linux/drivers/iio/dac
Greg Kroah-Hartman 3c9a6793bd Second round of new iio device support, features and cleanups in the 4.8 cycle
Firstly some contact detail updates:
 * NXP took over freescale. Update the mma8452 header to reflect this.
 * Martin Kepplinger email address change in mma8452 header.
 * Adriana Reus has changed email address. Update .mailmap.
 * Matt Ranostay has changed email address. Update .mailmap.
 
 New Device Support
 * max1363
   - add the missing i2c_device_ids for a couple of parts so they can actually
     be used.
 * ms5867
   - add device ids for ms5805 and ms5837 parts.
 
 New Features
 * ad5755
   - DT support.  This one was a bit controversial and under review for a long
     time.  Still no one could come up with a better solution.
 * stx104
   - add gpio support
 * ti-adc081c
   - Add ACPI device ID matching.
 
 Core changes
 * Refuse to register triggers with duplicate names.  There is no way to
   distinguish between them so this makes no sense.  A few drivers do not
   generate unique names for each instance of the device present.  We can't
   fix this without changing ABI so leave them and wait for someone to
   actually take the rare step of two identical accelerometers on the same
   board.
 * buffer-dma
   - use ARRAY_SIZE in a few appropriate locations.
 
 Tools
 * Fix the fact that the --trigger-num option in generic_buffer didn't allow
   0 which is perfectly valid in the ABI.
 
 Cleanups
 * as3935
   - improve error reporting.
   - remove redundant zeroing of a field in iio_priv.
 * gp2ap020a00f
   - use the iio_device_claim_*_mode helpers rather than open coding locking
   around mode changes.
 * isl29125
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * lidar
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * mma8452
   - more detail in devices supported description in comments (addresses and
   similar)
 * sca3000
   - add a missing error check.
 * tcs3414
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * tcs3472
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdAT2AAoJEFSFNJnE9BaIq68P/3Z0q1lc1cb+K8HV5jgukEKw
 eoxZa5lFIOuHAGeXo9GAdJiH5oT/yAIhadf3gzuuQLaTJwWYKD51aPVwgpT5M2+x
 Bnu2XiYcaoIm/Foat70ycjeYaGxO/xO2vbLp5v0BJV2ujvjm/oCKw5pxYeU4Jm63
 iKaZo9jn/HoshOMpZBrcPZ7Q1TogRdopBNe2fsc8nXFFsv8ODjOZ9Nebs2lk36e+
 PWLUWfSkv2LMBSE2LOFyjSW8E4ItBBngBcyqBTFiiln7mpXU5Vv2QSvUhpP2YjUZ
 rxKvDiG7ADuxMr901whASxyCO180yCxTRIcBsN8oP73gTGHrJnMT0Sptfz7AUUVN
 gJneiy+iy3TecJ/R6w/DnNzqmZMiEVqlYGkdXVGu8SXrKWilvzcTp5iTmDVM5zLb
 1fDZxjbLdNJuHzoSYNiCBcnfzIixOAyKTGFi3jUaPPQ/Lc1qfmgerWWlOzKeUgCZ
 5Bzak8MvWuxcO7jkMG8mbARufy3Nu6eh8a39JXFhViGtTtySydMa8eXdYPjqoAtv
 vgwJNh9U53yYui8i7vU90dM3gJaGg5a4R6EjEKCYcEJf6kM9Go8xCvjU8YWPtIKk
 rfykpPkKcQzbax07YKvb4f015x7r0V6WCGJjPn0Fi14ugNGJJ6M88l+2UcXcx1zS
 RRtVRD49Le7pIDCs1Rqn
 =6Lja
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new iio device support, features and cleanups in the 4.8 cycle

Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.

New Device Support
* max1363
  - add the missing i2c_device_ids for a couple of parts so they can actually
    be used.
* ms5867
  - add device ids for ms5805 and ms5837 parts.

New Features
* ad5755
  - DT support.  This one was a bit controversial and under review for a long
    time.  Still no one could come up with a better solution.
* stx104
  - add gpio support
* ti-adc081c
  - Add ACPI device ID matching.

Core changes
* Refuse to register triggers with duplicate names.  There is no way to
  distinguish between them so this makes no sense.  A few drivers do not
  generate unique names for each instance of the device present.  We can't
  fix this without changing ABI so leave them and wait for someone to
  actually take the rare step of two identical accelerometers on the same
  board.
* buffer-dma
  - use ARRAY_SIZE in a few appropriate locations.

Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
  0 which is perfectly valid in the ABI.

Cleanups
* as3935
  - improve error reporting.
  - remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
  - use the iio_device_claim_*_mode helpers rather than open coding locking
  around mode changes.
* isl29125
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
  - more detail in devices supported description in comments (addresses and
  similar)
* sca3000
  - add a missing error check.
* tcs3414
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
2016-06-29 15:35:01 -07:00
..
ad5064.c iio:ad5064: Add AD5625/AD5627/AD5645/AD5647/AD4665/AD5657 support 2016-02-08 18:51:26 +00:00
ad5360.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5380.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5421.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5446.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5449.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5504.c spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
ad5592r-base.c iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels() 2016-05-04 10:52:43 +01:00
ad5592r-base.h iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs 2016-04-10 14:29:06 +01:00
ad5592r.c iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs 2016-04-10 14:29:06 +01:00
ad5593r.c iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs 2016-04-10 14:29:06 +01:00
ad5624r_spi.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5624r.h
ad5686.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5755.c iio: ad5755: add support for dt bindings 2016-06-27 21:09:00 +01:00
ad5761.c iio: add ad5761 DAC driver 2016-01-24 14:46:21 +00:00
ad5764.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad5791.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ad7303.c spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
Kconfig Second round of new iio device support, features and cleanups in the 4.8 cycle 2016-06-29 15:35:01 -07:00
lpc18xx_dac.c iio: dac: add NXP LPC18xx DAC driver 2016-03-12 18:12:37 +00:00
m62332.c iio:dac:m62332: use dynamic scale 2015-10-11 15:45:17 +01:00
Makefile iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs 2016-04-10 14:29:06 +01:00
max517.c iio: max517: Add support for MAX520 and MAX521 chips. 2015-03-28 10:57:34 +00:00
max5821.c iio: dac: max5821: Fix module autoload for OF platform driver 2015-09-23 20:23:23 +01:00
mcp4725.c Merge 4.5-rc3 into staging-next 2016-02-07 17:34:04 -08:00
mcp4922.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
stx104.c Second round of new iio device support, features and cleanups in the 4.8 cycle 2016-06-29 15:35:01 -07:00
vf610_dac.c iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoC 2016-02-24 20:52:55 +00:00