd_soc_dapm_vmid:
|
|
case snd_soc_dapm_supply:
|
|
case snd_soc_dapm_aif_in:
|
|
case snd_soc_dapm_aif_out:
|
|
p->connect = 1;
|
|
break;
|
|
/* does effect routing - dynamically connected */
|
|
case snd_soc_dapm_hp:
|
|
case snd_soc_dapm_mic:
|
|
case snd_soc_dapm_spk:
|
|
case snd_soc_dapm_line:
|
|
case snd_soc_dapm_pre:
|
|
case snd_soc_dapm_post:
|
|
p->connect = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* connect mux widget to its interconnecting audio paths */
|
|
static int dapm_connect_mux(struct snd_soc_codec *codec,
|
|
struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
|
|
struct snd_soc_dapm_path *path, const char *control_name,
|
|
const struct snd_kcontrol_new *kcontrol)
|
|
{
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
int i;
|
|
|
|
for (i = 0; i < e->max; i++) {
|
|
if (!(strcmp(control_name, e->texts[i]))) {
|
|
list_add(&path->list, &codec->dapm_paths);
|
|
list_add(&path->list_sink, &dest->sources);
|
|
list_add(&path->list_source, &src->sinks);
|
|
path->name = (char*)e->texts[i];
|
|
dapm_set_path_status(dest, path, 0);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* connect mixer widget to its interconnecting audio paths */
|
|
static int dapm_connect_mixer(struct snd_soc_codec *codec,
|
|
struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
|
|
struct snd_soc_dapm_path *path, const char *control_name)
|
|
{
|
|
int i;
|
|
|
|
/* search for mixer kcontrol */
|
|
for (i = 0; i < dest->num_kcontrols; i++) {
|
|
if (!strcmp(control_name, dest->kcontrols[i].name)) {
|
|
list_add(&path->list, &codec->dapm_paths);
|
|
list_add(&path->list_sink, &dest->sources);
|
|
list_add(&path->list_source, &src->sinks);
|
|
path->name = dest->kcontrols[i].name;
|
|
dapm_set_path_status(dest, path, i);
|
|
return 0;
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* update dapm codec register bits */
|
|
static int dapm_update_bits(struct snd_soc_dapm_widget *widget)
|
|
{
|
|
int change, power;
|
|
unsigned int old, new;
|
|
struct snd_soc_codec *codec = widget->codec;
|
|
|
|
/* check for valid widgets */
|
|
if (widget->reg < 0 || widget->id == snd_soc_dapm_input ||
|
|
widget->id == snd_soc_dapm_output ||
|
|
widget->id == snd_soc_dapm_hp ||
|
|
widget->id == snd_soc_dapm_mic ||
|
|
widget->id == snd_soc_dapm_line ||
|
|
widget->id == snd_soc_dapm_spk)
|
|
return 0;
|
|
|
|
power = widget->power;
|
|
if (widget->invert)
|
|
power = (power ? 0:1);
|
|
|
|
old = snd_soc_read(codec, widget->reg);
|
|
new = (old & ~(0x1 << widget->shift)) | (power << widget->shift);
|
|
|
|
change = old != new;
|
|
if (change) {
|
|
pop_dbg(codec->pop_time, "pop test %s : %s in %d ms\n",
|
|
widget->name, widget->power ? "on" : "off",
|
|
codec->pop_time);
|
|
pop_wait(codec->pop_time);
|
|
snd_soc_write(codec, widget->reg, new);
|
|
}
|
|
pr_debug("reg %x old %x new %x change %d\n", widget->reg,
|
|
old, new, change);
|
|
return change;
|
|
}
|
|
|
|
/* create new dapm mixer control */
|
|
static int dapm_new_mixer(struct snd_soc_codec *codec,
|
|
struct snd_soc_dapm_widget *w)
|
|
{
|
|
int i, ret = 0;
|
|
size_t name_len;
|
|
struct snd_soc_dapm_path *path;
|
|
|
|
/* add kcontrol */
|
|
for (i = 0; i < w->num_kcontrols; i++) {
|
|
|
|
/* match name */
|
|
list_for_each_entry(path, &w->sources, list_sink) {
|
|
|
|
/* mixer/mux paths name must match control name */
|
|
if (path->name != (char*)w->kcontrols[i].name)
|
|
continue;
|
|
|
|
/* add dapm control with long name.
|
|
* for dapm_mixer this is the concatenation of the
|
|
* mixer and kcontrol name.
|
|
* for dapm_mixer_named_ctl this is simply the
|
|
* kcontrol name.
|
|
*/
|
|
name_len = strlen(w->kcontrols[i].name) + 1;
|
|
if (w->id != snd_soc_dapm_mixer_named_ctl)
|
|
name_len += 1 + strlen(w->name);
|
|
|
|
path->long_name = kmalloc(name_len, GFP_KERNEL);
|
|
|
|
if (path->long_name == NULL)
|
|
return -ENOMEM;
|
|
|
|
switch (w->id) {
|
|
default:
|
|
snprintf(path->long_name, name_len, "%s %s",
|
|
w->name, w->kcontrols[i].name);
|
|
break;
|
|
case snd_soc_dapm_mixer_named_ctl:
|
|
snprintf(path->long_name, name_len, "%s",
|
|
w->kcontrols[i].name);
|
|
break;
|
|
}
|
|
|
|
path->long_name[name_len - 1] = '\0';
|
|
|
|
path->kcontrol = snd_soc_cnew(&w->kcontrols[i], w,
|
|
path->long_name);
|
|
ret = snd_ctl_add(codec->card, path->kcontrol);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n",
|
|
path->long_name,
|
|
ret);
|
|
kfree(path->long_name);
|
|
path->long_name = NULL;
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* create new dapm mux control */
|
|
static int dapm_new_mux(struct snd_soc_codec *codec,
|
|
struct snd_soc_dapm_widget *w)
|
|
{
|
|
struct snd_soc_dapm_path *path = NULL;
|
|
struct snd_kcontrol *kcontrol;
|
|
int ret = 0;
|
|
|
|
if (!w->num_kcontrols) {
|
|
printk(KERN_ERR "asoc: mux %s has no controls\n", w->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
kcontrol = snd_soc_cnew(&w->kcontrols[0], w, w->name);
|
|
ret = snd_ctl_add(codec->card, kcontrol);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
list_for_each_entry(path, &w->sources, list_sink)
|
|
path->kcontrol = kcontrol;
|
|
|
|
return ret;
|
|
|
|
err:
|
|
printk(KERN_ERR "asoc: failed to add kcontrol %s\n", w->name);
|
|
return ret;
|
|
}
|
|
|
|
/* create new dapm volume control */
|
|
static int dapm_new_pga(struct snd_soc_codec *codec,
|
|
struct snd_soc_dapm_widget *w)
|
|
{
|
|
if (w->num_kcontrols)
|
|
pr_err("asoc: PGA controls not supported: '%s'\n", w->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* reset 'walked' bit for each dapm path */
|
|
static inline void dapm_clear_walk(struct snd_soc_codec *codec)
|
|
{
|
|
struct snd_soc_dapm_path *p;
|
|
|
|
list_for_each_entry(p, &codec->dapm_paths, list)
|
|
p->walked = 0;
|
|
}
|
|
|
|
/* We implement power down on suspend by checking the power state of
|
|
* the ALSA card - when we are suspending the ALSA state for the card
|
|
* is set to D3.
|
|
*/
|
|
static int snd_soc_dapm_suspend_check(struct snd_soc_dapm_widget *widget)
|
|
{
|
|
struct snd_soc_codec *codec = widget->codec;
|
|
|
|
switch (snd_power_get_state(codec->card)) {
|
|
case SNDRV_CTL_POWER_D3hot:
|
|
case SNDRV_CTL_POWER_D3cold:
|
|
if (widget->ignore_suspend)
|
|
pr_debug("%s ignoring suspend\n", widget->name);
|
|
return widget->ignore_suspend;
|
|
default:
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Recursively check for a completed path to an active or physically connected
|
|
* output widget. Returns number of complete paths.
|
|
*/
|
|
static int is_connected_output_ep(struct snd_soc_dapm_widget *widget)
|
|
{
|
|
struct snd_soc_dapm_path *path;
|
|
int con = 0;
|
|
|
|
if (widget->id == snd_soc_dapm_supply)
|
|
return 0;
|
|
|
|
switch (widget->id) {
|
|
case snd_soc_dapm_adc:
|
|
case snd_soc_dapm_aif_out:
|
|
if (widget->active)
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (widget->connected) {
|
|
/* connected pin ? */
|
|
if (widget->id == snd_soc_dapm_output && !widget->ext)
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
|
|
/* connected jack or spk ? */
|
|
if (widget->id == snd_soc_dapm_hp || widget->id == snd_soc_dapm_spk ||
|
|
(widget->id == snd_soc_dapm_line && !list_empty(&widget->sources)))
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
}
|
|
|
|
list_for_each_entry(path, &widget->sinks, list_source) {
|
|
if (path->walked)
|
|
continue;
|
|
|
|
if (path->sink && path->connect) {
|
|
path->walked = 1;
|
|
con += is_connected_output_ep(path->sink);
|
|
}
|
|
}
|
|
|
|
return con;
|
|
}
|
|
|
|
/*
|
|
* Recursively check for a completed path to an active or physically connected
|
|
* input widget. Returns number of complete paths.
|
|
*/
|
|
static int is_connected_input_ep(struct snd_soc_dapm_widget *widget)
|
|
{
|
|
struct snd_soc_dapm_path *path;
|
|
int con = 0;
|
|
|
|
if (widget->id == snd_soc_dapm_supply)
|
|
return 0;
|
|
|
|
/* active stream ? */
|
|
switch (widget->id) {
|
|
case snd_soc_dapm_dac:
|
|
case snd_soc_dapm_aif_in:
|
|
if (widget->active)
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (widget->connected) {
|
|
/* connected pin ? */
|
|
if (widget->id == snd_soc_dapm_input && !widget->ext)
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
|
|
/* connected VMID/Bias for lower pops */
|
|
if (widget->id == snd_soc_dapm_vmid)
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
|
|
/* connected jack ? */
|
|
if (widget->id == snd_soc_dapm_mic ||
|
|
(widget->id == snd_soc_dapm_line && !list_empty(&widget->sinks)))
|
|
return snd_soc_dapm_suspend_check(widget);
|
|
}
|
|
|
|
list_for_each_entry(path, &widget->sources, list_sink) {
|
|
if (path->walked)
|
|
continue;
|
|
|
|
if (path->source && path->connect) {
|
|
path->walked = 1;
|
|
con += is_connected_input_ep(path->source);
|
|
}
|
|
}
|
|
|
|
return con;
|
|
}
|
|
|
|
/*
|
|
* Handler for generic register modifier widget.
|
|
*/
|
|
int dapm_reg_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
unsigned int val;
|
|
|
|
if (SND_SOC_DAPM_EVENT_ON(event))
|
|
val = w->on_val;
|
|
else
|
|
val = w->off_val;
|
|
|
|
snd_soc_update_bits(w->codec, -(w->reg + 1),
|
|
w->mask << w->shift, val << w->shift);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(dapm_reg_event);
|
|
|
|
/* Standard power change method, used to apply power changes to most
|
|
* widgets.
|
|
*/
|
|
static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
|
|
{
|
|
int ret;
|
|
|
|
/* call any power change event handlers */
|
|
if (w->event)
|
|
pr_debug("power %s event for %s flags %x\n",
|
|
w->power ? "on" : "off",
|
|
w->name, w->event_flags);
|
|
|
|
/* power up pre event */
|
|
if (w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
|
|
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* power down pre event */
|
|
if (!w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
|
|
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
dapm_update_bits(w);
|
|
|
|
/* power up post event */
|
|
if (w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_POST_PMU)) {
|
|
ret = w->event(w,
|
|
NULL, SND_SOC_DAPM_POST_PMU);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* power down post event */
|
|
if (!w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_POST_PMD)) {
|
|
ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Generic check to see if a widget should be powered.
|
|
*/
|
|
static int dapm_generic_check_power(struct snd_soc_dapm_widget *w)
|
|
{
|
|
int in, out;
|
|
|
|
in = is_connected_input_ep(w);
|
|
dapm_clear_walk(w->codec);
|
|
out = is_connected_output_ep(w);
|
|
dapm_clear_walk(w->codec);
|
|
return out != 0 && in != 0;
|
|
}
|
|
|
|
/* Check to see if an ADC has power */
|
|
static int dapm_adc_check_power(struct snd_soc_dapm_widget *w)
|
|
{
|
|
int in;
|
|
|
|
if (w->active) {
|
|
in = is_connected_input_ep(w);
|
|
dapm_clear_walk(w->codec);
|
|
return in != 0;
|
|
} else {
|
|
return dapm_generic_check_power(w);
|
|
}
|
|
}
|
|
|
|
/* Check to see if a DAC has power */
|
|
static int dapm_dac_check_power(struct snd_soc_dapm_widget *w)
|
|
{
|
|
int out;
|
|
|
|
if (w->active) {
|
|
out = is_connected_output_ep(w);
|
|
dapm_clear_walk(w->codec);
|
|
return out != 0;
|
|
} else {
|
|
return dapm_generic_check_power(w);
|
|
}
|
|
}
|
|
|
|
/* Check to see if a power supply is needed */
|
|
static int dapm_supply_check_power(struct snd_soc_dapm_widget *w)
|
|
{
|
|
struct snd_soc_dapm_path *path;
|
|
int power = 0;
|
|
|
|
/* Check if one of our outputs is connected */
|
|
list_for_each_entry(path, &w->sinks, list_source) {
|
|
if (path->connected &&
|
|
!path->connected(path->source, path->sink))
|
|
continue;
|
|
|
|
if (path->sink && path->sink->power_check &&
|
|
path->sink->power_check(path->sink)) {
|
|
power = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
dapm_clear_walk(w->codec);
|
|
|
|
return power;
|
|
}
|
|
|
|
static int dapm_seq_compare(struct snd_soc_dapm_widget *a,
|
|
struct snd_soc_dapm_widget *b,
|
|
int sort[])
|
|
{
|
|
if (a->codec != b->codec)
|
|
return (unsigned long)a - (unsigned long)b;
|
|
if (sort[a->id] != sort[b->id])
|
|
return sort[a->id] - sort[b->id];
|
|
if (a->reg != b->reg)
|
|
return a->reg - b->reg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Insert a widget in order into a DAPM power sequence. */
|
|
static void dapm_seq_insert(struct snd_soc_dapm_widget *new_widget,
|
|
struct list_head *list,
|
|
int sort[])
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
list_for_each_entry(w, list, power_list)
|
|
if (dapm_seq_compare(new_widget, w, sort) < 0) {
|
|
list_add_tail(&new_widget->power_list, &w->power_list);
|
|
return;
|
|
}
|
|
|
|
list_add_tail(&new_widget->power_list, list);
|
|
}
|
|
|
|
/* Apply the coalesced changes from a DAPM sequence */
|
|
static void dapm_seq_run_coalesced(struct snd_soc_codec *codec,
|
|
struct list_head *pending)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
int reg, power, ret;
|
|
unsigned int value = 0;
|
|
unsigned int mask = 0;
|
|
unsigned int cur_mask;
|
|
|
|
reg = list_first_entry(pending, struct snd_soc_dapm_widget,
|
|
power_list)->reg;
|
|
|
|
list_for_each_entry(w, pending, power_list) {
|
|
cur_mask = 1 << w->shift;
|
|
BUG_ON(reg != w->reg);
|
|
|
|
if (w->invert)
|
|
power = !w->power;
|
|
else
|
|
power = w->power;
|
|
|
|
mask |= cur_mask;
|
|
if (power)
|
|
value |= cur_mask;
|
|
|
|
pop_dbg(codec->pop_time,
|
|
"pop test : Queue %s: reg=0x%x, 0x%x/0x%x\n",
|
|
w->name, reg, value, mask);
|
|
|
|
/* power up pre event */
|
|
if (w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_PRE_PMU)) {
|
|
pop_dbg(codec->pop_time, "pop test : %s PRE_PMU\n",
|
|
w->name);
|
|
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
|
|
if (ret < 0)
|
|
pr_err("%s: pre event failed: %d\n",
|
|
w->name, ret);
|
|
}
|
|
|
|
/* power down pre event */
|
|
if (!w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_PRE_PMD)) {
|
|
pop_dbg(codec->pop_time, "pop test : %s PRE_PMD\n",
|
|
w->name);
|
|
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
|
|
if (ret < 0)
|
|
pr_err("%s: pre event failed: %d\n",
|
|
w->name, ret);
|
|
}
|
|
}
|
|
|
|
if (reg >= 0) {
|
|
pop_dbg(codec->pop_time,
|
|
"pop test : Applying 0x%x/0x%x to %x in %dms\n",
|
|
value, mask, reg, codec->pop_time);
|
|
pop_wait(codec->pop_time);
|
|
snd_soc_update_bits(codec, reg, mask, value);
|
|
}
|
|
|
|
list_for_each_entry(w, pending, power_list) {
|
|
/* power up post event */
|
|
if (w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_POST_PMU)) {
|
|
pop_dbg(codec->pop_time, "pop test : %s POST_PMU\n",
|
|
w->name);
|
|
ret = w->event(w,
|
|
NULL, SND_SOC_DAPM_POST_PMU);
|
|
if (ret < 0)
|
|
pr_err("%s: post event failed: %d\n",
|
|
w->name, ret);
|
|
}
|
|
|
|
/* power down post event */
|
|
if (!w->power && w->event &&
|
|
(w->event_flags & SND_SOC_DAPM_POST_PMD)) {
|
|
pop_dbg(codec->pop_time, "pop test : %s POST_PMD\n",
|
|
w->name);
|
|
ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
|
|
if (ret < 0)
|
|
pr_err("%s: post event failed: %d\n",
|
|
w->name, ret);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Apply a DAPM power sequence.
|
|
*
|
|
* We walk over a pre-sorted list of widgets to apply power to. In
|
|
* order to minimise the number of writes to the device required
|
|
* multiple widgets will be updated in a single write where possible.
|
|
* Currently anything that requires more than a single write is not
|
|
* handled.
|
|
*/
|
|
static void dapm_seq_run(struct snd_soc_codec *codec, struct list_head *list,
|
|
int event, int sort[])
|
|
{
|
|
struct snd_soc_dapm_widget *w, *n;
|
|
LIST_HEAD(pending);
|
|
int cur_sort = -1;
|
|
int cur_reg = SND_SOC_NOPM;
|
|
int ret;
|
|
|
|
list_for_each_entry_safe(w, n, list, power_list) {
|
|
ret = 0;
|
|
|
|
/* Do we need to apply any queued changes? */
|
|
if (sort[w->id] != cur_sort || w->reg != cur_reg) {
|
|
if (!list_empty(&pending))
|
|
dapm_seq_run_coalesced(codec, &pending);
|
|
|
|
INIT_LIST_HEAD(&pending);
|
|
cur_sort = -1;
|
|
cur_reg = SND_SOC_NOPM;
|
|
}
|
|
|
|
switch (w->id) {
|
|
case snd_soc_dapm_pre:
|
|
if (!w->event)
|
|
list_for_each_entry_safe_continue(w, n, list,
|
|
power_list);
|
|
|
|
if (event == SND_SOC_DAPM_STREAM_START)
|
|
ret = w->event(w,
|
|
NULL, SND_SOC_DAPM_PRE_PMU);
|
|
else if (event == SND_SOC_DAPM_STREAM_STOP)
|
|
ret = w->event(w,
|
|
NULL, SND_SOC_DAPM_PRE_PMD);
|
|
break;
|
|
|
|
case snd_soc_dapm_post:
|
|
if (!w->event)
|
|
list_for_each_entry_safe_continue(w, n, list,
|
|
power_list);
|
|
|
|
if (event == SND_SOC_DAPM_STREAM_START)
|
|
ret = w->event(w,
|
|
NULL, SND_SOC_DAPM_POST_PMU);
|
|
else if (event == SND_SOC_DAPM_STREAM_STOP)
|
|
ret = w->event(w,
|
|
NULL, SND_SOC_DAPM_POST_PMD);
|
|
break;
|
|
|
|
case snd_soc_dapm_input:
|
|
case snd_soc_dapm_output:
|
|
case snd_soc_dapm_hp:
|
|
case snd_soc_dapm_mic:
|
|
case snd_soc_dapm_line:
|
|
case snd_soc_dapm_spk:
|
|
/* No register support currently */
|
|
ret = dapm_generic_apply_power(w);
|
|
break;
|
|
|
|
default:
|
|
/* Queue it up for application */
|
|
cur_sort = sort[w->id];
|
|
cur_reg = w->reg;
|
|
list_move(&w->power_list, &pending);
|
|
break;
|
|
}
|
|
|
|
if (ret < 0)
|
|
pr_err("Failed to apply widget power: %d\n",
|
|
ret);
|
|
}
|
|
|
|
if (!list_empty(&pending))
|
|
dapm_seq_run_coalesced(codec, &pending);
|
|
}
|
|
|
|
/*
|
|
* Scan each dapm widget for complete audio path.
|
|
* A complete path is a route that has valid endpoints i.e.:-
|
|
*
|
|
* o DAC to output pin.
|
|
* o Input Pin to ADC.
|
|
* o Input pin to Output pin (bypass, sidetone)
|
|
* o DAC to ADC (loopback).
|
|
*/
|
|
static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
|
|
{
|
|
struct snd_soc_device *socdev = codec->socdev;
|
|
struct snd_soc_dapm_widget *w;
|
|
LIST_HEAD(up_list);
|
|
LIST_HEAD(down_list);
|
|
int ret = 0;
|
|
int power;
|
|
int sys_power = 0;
|
|
|
|
/* Check which widgets we need to power and store them in
|
|
* lists indicating if they should be powered up or down.
|
|
*/
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
switch (w->id) {
|
|
case snd_soc_dapm_pre:
|
|
dapm_seq_insert(w, &down_list, dapm_down_seq);
|
|
break;
|
|
case snd_soc_dapm_post:
|
|
dapm_seq_insert(w, &up_list, dapm_up_seq);
|
|
break;
|
|
|
|
default:
|
|
if (!w->power_check)
|
|
continue;
|
|
|
|
if (!w->force)
|
|
power = w->power_check(w);
|
|
else
|
|
power = 1;
|
|
if (power)
|
|
sys_power = 1;
|
|
|
|
if (w->power == power)
|
|
continue;
|
|
|
|
if (power)
|
|
dapm_seq_insert(w, &up_list, dapm_up_seq);
|
|
else
|
|
dapm_seq_insert(w, &down_list, dapm_down_seq);
|
|
|
|
w->power = power;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* If there are no DAPM widgets then try to figure out power from the
|
|
* event type.
|
|
*/
|
|
if (list_empty(&codec->dapm_widgets)) {
|
|
switch (event) {
|
|
case SND_SOC_DAPM_STREAM_START:
|
|
case SND_SOC_DAPM_STREAM_RESUME:
|
|
sys_power = 1;
|
|
break;
|
|
case SND_SOC_DAPM_STREAM_SUSPEND:
|
|
sys_power = 0;
|
|
break;
|
|
case SND_SOC_DAPM_STREAM_NOP:
|
|
switch (codec->bias_level) {
|
|
case SND_SOC_BIAS_STANDBY:
|
|
case SND_SOC_BIAS_OFF:
|
|
sys_power = 0;
|
|
break;
|
|
default:
|
|
sys_power = 1;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (sys_power && codec->bias_level == SND_SOC_BIAS_OFF) {
|
|
ret = snd_soc_dapm_set_bias_level(socdev,
|
|
SND_SOC_BIAS_STANDBY);
|
|
if (ret != 0)
|
|
pr_err("Failed to turn on bias: %d\n", ret);
|
|
}
|
|
|
|
/* If we're changing to all on or all off then prepare */
|
|
if ((sys_power && codec->bias_level == SND_SOC_BIAS_STANDBY) ||
|
|
(!sys_power && codec->bias_level == SND_SOC_BIAS_ON)) {
|
|
ret = snd_soc_dapm_set_bias_level(socdev,
|
|
SND_SOC_BIAS_PREPARE);
|
|
if (ret != 0)
|
|
pr_err("Failed to prepare bias: %d\n", ret);
|
|
}
|
|
|
|
/* Power down widgets first; try to avoid amplifying pops. */
|
|
dapm_seq_run(codec, &down_list, event, dapm_down_seq);
|
|
|
|
/* Now power up. */
|
|
dapm_seq_run(codec, &up_list, event, dapm_up_seq);
|
|
|
|
/* If we just powered the last thing off drop to standby bias */
|
|
if (codec->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
|
|
ret = snd_soc_dapm_set_bias_level(socdev,
|
|
SND_SOC_BIAS_STANDBY);
|
|
if (ret != 0)
|
|
pr_err("Failed to apply standby bias: %d\n", ret);
|
|
}
|
|
|
|
/* If we're in standby and can support bias off then do that */
|
|
if (codec->bias_level == SND_SOC_BIAS_STANDBY &&
|
|
codec->idle_bias_off) {
|
|
ret = snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_OFF);
|
|
if (ret != 0)
|
|
pr_err("Failed to turn off bias: %d\n", ret);
|
|
}
|
|
|
|
/* If we just powered up then move to active bias */
|
|
if (codec->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
|
|
ret = snd_soc_dapm_set_bias_level(socdev,
|
|
SND_SOC_BIAS_ON);
|
|
if (ret != 0)
|
|
pr_err("Failed to apply active bias: %d\n", ret);
|
|
}
|
|
|
|
pop_dbg(codec->pop_time, "DAPM sequencing finished, waiting %dms\n",
|
|
codec->pop_time);
|
|
pop_wait(codec->pop_time);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int dapm_widget_power_open_file(struct inode *inode, struct file *file)
|
|
{
|
|
file->private_data = inode->i_private;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t dapm_widget_power_read_file(struct file *file,
|
|
char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct snd_soc_dapm_widget *w = file->private_data;
|
|
char *buf;
|
|
int in, out;
|
|
ssize_t ret;
|
|
struct snd_soc_dapm_path *p = NULL;
|
|
|
|
buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
in = is_connected_input_ep(w);
|
|
dapm_clear_walk(w->codec);
|
|
out = is_connected_output_ep(w);
|
|
dapm_clear_walk(w->codec);
|
|
|
|
ret = snprintf(buf, PAGE_SIZE, "%s: %s in %d out %d",
|
|
w->name, w->power ? "On" : "Off", in, out);
|
|
|
|
if (w->reg >= 0)
|
|
ret += snprintf(buf + ret, PAGE_SIZE - ret,
|
|
" - R%d(0x%x) bit %d",
|
|
w->reg, w->reg, w->shift);
|
|
|
|
ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
|
|
|
|
if (w->sname)
|
|
ret += snprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
|
|
w->sname,
|
|
w->active ? "active" : "inactive");
|
|
|
|
list_for_each_entry(p, &w->sources, list_sink) {
|
|
if (p->connected && !p->connected(w, p->sink))
|
|
continue;
|
|
|
|
if (p->connect)
|
|
ret += snprintf(buf + ret, PAGE_SIZE - ret,
|
|
" in %s %s\n",
|
|
p->name ? p->name : "static",
|
|
p->source->name);
|
|
}
|
|
list_for_each_entry(p, &w->sinks, list_source) {
|
|
if (p->connected && !p->connected(w, p->sink))
|
|
continue;
|
|
|
|
if (p->connect)
|
|
ret += snprintf(buf + ret, PAGE_SIZE - ret,
|
|
" out %s %s\n",
|
|
p->name ? p->name : "static",
|
|
p->sink->name);
|
|
}
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
|
|
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static const struct file_operations dapm_widget_power_fops = {
|
|
.open = dapm_widget_power_open_file,
|
|
.read = dapm_widget_power_read_file,
|
|
};
|
|
|
|
void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
struct dentry *d;
|
|
|
|
if (!codec->debugfs_dapm)
|
|
return;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
if (!w->name)
|
|
continue;
|
|
|
|
d = debugfs_create_file(w->name, 0444,
|
|
codec->debugfs_dapm, w,
|
|
&dapm_widget_power_fops);
|
|
if (!d)
|
|
printk(KERN_WARNING
|
|
"ASoC: Failed to create %s debugfs file\n",
|
|
w->name);
|
|
}
|
|
}
|
|
#else
|
|
void snd_soc_dapm_debugfs_init(struct snd_soc_codec *codec)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/* test and update the power status of a mux widget */
|
|
static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
|
|
struct snd_kcontrol *kcontrol, int change,
|
|
int mux, struct soc_enum *e)
|
|
{
|
|
struct snd_soc_dapm_path *path;
|
|
int found = 0;
|
|
|
|
if (widget->id != snd_soc_dapm_mux &&
|
|
widget->id != snd_soc_dapm_value_mux)
|
|
return -ENODEV;
|
|
|
|
if (!change)
|
|
return 0;
|
|
|
|
/* find dapm widget path assoc with kcontrol */
|
|
list_for_each_entry(path, &widget->codec->dapm_paths, list) {
|
|
if (path->kcontrol != kcontrol)
|
|
continue;
|
|
|
|
if (!path->name || !e->texts[mux])
|
|
continue;
|
|
|
|
found = 1;
|
|
/* we now need to match the string in the enum to the path */
|
|
if (!(strcmp(path->name, e->texts[mux])))
|
|
path->connect = 1; /* new connection */
|
|
else
|
|
path->connect = 0; /* old connection must be powered down */
|
|
}
|
|
|
|
if (found)
|
|
dapm_power_widgets(widget->codec, SND_SOC_DAPM_STREAM_NOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* test and update the power status of a mixer or switch widget */
|
|
static int dapm_mixer_update_power(struct snd_soc_dapm_widget *widget,
|
|
struct snd_kcontrol *kcontrol, int connect)
|
|
{
|
|
struct snd_soc_dapm_path *path;
|
|
int found = 0;
|
|
|
|
if (widget->id != snd_soc_dapm_mixer &&
|
|
widget->id != snd_soc_dapm_mixer_named_ctl &&
|
|
widget->id != snd_soc_dapm_switch)
|
|
return -ENODEV;
|
|
|
|
/* find dapm widget path assoc with kcontrol */
|
|
list_for_each_entry(path, &widget->codec->dapm_paths, list) {
|
|
if (path->kcontrol != kcontrol)
|
|
continue;
|
|
|
|
/* found, now check type */
|
|
found = 1;
|
|
path->connect = connect;
|
|
break;
|
|
}
|
|
|
|
if (found)
|
|
dapm_power_widgets(widget->codec, SND_SOC_DAPM_STREAM_NOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* show dapm widget status in sys fs */
|
|
static ssize_t dapm_widget_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct snd_soc_device *devdata = dev_get_drvdata(dev);
|
|
struct snd_soc_codec *codec = devdata->card->codec;
|
|
struct snd_soc_dapm_widget *w;
|
|
int count = 0;
|
|
char *state = "not set";
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
|
|
/* only display widgets that burnm power */
|
|
switch (w->id) {
|
|
case snd_soc_dapm_hp:
|
|
case snd_soc_dapm_mic:
|
|
case snd_soc_dapm_spk:
|
|
case snd_soc_dapm_line:
|
|
case snd_soc_dapm_micbias:
|
|
case snd_soc_dapm_dac:
|
|
case snd_soc_dapm_adc:
|
|
case snd_soc_dapm_pga:
|
|
case snd_soc_dapm_mixer:
|
|
case snd_soc_dapm_mixer_named_ctl:
|
|
case snd_soc_dapm_supply:
|
|
if (w->name)
|
|
count += sprintf(buf + count, "%s: %s\n",
|
|
w->name, w->power ? "On":"Off");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
switch (codec->bias_level) {
|
|
case SND_SOC_BIAS_ON:
|
|
state = "On";
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
state = "Prepare";
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
state = "Standby";
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
state = "Off";
|
|
break;
|
|
}
|
|
count += sprintf(buf + count, "PM State: %s\n", state);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(dapm_widget, 0444, dapm_widget_show, NULL);
|
|
|
|
int snd_soc_dapm_sys_add(struct device *dev)
|
|
{
|
|
return device_create_file(dev, &dev_attr_dapm_widget);
|
|
}
|
|
|
|
static void snd_soc_dapm_sys_remove(struct device *dev)
|
|
{
|
|
device_remove_file(dev, &dev_attr_dapm_widget);
|
|
}
|
|
|
|
/* free all dapm widgets and resources */
|
|
static void dapm_free_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
struct snd_soc_dapm_widget *w, *next_w;
|
|
struct snd_soc_dapm_path *p, *next_p;
|
|
|
|
list_for_each_entry_safe(w, next_w, &codec->dapm_widgets, list) {
|
|
list_del(&w->list);
|
|
kfree(w);
|
|
}
|
|
|
|
list_for_each_entry_safe(p, next_p, &codec->dapm_paths, list) {
|
|
list_del(&p->list);
|
|
kfree(p->long_name);
|
|
kfree(p);
|
|
}
|
|
}
|
|
|
|
static int snd_soc_dapm_set_pin(struct snd_soc_codec *codec,
|
|
const char *pin, int status)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
if (!strcmp(w->name, pin)) {
|
|
pr_debug("dapm: %s: pin %s\n", codec->name, pin);
|
|
w->connected = status;
|
|
/* Allow disabling of forced pins */
|
|
if (status == 0)
|
|
w->force = 0;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
pr_err("dapm: %s: configuring unknown pin %s\n", codec->name, pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* snd_soc_dapm_sync - scan and power dapm paths
|
|
* @codec: audio codec
|
|
*
|
|
* Walks all dapm audio paths and powers widgets according to their
|
|
* stream or path usage.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_sync(struct snd_soc_codec *codec)
|
|
{
|
|
return dapm_power_widgets(codec, SND_SOC_DAPM_STREAM_NOP);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_sync);
|
|
|
|
static int snd_soc_dapm_add_route(struct snd_soc_codec *codec,
|
|
const struct snd_soc_dapm_route *route)
|
|
{
|
|
struct snd_soc_dapm_path *path;
|
|
struct snd_soc_dapm_widget *wsource = NULL, *wsink = NULL, *w;
|
|
const char *sink = route->sink;
|
|
const char *control = route->control;
|
|
const char *source = route->source;
|
|
int ret = 0;
|
|
|
|
/* find src and dest widgets */
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
|
|
if (!wsink && !(strcmp(w->name, sink))) {
|
|
wsink = w;
|
|
continue;
|
|
}
|
|
if (!wsource && !(strcmp(w->name, source))) {
|
|
wsource = w;
|
|
}
|
|
}
|
|
|
|
if (wsource == NULL || wsink == NULL)
|
|
return -ENODEV;
|
|
|
|
path = kzalloc(sizeof(struct snd_soc_dapm_path), GFP_KERNEL);
|
|
if (!path)
|
|
return -ENOMEM;
|
|
|
|
path->source = wsource;
|
|
path->sink = wsink;
|
|
path->connected = route->connected;
|
|
INIT_LIST_HEAD(&path->list);
|
|
INIT_LIST_HEAD(&path->list_source);
|
|
INIT_LIST_HEAD(&path->list_sink);
|
|
|
|
/* check for external widgets */
|
|
if (wsink->id == snd_soc_dapm_input) {
|
|
if (wsource->id == snd_soc_dapm_micbias ||
|
|
wsource->id == snd_soc_dapm_mic ||
|
|
wsource->id == snd_soc_dapm_line ||
|
|
wsource->id == snd_soc_dapm_output)
|
|
wsink->ext = 1;
|
|
}
|
|
if (wsource->id == snd_soc_dapm_output) {
|
|
if (wsink->id == snd_soc_dapm_spk ||
|
|
wsink->id == snd_soc_dapm_hp ||
|
|
wsink->id == snd_soc_dapm_line ||
|
|
wsink->id == snd_soc_dapm_input)
|
|
wsource->ext = 1;
|
|
}
|
|
|
|
/* connect static paths */
|
|
if (control == NULL) {
|
|
list_add(&path->list, &codec->dapm_paths);
|
|
list_add(&path->list_sink, &wsink->sources);
|
|
list_add(&path->list_source, &wsource->sinks);
|
|
path->connect = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* connect dynamic paths */
|
|
switch(wsink->id) {
|
|
case snd_soc_dapm_adc:
|
|
case snd_soc_dapm_dac:
|
|
case snd_soc_dapm_pga:
|
|
case snd_soc_dapm_input:
|
|
case snd_soc_dapm_output:
|
|
case snd_soc_dapm_micbias:
|
|
case snd_soc_dapm_vmid:
|
|
case snd_soc_dapm_pre:
|
|
case snd_soc_dapm_post:
|
|
case snd_soc_dapm_supply:
|
|
case snd_soc_dapm_aif_in:
|
|
case snd_soc_dapm_aif_out:
|
|
list_add(&path->list, &codec->dapm_paths);
|
|
list_add(&path->list_sink, &wsink->sources);
|
|
list_add(&path->list_source, &wsource->sinks);
|
|
path->connect = 1;
|
|
return 0;
|
|
case snd_soc_dapm_mux:
|
|
case snd_soc_dapm_value_mux:
|
|
ret = dapm_connect_mux(codec, wsource, wsink, path, control,
|
|
&wsink->kcontrols[0]);
|
|
if (ret != 0)
|
|
goto err;
|
|
break;
|
|
case snd_soc_dapm_switch:
|
|
case snd_soc_dapm_mixer:
|
|
case snd_soc_dapm_mixer_named_ctl:
|
|
ret = dapm_connect_mixer(codec, wsource, wsink, path, control);
|
|
if (ret != 0)
|
|
goto err;
|
|
break;
|
|
case snd_soc_dapm_hp:
|
|
case snd_soc_dapm_mic:
|
|
case snd_soc_dapm_line:
|
|
case snd_soc_dapm_spk:
|
|
list_add(&path->list, &codec->dapm_paths);
|
|
list_add(&path->list_sink, &wsink->sources);
|
|
list_add(&path->list_source, &wsource->sinks);
|
|
path->connect = 0;
|
|
return 0;
|
|
}
|
|
return 0;
|
|
|
|
err:
|
|
printk(KERN_WARNING "asoc: no dapm match for %s --> %s --> %s\n", source,
|
|
control, sink);
|
|
kfree(path);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* snd_soc_dapm_add_routes - Add routes between DAPM widgets
|
|
* @codec: codec
|
|
* @route: audio routes
|
|
* @num: number of routes
|
|
*
|
|
* Connects 2 dapm widgets together via a named audio path. The sink is
|
|
* the widget receiving the audio signal, whilst the source is the sender
|
|
* of the audio signal.
|
|
*
|
|
* Returns 0 for success else error. On error all resources can be freed
|
|
* with a call to snd_soc_card_free().
|
|
*/
|
|
int snd_soc_dapm_add_routes(struct snd_soc_codec *codec,
|
|
const struct snd_soc_dapm_route *route, int num)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = snd_soc_dapm_add_route(codec, route);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "Failed to add route %s->%s\n",
|
|
route->source,
|
|
route->sink);
|
|
return ret;
|
|
}
|
|
route++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_add_routes);
|
|
|
|
/**
|
|
* snd_soc_dapm_new_widgets - add new dapm widgets
|
|
* @codec: audio codec
|
|
*
|
|
* Checks the codec for any new dapm widgets and creates them if found.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list)
|
|
{
|
|
if (w->new)
|
|
continue;
|
|
|
|
switch(w->id) {
|
|
case snd_soc_dapm_switch:
|
|
case snd_soc_dapm_mixer:
|
|
case snd_soc_dapm_mixer_named_ctl:
|
|
w->power_check = dapm_generic_check_power;
|
|
dapm_new_mixer(codec, w);
|
|
break;
|
|
case snd_soc_dapm_mux:
|
|
case snd_soc_dapm_value_mux:
|
|
w->power_check = dapm_generic_check_power;
|
|
dapm_new_mux(codec, w);
|
|
break;
|
|
case snd_soc_dapm_adc:
|
|
case snd_soc_dapm_aif_out:
|
|
w->power_check = dapm_adc_check_power;
|
|
break;
|
|
case snd_soc_dapm_dac:
|
|
case snd_soc_dapm_aif_in:
|
|
w->power_check = dapm_dac_check_power;
|
|
break;
|
|
case snd_soc_dapm_pga:
|
|
w->power_check = dapm_generic_check_power;
|
|
dapm_new_pga(codec, w);
|
|
break;
|
|
case snd_soc_dapm_input:
|
|
case snd_soc_dapm_output:
|
|
case snd_soc_dapm_micbias:
|
|
case snd_soc_dapm_spk:
|
|
case snd_soc_dapm_hp:
|
|
case snd_soc_dapm_mic:
|
|
case snd_soc_dapm_line:
|
|
w->power_check = dapm_generic_check_power;
|
|
break;
|
|
case snd_soc_dapm_supply:
|
|
w->power_check = dapm_supply_check_power;
|
|
case snd_soc_dapm_vmid:
|
|
case snd_soc_dapm_pre:
|
|
case snd_soc_dapm_post:
|
|
break;
|
|
}
|
|
w->new = 1;
|
|
}
|
|
|
|
dapm_power_widgets(codec, SND_SOC_DAPM_STREAM_NOP);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_new_widgets);
|
|
|
|
/**
|
|
* snd_soc_dapm_get_volsw - dapm mixer get callback
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Callback to get the value of a dapm mixer control.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_get_volsw(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int shift = mc->shift;
|
|
unsigned int rshift = mc->rshift;
|
|
int max = mc->max;
|
|
unsigned int invert = mc->invert;
|
|
unsigned int mask = (1 << fls(max)) - 1;
|
|
|
|
ucontrol->value.integer.value[0] =
|
|
(snd_soc_read(widget->codec, reg) >> shift) & mask;
|
|
if (shift != rshift)
|
|
ucontrol->value.integer.value[1] =
|
|
(snd_soc_read(widget->codec, reg) >> rshift) & mask;
|
|
if (invert) {
|
|
ucontrol->value.integer.value[0] =
|
|
max - ucontrol->value.integer.value[0];
|
|
if (shift != rshift)
|
|
ucontrol->value.integer.value[1] =
|
|
max - ucontrol->value.integer.value[1];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_volsw);
|
|
|
|
/**
|
|
* snd_soc_dapm_put_volsw - dapm mixer set callback
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Callback to set the value of a dapm mixer control.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int shift = mc->shift;
|
|
unsigned int rshift = mc->rshift;
|
|
int max = mc->max;
|
|
unsigned int mask = (1 << fls(max)) - 1;
|
|
unsigned int invert = mc->invert;
|
|
unsigned int val, val2, val_mask;
|
|
int connect;
|
|
int ret;
|
|
|
|
val = (ucontrol->value.integer.value[0] & mask);
|
|
|
|
if (invert)
|
|
val = max - val;
|
|
val_mask = mask << shift;
|
|
val = val << shift;
|
|
if (shift != rshift) {
|
|
val2 = (ucontrol->value.integer.value[1] & mask);
|
|
if (invert)
|
|
val2 = max - val2;
|
|
val_mask |= mask << rshift;
|
|
val |= val2 << rshift;
|
|
}
|
|
|
|
mutex_lock(&widget->codec->mutex);
|
|
widget->value = val;
|
|
|
|
if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) {
|
|
if (val)
|
|
/* new connection */
|
|
connect = invert ? 0:1;
|
|
else
|
|
/* old connection must be powered down */
|
|
connect = invert ? 1:0;
|
|
|
|
dapm_mixer_update_power(widget, kcontrol, connect);
|
|
}
|
|
|
|
if (widget->event) {
|
|
if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
|
|
ret = widget->event(widget, kcontrol,
|
|
SND_SOC_DAPM_PRE_REG);
|
|
if (ret < 0) {
|
|
ret = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
ret = snd_soc_update_bits(widget->codec, reg, val_mask, val);
|
|
if (widget->event_flags & SND_SOC_DAPM_POST_REG)
|
|
ret = widget->event(widget, kcontrol,
|
|
SND_SOC_DAPM_POST_REG);
|
|
} else
|
|
ret = snd_soc_update_bits(widget->codec, reg, val_mask, val);
|
|
|
|
out:
|
|
mutex_unlock(&widget->codec->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_put_volsw);
|
|
|
|
/**
|
|
* snd_soc_dapm_get_enum_double - dapm enumerated double mixer get callback
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Callback to get the value of a dapm enumerated double mixer control.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_get_enum_double(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
unsigned int val, bitmask;
|
|
|
|
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
|
|
;
|
|
val = snd_soc_read(widget->codec, e->reg);
|
|
ucontrol->value.enumerated.item[0] = (val >> e->shift_l) & (bitmask - 1);
|
|
if (e->shift_l != e->shift_r)
|
|
ucontrol->value.enumerated.item[1] =
|
|
(val >> e->shift_r) & (bitmask - 1);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_enum_double);
|
|
|
|
/**
|
|
* snd_soc_dapm_put_enum_double - dapm enumerated double mixer set callback
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Callback to set the value of a dapm enumerated double mixer control.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
unsigned int val, mux, change;
|
|
unsigned int mask, bitmask;
|
|
int ret = 0;
|
|
|
|
for (bitmask = 1; bitmask < e->max; bitmask <<= 1)
|
|
;
|
|
if (ucontrol->value.enumerated.item[0] > e->max - 1)
|
|
return -EINVAL;
|
|
mux = ucontrol->value.enumerated.item[0];
|
|
val = mux << e->shift_l;
|
|
mask = (bitmask - 1) << e->shift_l;
|
|
if (e->shift_l != e->shift_r) {
|
|
if (ucontrol->value.enumerated.item[1] > e->max - 1)
|
|
return -EINVAL;
|
|
val |= ucontrol->value.enumerated.item[1] << e->shift_r;
|
|
mask |= (bitmask - 1) << e->shift_r;
|
|
}
|
|
|
|
mutex_lock(&widget->codec->mutex);
|
|
widget->value = val;
|
|
change = snd_soc_test_bits(widget->codec, e->reg, mask, val);
|
|
dapm_mux_update_power(widget, kcontrol, change, mux, e);
|
|
|
|
if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
|
|
ret = widget->event(widget,
|
|
kcontrol, SND_SOC_DAPM_PRE_REG);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
|
|
|
|
if (widget->event_flags & SND_SOC_DAPM_POST_REG)
|
|
ret = widget->event(widget,
|
|
kcontrol, SND_SOC_DAPM_POST_REG);
|
|
|
|
out:
|
|
mutex_unlock(&widget->codec->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_put_enum_double);
|
|
|
|
/**
|
|
* snd_soc_dapm_get_enum_virt - Get virtual DAPM mux
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_get_enum_virt(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
|
|
ucontrol->value.enumerated.item[0] = widget->value;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_enum_virt);
|
|
|
|
/**
|
|
* snd_soc_dapm_put_enum_virt - Set virtual DAPM mux
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_put_enum_virt(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_enum *e =
|
|
(struct soc_enum *)kcontrol->private_value;
|
|
int change;
|
|
int ret = 0;
|
|
|
|
if (ucontrol->value.enumerated.item[0] >= e->max)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&widget->codec->mutex);
|
|
|
|
change = widget->value != ucontrol->value.enumerated.item[0];
|
|
widget->value = ucontrol->value.enumerated.item[0];
|
|
dapm_mux_update_power(widget, kcontrol, change, widget->value, e);
|
|
|
|
mutex_unlock(&widget->codec->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_put_enum_virt);
|
|
|
|
/**
|
|
* snd_soc_dapm_get_value_enum_double - dapm semi enumerated double mixer get
|
|
* callback
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Callback to get the value of a dapm semi enumerated double mixer control.
|
|
*
|
|
* Semi enumerated mixer: the enumerated items are referred as values. Can be
|
|
* used for handling bitfield coded enumeration for example.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
unsigned int reg_val, val, mux;
|
|
|
|
reg_val = snd_soc_read(widget->codec, e->reg);
|
|
val = (reg_val >> e->shift_l) & e->mask;
|
|
for (mux = 0; mux < e->max; mux++) {
|
|
if (val == e->values[mux])
|
|
break;
|
|
}
|
|
ucontrol->value.enumerated.item[0] = mux;
|
|
if (e->shift_l != e->shift_r) {
|
|
val = (reg_val >> e->shift_r) & e->mask;
|
|
for (mux = 0; mux < e->max; mux++) {
|
|
if (val == e->values[mux])
|
|
break;
|
|
}
|
|
ucontrol->value.enumerated.item[1] = mux;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_value_enum_double);
|
|
|
|
/**
|
|
* snd_soc_dapm_put_value_enum_double - dapm semi enumerated double mixer set
|
|
* callback
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: control element information
|
|
*
|
|
* Callback to set the value of a dapm semi enumerated double mixer control.
|
|
*
|
|
* Semi enumerated mixer: the enumerated items are referred as values. Can be
|
|
* used for handling bitfield coded enumeration for example.
|
|
*
|
|
* Returns 0 for success.
|
|
*/
|
|
int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
unsigned int val, mux, change;
|
|
unsigned int mask;
|
|
int ret = 0;
|
|
|
|
if (ucontrol->value.enumerated.item[0] > e->max - 1)
|
|
return -EINVAL;
|
|
mux = ucontrol->value.enumerated.item[0];
|
|
val = e->values[ucontrol->value.enumerated.item[0]] << e->shift_l;
|
|
mask = e->mask << e->shift_l;
|
|
if (e->shift_l != e->shift_r) {
|
|
if (ucontrol->value.enumerated.item[1] > e->max - 1)
|
|
return -EINVAL;
|
|
val |= e->values[ucontrol->value.enumerated.item[1]] << e->shift_r;
|
|
mask |= e->mask << e->shift_r;
|
|
}
|
|
|
|
mutex_lock(&widget->codec->mutex);
|
|
widget->value = val;
|
|
change = snd_soc_test_bits(widget->codec, e->reg, mask, val);
|
|
dapm_mux_update_power(widget, kcontrol, change, mux, e);
|
|
|
|
if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
|
|
ret = widget->event(widget,
|
|
kcontrol, SND_SOC_DAPM_PRE_REG);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
|
|
|
|
if (widget->event_flags & SND_SOC_DAPM_POST_REG)
|
|
ret = widget->event(widget,
|
|
kcontrol, SND_SOC_DAPM_POST_REG);
|
|
|
|
out:
|
|
mutex_unlock(&widget->codec->mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_put_value_enum_double);
|
|
|
|
/**
|
|
* snd_soc_dapm_info_pin_switch - Info for a pin switch
|
|
*
|
|
* @kcontrol: mixer control
|
|
* @uinfo: control element information
|
|
*
|
|
* Callback to provide information about a pin switch control.
|
|
*/
|
|
int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_info_pin_switch);
|
|
|
|
/**
|
|
* snd_soc_dapm_get_pin_switch - Get information for a pin switch
|
|
*
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: Value
|
|
*/
|
|
int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
const char *pin = (const char *)kcontrol->private_value;
|
|
|
|
mutex_lock(&codec->mutex);
|
|
|
|
ucontrol->value.integer.value[0] =
|
|
snd_soc_dapm_get_pin_status(codec, pin);
|
|
|
|
mutex_unlock(&codec->mutex);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_switch);
|
|
|
|
/**
|
|
* snd_soc_dapm_put_pin_switch - Set information for a pin switch
|
|
*
|
|
* @kcontrol: mixer control
|
|
* @ucontrol: Value
|
|
*/
|
|
int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
const char *pin = (const char *)kcontrol->private_value;
|
|
|
|
mutex_lock(&codec->mutex);
|
|
|
|
if (ucontrol->value.integer.value[0])
|
|
snd_soc_dapm_enable_pin(codec, pin);
|
|
else
|
|
snd_soc_dapm_disable_pin(codec, pin);
|
|
|
|
snd_soc_dapm_sync(codec);
|
|
|
|
mutex_unlock(&codec->mutex);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_put_pin_switch);
|
|
|
|
/**
|
|
* snd_soc_dapm_new_control - create new dapm control
|
|
* @codec: audio codec
|
|
* @widget: widget template
|
|
*
|
|
* Creates a new dapm control based upon the template.
|
|
*
|
|
* Returns 0 for success else error.
|
|
*/
|
|
int snd_soc_dapm_new_control(struct snd_soc_codec *codec,
|
|
const struct snd_soc_dapm_widget *widget)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
if ((w = dapm_cnew_widget(widget)) == NULL)
|
|
return -ENOMEM;
|
|
|
|
w->codec = codec;
|
|
INIT_LIST_HEAD(&w->sources);
|
|
INIT_LIST_HEAD(&w->sinks);
|
|
INIT_LIST_HEAD(&w->list);
|
|
list_add(&w->list, &codec->dapm_widgets);
|
|
|
|
/* machine layer set ups unconnected pins and insertions */
|
|
w->connected = 1;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_new_control);
|
|
|
|
/**
|
|
* snd_soc_dapm_new_controls - create new dapm controls
|
|
* @codec: audio codec
|
|
* @widget: widget array
|
|
* @num: number of widgets
|
|
*
|
|
* Creates new DAPM controls based upon the templates.
|
|
*
|
|
* Returns 0 for success else error.
|
|
*/
|
|
int snd_soc_dapm_new_controls(struct snd_soc_codec *codec,
|
|
const struct snd_soc_dapm_widget *widget,
|
|
int num)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = snd_soc_dapm_new_control(codec, widget);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR
|
|
"ASoC: Failed to create DAPM control %s: %d\n",
|
|
widget->name, ret);
|
|
return ret;
|
|
}
|
|
widget++;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_new_controls);
|
|
|
|
|
|
/**
|
|
* snd_soc_dapm_stream_event - send a stream event to the dapm core
|
|
* @codec: audio codec
|
|
* @stream: stream name
|
|
* @event: stream event
|
|
*
|
|
* Sends a stream event to the dapm core. The core then makes any
|
|
* necessary widget power changes.
|
|
*
|
|
* Returns 0 for success else error.
|
|
*/
|
|
int snd_soc_dapm_stream_event(struct snd_soc_codec *codec,
|
|
char *stream, int event)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
if (stream == NULL)
|
|
return 0;
|
|
|
|
mutex_lock(&codec->mutex);
|
|
list_for_each_entry(w, &codec->dapm_widgets, list)
|
|
{
|
|
if (!w->sname)
|
|
continue;
|
|
pr_debug("widget %s\n %s stream %s event %d\n",
|
|
w->name, w->sname, stream, event);
|
|
if (strstr(w->sname, stream)) {
|
|
switch(event) {
|
|
case SND_SOC_DAPM_STREAM_START:
|
|
w->active = 1;
|
|
break;
|
|
case SND_SOC_DAPM_STREAM_STOP:
|
|
w->active = 0;
|
|
break;
|
|
case SND_SOC_DAPM_STREAM_SUSPEND:
|
|
case SND_SOC_DAPM_STREAM_RESUME:
|
|
case SND_SOC_DAPM_STREAM_PAUSE_PUSH:
|
|
case SND_SOC_DAPM_STREAM_PAUSE_RELEASE:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
dapm_power_widgets(codec, event);
|
|
mutex_unlock(&codec->mutex);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event);
|
|
|
|
/**
|
|
* snd_soc_dapm_enable_pin - enable pin.
|
|
* @codec: SoC codec
|
|
* @pin: pin name
|
|
*
|
|
* Enables input/output pin and its parents or children widgets iff there is
|
|
* a valid audio route and active audio stream.
|
|
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
|
|
* do any widget power switching.
|
|
*/
|
|
int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin)
|
|
{
|
|
return snd_soc_dapm_set_pin(codec, pin, 1);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_enable_pin);
|
|
|
|
/**
|
|
* snd_soc_dapm_force_enable_pin - force a pin to be enabled
|
|
* @codec: SoC codec
|
|
* @pin: pin name
|
|
*
|
|
* Enables input/output pin regardless of any other state. This is
|
|
* intended for use with microphone bias supplies used in microphone
|
|
* jack detection.
|
|
*
|
|
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
|
|
* do any widget power switching.
|
|
*/
|
|
int snd_soc_dapm_force_enable_pin(struct snd_soc_codec *codec, const char *pin)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
if (!strcmp(w->name, pin)) {
|
|
pr_debug("dapm: %s: pin %s\n", codec->name, pin);
|
|
w->connected = 1;
|
|
w->force = 1;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
pr_err("dapm: %s: configuring unknown pin %s\n", codec->name, pin);
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_force_enable_pin);
|
|
|
|
/**
|
|
* snd_soc_dapm_disable_pin - disable pin.
|
|
* @codec: SoC codec
|
|
* @pin: pin name
|
|
*
|
|
* Disables input/output pin and its parents or children widgets.
|
|
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
|
|
* do any widget power switching.
|
|
*/
|
|
int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin)
|
|
{
|
|
return snd_soc_dapm_set_pin(codec, pin, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_disable_pin);
|
|
|
|
/**
|
|
* snd_soc_dapm_nc_pin - permanently disable pin.
|
|
* @codec: SoC codec
|
|
* @pin: pin name
|
|
*
|
|
* Marks the specified pin as being not connected, disabling it along
|
|
* any parent or child widgets. At present this is identical to
|
|
* snd_soc_dapm_disable_pin() but in future it will be extended to do
|
|
* additional things such as disabling controls which only affect
|
|
* paths through the pin.
|
|
*
|
|
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
|
|
* do any widget power switching.
|
|
*/
|
|
int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin)
|
|
{
|
|
return snd_soc_dapm_set_pin(codec, pin, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_nc_pin);
|
|
|
|
/**
|
|
* snd_soc_dapm_get_pin_status - get audio pin status
|
|
* @codec: audio codec
|
|
* @pin: audio signal pin endpoint (or start point)
|
|
*
|
|
* Get audio pin status - connected or disconnected.
|
|
*
|
|
* Returns 1 for connected otherwise 0.
|
|
*/
|
|
int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
if (!strcmp(w->name, pin))
|
|
return w->connected;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status);
|
|
|
|
/**
|
|
* snd_soc_dapm_ignore_suspend - ignore suspend status for DAPM endpoint
|
|
* @codec: audio codec
|
|
* @pin: audio signal pin endpoint (or start point)
|
|
*
|
|
* Mark the given endpoint or pin as ignoring suspend. When the
|
|
* system is disabled a path between two endpoints flagged as ignoring
|
|
* suspend will not be disabled. The path must already be enabled via
|
|
* normal means at suspend time, it will not be turned on if it was not
|
|
* already enabled.
|
|
*/
|
|
int snd_soc_dapm_ignore_suspend(struct snd_soc_codec *codec, const char *pin)
|
|
{
|
|
struct snd_soc_dapm_widget *w;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
if (!strcmp(w->name, pin)) {
|
|
w->ignore_suspend = 1;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
pr_err("Unknown DAPM pin: %s\n", pin);
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend);
|
|
|
|
/**
|
|
* snd_soc_dapm_free - free dapm resources
|
|
* @socdev: SoC device
|
|
*
|
|
* Free all dapm widgets and resources.
|
|
*/
|
|
void snd_soc_dapm_free(struct snd_soc_device *socdev)
|
|
{
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
snd_soc_dapm_sys_remove(socdev->dev);
|
|
dapm_free_widgets(codec);
|
|
}
|
|
EXPORT_SYMBOL_GPL(snd_soc_dapm_free);
|
|
|
|
/*
|
|
* snd_soc_dapm_shutdown - callback for system shutdown
|
|
*/
|
|
void snd_soc_dapm_shutdown(struct snd_soc_device *socdev)
|
|
{
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct snd_soc_dapm_widget *w;
|
|
LIST_HEAD(down_list);
|
|
int powerdown = 0;
|
|
|
|
list_for_each_entry(w, &codec->dapm_widgets, list) {
|
|
if (w->power) {
|
|
dapm_seq_insert(w, &down_list, dapm_down_seq);
|
|
w->power = 0;
|
|
powerdown = 1;
|
|
}
|
|
}
|
|
|
|
/* If there were no widgets to power down we're already in
|
|
* standby.
|
|
*/
|
|
if (powerdown) {
|
|
snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_PREPARE);
|
|
dapm_seq_run(codec, &down_list, 0, dapm_down_seq);
|
|
snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_STANDBY);
|
|
}
|
|
|
|
snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_OFF);
|
|
}
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Liam Girdwood, lrg@slimlogic.co.uk");
|
|
MODULE_DESCRIPTION("Dynamic Audio Power Management core for ALSA SoC");
|
|
MODULE_LICENSE("GPL");
|