forked from Minki/linux
aea08a5dfa
'commit d8b468394f
("dmaengine: Add STM32 DMA driver")' leads to the
following Smatch complaint:
drivers/dma/stm32-dma.c:562 stm32_dma_issue_pending()
error: we previously assumed 'chan->desc' could be null (see line 560)
So, this patch fixes the unchecked dereference of chan->desc by returning
operation not permitted error when stm32_dma_start_transfer() does not
succeed to allocate a virtual channel descriptor.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
1142 lines
31 KiB
C
1142 lines
31 KiB
C
/*
|
|
* Driver for STM32 DMA controller
|
|
*
|
|
* Inspired by dma-jz4740.c and tegra20-apb-dma.c
|
|
*
|
|
* Copyright (C) M'boumba Cedric Madianga 2015
|
|
* Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
|
|
*
|
|
* License terms: GNU General Public License (GPL), version 2
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "virt-dma.h"
|
|
|
|
#define STM32_DMA_LISR 0x0000 /* DMA Low Int Status Reg */
|
|
#define STM32_DMA_HISR 0x0004 /* DMA High Int Status Reg */
|
|
#define STM32_DMA_LIFCR 0x0008 /* DMA Low Int Flag Clear Reg */
|
|
#define STM32_DMA_HIFCR 0x000c /* DMA High Int Flag Clear Reg */
|
|
#define STM32_DMA_TCI BIT(5) /* Transfer Complete Interrupt */
|
|
#define STM32_DMA_TEI BIT(3) /* Transfer Error Interrupt */
|
|
#define STM32_DMA_DMEI BIT(2) /* Direct Mode Error Interrupt */
|
|
#define STM32_DMA_FEI BIT(0) /* FIFO Error Interrupt */
|
|
|
|
/* DMA Stream x Configuration Register */
|
|
#define STM32_DMA_SCR(x) (0x0010 + 0x18 * (x)) /* x = 0..7 */
|
|
#define STM32_DMA_SCR_REQ(n) ((n & 0x7) << 25)
|
|
#define STM32_DMA_SCR_MBURST_MASK GENMASK(24, 23)
|
|
#define STM32_DMA_SCR_MBURST(n) ((n & 0x3) << 23)
|
|
#define STM32_DMA_SCR_PBURST_MASK GENMASK(22, 21)
|
|
#define STM32_DMA_SCR_PBURST(n) ((n & 0x3) << 21)
|
|
#define STM32_DMA_SCR_PL_MASK GENMASK(17, 16)
|
|
#define STM32_DMA_SCR_PL(n) ((n & 0x3) << 16)
|
|
#define STM32_DMA_SCR_MSIZE_MASK GENMASK(14, 13)
|
|
#define STM32_DMA_SCR_MSIZE(n) ((n & 0x3) << 13)
|
|
#define STM32_DMA_SCR_PSIZE_MASK GENMASK(12, 11)
|
|
#define STM32_DMA_SCR_PSIZE(n) ((n & 0x3) << 11)
|
|
#define STM32_DMA_SCR_PSIZE_GET(n) ((n & STM32_DMA_SCR_PSIZE_MASK) >> 11)
|
|
#define STM32_DMA_SCR_DIR_MASK GENMASK(7, 6)
|
|
#define STM32_DMA_SCR_DIR(n) ((n & 0x3) << 6)
|
|
#define STM32_DMA_SCR_CT BIT(19) /* Target in double buffer */
|
|
#define STM32_DMA_SCR_DBM BIT(18) /* Double Buffer Mode */
|
|
#define STM32_DMA_SCR_PINCOS BIT(15) /* Peripheral inc offset size */
|
|
#define STM32_DMA_SCR_MINC BIT(10) /* Memory increment mode */
|
|
#define STM32_DMA_SCR_PINC BIT(9) /* Peripheral increment mode */
|
|
#define STM32_DMA_SCR_CIRC BIT(8) /* Circular mode */
|
|
#define STM32_DMA_SCR_PFCTRL BIT(5) /* Peripheral Flow Controller */
|
|
#define STM32_DMA_SCR_TCIE BIT(4) /* Transfer Cplete Int Enable*/
|
|
#define STM32_DMA_SCR_TEIE BIT(2) /* Transfer Error Int Enable */
|
|
#define STM32_DMA_SCR_DMEIE BIT(1) /* Direct Mode Err Int Enable */
|
|
#define STM32_DMA_SCR_EN BIT(0) /* Stream Enable */
|
|
#define STM32_DMA_SCR_CFG_MASK (STM32_DMA_SCR_PINC \
|
|
| STM32_DMA_SCR_MINC \
|
|
| STM32_DMA_SCR_PINCOS \
|
|
| STM32_DMA_SCR_PL_MASK)
|
|
#define STM32_DMA_SCR_IRQ_MASK (STM32_DMA_SCR_TCIE \
|
|
| STM32_DMA_SCR_TEIE \
|
|
| STM32_DMA_SCR_DMEIE)
|
|
|
|
/* DMA Stream x number of data register */
|
|
#define STM32_DMA_SNDTR(x) (0x0014 + 0x18 * (x))
|
|
|
|
/* DMA stream peripheral address register */
|
|
#define STM32_DMA_SPAR(x) (0x0018 + 0x18 * (x))
|
|
|
|
/* DMA stream x memory 0 address register */
|
|
#define STM32_DMA_SM0AR(x) (0x001c + 0x18 * (x))
|
|
|
|
/* DMA stream x memory 1 address register */
|
|
#define STM32_DMA_SM1AR(x) (0x0020 + 0x18 * (x))
|
|
|
|
/* DMA stream x FIFO control register */
|
|
#define STM32_DMA_SFCR(x) (0x0024 + 0x18 * (x))
|
|
#define STM32_DMA_SFCR_FTH_MASK GENMASK(1, 0)
|
|
#define STM32_DMA_SFCR_FTH(n) (n & STM32_DMA_SFCR_FTH_MASK)
|
|
#define STM32_DMA_SFCR_FEIE BIT(7) /* FIFO error interrupt enable */
|
|
#define STM32_DMA_SFCR_DMDIS BIT(2) /* Direct mode disable */
|
|
#define STM32_DMA_SFCR_MASK (STM32_DMA_SFCR_FEIE \
|
|
| STM32_DMA_SFCR_DMDIS)
|
|
|
|
/* DMA direction */
|
|
#define STM32_DMA_DEV_TO_MEM 0x00
|
|
#define STM32_DMA_MEM_TO_DEV 0x01
|
|
#define STM32_DMA_MEM_TO_MEM 0x02
|
|
|
|
/* DMA priority level */
|
|
#define STM32_DMA_PRIORITY_LOW 0x00
|
|
#define STM32_DMA_PRIORITY_MEDIUM 0x01
|
|
#define STM32_DMA_PRIORITY_HIGH 0x02
|
|
#define STM32_DMA_PRIORITY_VERY_HIGH 0x03
|
|
|
|
/* DMA FIFO threshold selection */
|
|
#define STM32_DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00
|
|
#define STM32_DMA_FIFO_THRESHOLD_HALFFULL 0x01
|
|
#define STM32_DMA_FIFO_THRESHOLD_3QUARTERSFULL 0x02
|
|
#define STM32_DMA_FIFO_THRESHOLD_FULL 0x03
|
|
|
|
#define STM32_DMA_MAX_DATA_ITEMS 0xffff
|
|
#define STM32_DMA_MAX_CHANNELS 0x08
|
|
#define STM32_DMA_MAX_REQUEST_ID 0x08
|
|
#define STM32_DMA_MAX_DATA_PARAM 0x03
|
|
|
|
enum stm32_dma_width {
|
|
STM32_DMA_BYTE,
|
|
STM32_DMA_HALF_WORD,
|
|
STM32_DMA_WORD,
|
|
};
|
|
|
|
enum stm32_dma_burst_size {
|
|
STM32_DMA_BURST_SINGLE,
|
|
STM32_DMA_BURST_INCR4,
|
|
STM32_DMA_BURST_INCR8,
|
|
STM32_DMA_BURST_INCR16,
|
|
};
|
|
|
|
struct stm32_dma_cfg {
|
|
u32 channel_id;
|
|
u32 request_line;
|
|
u32 stream_config;
|
|
u32 threshold;
|
|
};
|
|
|
|
struct stm32_dma_chan_reg {
|
|
u32 dma_lisr;
|
|
u32 dma_hisr;
|
|
u32 dma_lifcr;
|
|
u32 dma_hifcr;
|
|
u32 dma_scr;
|
|
u32 dma_sndtr;
|
|
u32 dma_spar;
|
|
u32 dma_sm0ar;
|
|
u32 dma_sm1ar;
|
|
u32 dma_sfcr;
|
|
};
|
|
|
|
struct stm32_dma_sg_req {
|
|
u32 len;
|
|
struct stm32_dma_chan_reg chan_reg;
|
|
};
|
|
|
|
struct stm32_dma_desc {
|
|
struct virt_dma_desc vdesc;
|
|
bool cyclic;
|
|
u32 num_sgs;
|
|
struct stm32_dma_sg_req sg_req[];
|
|
};
|
|
|
|
struct stm32_dma_chan {
|
|
struct virt_dma_chan vchan;
|
|
bool config_init;
|
|
bool busy;
|
|
u32 id;
|
|
u32 irq;
|
|
struct stm32_dma_desc *desc;
|
|
u32 next_sg;
|
|
struct dma_slave_config dma_sconfig;
|
|
struct stm32_dma_chan_reg chan_reg;
|
|
};
|
|
|
|
struct stm32_dma_device {
|
|
struct dma_device ddev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct reset_control *rst;
|
|
bool mem2mem;
|
|
struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS];
|
|
};
|
|
|
|
static struct stm32_dma_device *stm32_dma_get_dev(struct stm32_dma_chan *chan)
|
|
{
|
|
return container_of(chan->vchan.chan.device, struct stm32_dma_device,
|
|
ddev);
|
|
}
|
|
|
|
static struct stm32_dma_chan *to_stm32_dma_chan(struct dma_chan *c)
|
|
{
|
|
return container_of(c, struct stm32_dma_chan, vchan.chan);
|
|
}
|
|
|
|
static struct stm32_dma_desc *to_stm32_dma_desc(struct virt_dma_desc *vdesc)
|
|
{
|
|
return container_of(vdesc, struct stm32_dma_desc, vdesc);
|
|
}
|
|
|
|
static struct device *chan2dev(struct stm32_dma_chan *chan)
|
|
{
|
|
return &chan->vchan.chan.dev->device;
|
|
}
|
|
|
|
static u32 stm32_dma_read(struct stm32_dma_device *dmadev, u32 reg)
|
|
{
|
|
return readl_relaxed(dmadev->base + reg);
|
|
}
|
|
|
|
static void stm32_dma_write(struct stm32_dma_device *dmadev, u32 reg, u32 val)
|
|
{
|
|
writel_relaxed(val, dmadev->base + reg);
|
|
}
|
|
|
|
static struct stm32_dma_desc *stm32_dma_alloc_desc(u32 num_sgs)
|
|
{
|
|
return kzalloc(sizeof(struct stm32_dma_desc) +
|
|
sizeof(struct stm32_dma_sg_req) * num_sgs, GFP_NOWAIT);
|
|
}
|
|
|
|
static int stm32_dma_get_width(struct stm32_dma_chan *chan,
|
|
enum dma_slave_buswidth width)
|
|
{
|
|
switch (width) {
|
|
case DMA_SLAVE_BUSWIDTH_1_BYTE:
|
|
return STM32_DMA_BYTE;
|
|
case DMA_SLAVE_BUSWIDTH_2_BYTES:
|
|
return STM32_DMA_HALF_WORD;
|
|
case DMA_SLAVE_BUSWIDTH_4_BYTES:
|
|
return STM32_DMA_WORD;
|
|
default:
|
|
dev_err(chan2dev(chan), "Dma bus width not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int stm32_dma_get_burst(struct stm32_dma_chan *chan, u32 maxburst)
|
|
{
|
|
switch (maxburst) {
|
|
case 0:
|
|
case 1:
|
|
return STM32_DMA_BURST_SINGLE;
|
|
case 4:
|
|
return STM32_DMA_BURST_INCR4;
|
|
case 8:
|
|
return STM32_DMA_BURST_INCR8;
|
|
case 16:
|
|
return STM32_DMA_BURST_INCR16;
|
|
default:
|
|
dev_err(chan2dev(chan), "Dma burst size not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void stm32_dma_set_fifo_config(struct stm32_dma_chan *chan,
|
|
u32 src_maxburst, u32 dst_maxburst)
|
|
{
|
|
chan->chan_reg.dma_sfcr &= ~STM32_DMA_SFCR_MASK;
|
|
chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_DMEIE;
|
|
|
|
if ((!src_maxburst) && (!dst_maxburst)) {
|
|
/* Using direct mode */
|
|
chan->chan_reg.dma_scr |= STM32_DMA_SCR_DMEIE;
|
|
} else {
|
|
/* Using FIFO mode */
|
|
chan->chan_reg.dma_sfcr |= STM32_DMA_SFCR_MASK;
|
|
}
|
|
}
|
|
|
|
static int stm32_dma_slave_config(struct dma_chan *c,
|
|
struct dma_slave_config *config)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
|
|
memcpy(&chan->dma_sconfig, config, sizeof(*config));
|
|
|
|
chan->config_init = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 stm32_dma_irq_status(struct stm32_dma_chan *chan)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
u32 flags, dma_isr;
|
|
|
|
/*
|
|
* Read "flags" from DMA_xISR register corresponding to the selected
|
|
* DMA channel at the correct bit offset inside that register.
|
|
*
|
|
* If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
|
|
* If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
|
|
*/
|
|
|
|
if (chan->id & 4)
|
|
dma_isr = stm32_dma_read(dmadev, STM32_DMA_HISR);
|
|
else
|
|
dma_isr = stm32_dma_read(dmadev, STM32_DMA_LISR);
|
|
|
|
flags = dma_isr >> (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
|
|
|
|
return flags;
|
|
}
|
|
|
|
static void stm32_dma_irq_clear(struct stm32_dma_chan *chan, u32 flags)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
u32 dma_ifcr;
|
|
|
|
/*
|
|
* Write "flags" to the DMA_xIFCR register corresponding to the selected
|
|
* DMA channel at the correct bit offset inside that register.
|
|
*
|
|
* If (ch % 4) is 2 or 3, left shift the mask by 16 bits.
|
|
* If (ch % 4) is 1 or 3, additionally left shift the mask by 6 bits.
|
|
*/
|
|
dma_ifcr = flags << (((chan->id & 2) << 3) | ((chan->id & 1) * 6));
|
|
|
|
if (chan->id & 4)
|
|
stm32_dma_write(dmadev, STM32_DMA_HIFCR, dma_ifcr);
|
|
else
|
|
stm32_dma_write(dmadev, STM32_DMA_LIFCR, dma_ifcr);
|
|
}
|
|
|
|
static int stm32_dma_disable_chan(struct stm32_dma_chan *chan)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(5000);
|
|
u32 dma_scr, id;
|
|
|
|
id = chan->id;
|
|
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
|
|
|
|
if (dma_scr & STM32_DMA_SCR_EN) {
|
|
dma_scr &= ~STM32_DMA_SCR_EN;
|
|
stm32_dma_write(dmadev, STM32_DMA_SCR(id), dma_scr);
|
|
|
|
do {
|
|
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
|
|
dma_scr &= STM32_DMA_SCR_EN;
|
|
if (!dma_scr)
|
|
break;
|
|
|
|
if (time_after_eq(jiffies, timeout)) {
|
|
dev_err(chan2dev(chan), "%s: timeout!\n",
|
|
__func__);
|
|
return -EBUSY;
|
|
}
|
|
cond_resched();
|
|
} while (1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_dma_stop(struct stm32_dma_chan *chan)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
u32 dma_scr, dma_sfcr, status;
|
|
int ret;
|
|
|
|
/* Disable interrupts */
|
|
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
|
|
dma_scr &= ~STM32_DMA_SCR_IRQ_MASK;
|
|
stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), dma_scr);
|
|
dma_sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id));
|
|
dma_sfcr &= ~STM32_DMA_SFCR_FEIE;
|
|
stm32_dma_write(dmadev, STM32_DMA_SFCR(chan->id), dma_sfcr);
|
|
|
|
/* Disable DMA */
|
|
ret = stm32_dma_disable_chan(chan);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
/* Clear interrupt status if it is there */
|
|
status = stm32_dma_irq_status(chan);
|
|
if (status) {
|
|
dev_dbg(chan2dev(chan), "%s(): clearing interrupt: 0x%08x\n",
|
|
__func__, status);
|
|
stm32_dma_irq_clear(chan, status);
|
|
}
|
|
|
|
chan->busy = false;
|
|
}
|
|
|
|
static int stm32_dma_terminate_all(struct dma_chan *c)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
unsigned long flags;
|
|
LIST_HEAD(head);
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
|
|
if (chan->busy) {
|
|
stm32_dma_stop(chan);
|
|
chan->desc = NULL;
|
|
}
|
|
|
|
vchan_get_all_descriptors(&chan->vchan, &head);
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
vchan_dma_desc_free_list(&chan->vchan, &head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_dma_dump_reg(struct stm32_dma_chan *chan)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
u32 scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
|
|
u32 ndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id));
|
|
u32 spar = stm32_dma_read(dmadev, STM32_DMA_SPAR(chan->id));
|
|
u32 sm0ar = stm32_dma_read(dmadev, STM32_DMA_SM0AR(chan->id));
|
|
u32 sm1ar = stm32_dma_read(dmadev, STM32_DMA_SM1AR(chan->id));
|
|
u32 sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id));
|
|
|
|
dev_dbg(chan2dev(chan), "SCR: 0x%08x\n", scr);
|
|
dev_dbg(chan2dev(chan), "NDTR: 0x%08x\n", ndtr);
|
|
dev_dbg(chan2dev(chan), "SPAR: 0x%08x\n", spar);
|
|
dev_dbg(chan2dev(chan), "SM0AR: 0x%08x\n", sm0ar);
|
|
dev_dbg(chan2dev(chan), "SM1AR: 0x%08x\n", sm1ar);
|
|
dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr);
|
|
}
|
|
|
|
static int stm32_dma_start_transfer(struct stm32_dma_chan *chan)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
struct virt_dma_desc *vdesc;
|
|
struct stm32_dma_sg_req *sg_req;
|
|
struct stm32_dma_chan_reg *reg;
|
|
u32 status;
|
|
int ret;
|
|
|
|
ret = stm32_dma_disable_chan(chan);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!chan->desc) {
|
|
vdesc = vchan_next_desc(&chan->vchan);
|
|
if (!vdesc)
|
|
return -EPERM;
|
|
|
|
chan->desc = to_stm32_dma_desc(vdesc);
|
|
chan->next_sg = 0;
|
|
}
|
|
|
|
if (chan->next_sg == chan->desc->num_sgs)
|
|
chan->next_sg = 0;
|
|
|
|
sg_req = &chan->desc->sg_req[chan->next_sg];
|
|
reg = &sg_req->chan_reg;
|
|
|
|
stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr);
|
|
stm32_dma_write(dmadev, STM32_DMA_SPAR(chan->id), reg->dma_spar);
|
|
stm32_dma_write(dmadev, STM32_DMA_SM0AR(chan->id), reg->dma_sm0ar);
|
|
stm32_dma_write(dmadev, STM32_DMA_SFCR(chan->id), reg->dma_sfcr);
|
|
stm32_dma_write(dmadev, STM32_DMA_SM1AR(chan->id), reg->dma_sm1ar);
|
|
stm32_dma_write(dmadev, STM32_DMA_SNDTR(chan->id), reg->dma_sndtr);
|
|
|
|
chan->next_sg++;
|
|
|
|
/* Clear interrupt status if it is there */
|
|
status = stm32_dma_irq_status(chan);
|
|
if (status)
|
|
stm32_dma_irq_clear(chan, status);
|
|
|
|
stm32_dma_dump_reg(chan);
|
|
|
|
/* Start DMA */
|
|
reg->dma_scr |= STM32_DMA_SCR_EN;
|
|
stm32_dma_write(dmadev, STM32_DMA_SCR(chan->id), reg->dma_scr);
|
|
|
|
chan->busy = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
struct stm32_dma_sg_req *sg_req;
|
|
u32 dma_scr, dma_sm0ar, dma_sm1ar, id;
|
|
|
|
id = chan->id;
|
|
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(id));
|
|
|
|
if (dma_scr & STM32_DMA_SCR_DBM) {
|
|
if (chan->next_sg == chan->desc->num_sgs)
|
|
chan->next_sg = 0;
|
|
|
|
sg_req = &chan->desc->sg_req[chan->next_sg];
|
|
|
|
if (dma_scr & STM32_DMA_SCR_CT) {
|
|
dma_sm0ar = sg_req->chan_reg.dma_sm0ar;
|
|
stm32_dma_write(dmadev, STM32_DMA_SM0AR(id), dma_sm0ar);
|
|
dev_dbg(chan2dev(chan), "CT=1 <=> SM0AR: 0x%08x\n",
|
|
stm32_dma_read(dmadev, STM32_DMA_SM0AR(id)));
|
|
} else {
|
|
dma_sm1ar = sg_req->chan_reg.dma_sm1ar;
|
|
stm32_dma_write(dmadev, STM32_DMA_SM1AR(id), dma_sm1ar);
|
|
dev_dbg(chan2dev(chan), "CT=0 <=> SM1AR: 0x%08x\n",
|
|
stm32_dma_read(dmadev, STM32_DMA_SM1AR(id)));
|
|
}
|
|
|
|
chan->next_sg++;
|
|
}
|
|
}
|
|
|
|
static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan)
|
|
{
|
|
if (chan->desc) {
|
|
if (chan->desc->cyclic) {
|
|
vchan_cyclic_callback(&chan->desc->vdesc);
|
|
stm32_dma_configure_next_sg(chan);
|
|
} else {
|
|
chan->busy = false;
|
|
if (chan->next_sg == chan->desc->num_sgs) {
|
|
list_del(&chan->desc->vdesc.node);
|
|
vchan_cookie_complete(&chan->desc->vdesc);
|
|
chan->desc = NULL;
|
|
}
|
|
stm32_dma_start_transfer(chan);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t stm32_dma_chan_irq(int irq, void *devid)
|
|
{
|
|
struct stm32_dma_chan *chan = devid;
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
u32 status, scr, sfcr;
|
|
|
|
spin_lock(&chan->vchan.lock);
|
|
|
|
status = stm32_dma_irq_status(chan);
|
|
scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
|
|
sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id));
|
|
|
|
if ((status & STM32_DMA_TCI) && (scr & STM32_DMA_SCR_TCIE)) {
|
|
stm32_dma_irq_clear(chan, STM32_DMA_TCI);
|
|
stm32_dma_handle_chan_done(chan);
|
|
|
|
} else {
|
|
stm32_dma_irq_clear(chan, status);
|
|
dev_err(chan2dev(chan), "DMA error: status=0x%08x\n", status);
|
|
}
|
|
|
|
spin_unlock(&chan->vchan.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void stm32_dma_issue_pending(struct dma_chan *c)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
if (!chan->busy) {
|
|
if (vchan_issue_pending(&chan->vchan) && !chan->desc) {
|
|
ret = stm32_dma_start_transfer(chan);
|
|
if ((!ret) && (chan->desc->cyclic))
|
|
stm32_dma_configure_next_sg(chan);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
}
|
|
|
|
static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
|
|
enum dma_transfer_direction direction,
|
|
enum dma_slave_buswidth *buswidth)
|
|
{
|
|
enum dma_slave_buswidth src_addr_width, dst_addr_width;
|
|
int src_bus_width, dst_bus_width;
|
|
int src_burst_size, dst_burst_size;
|
|
u32 src_maxburst, dst_maxburst;
|
|
dma_addr_t src_addr, dst_addr;
|
|
u32 dma_scr = 0;
|
|
|
|
src_addr_width = chan->dma_sconfig.src_addr_width;
|
|
dst_addr_width = chan->dma_sconfig.dst_addr_width;
|
|
src_maxburst = chan->dma_sconfig.src_maxburst;
|
|
dst_maxburst = chan->dma_sconfig.dst_maxburst;
|
|
src_addr = chan->dma_sconfig.src_addr;
|
|
dst_addr = chan->dma_sconfig.dst_addr;
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
dst_bus_width = stm32_dma_get_width(chan, dst_addr_width);
|
|
if (dst_bus_width < 0)
|
|
return dst_bus_width;
|
|
|
|
dst_burst_size = stm32_dma_get_burst(chan, dst_maxburst);
|
|
if (dst_burst_size < 0)
|
|
return dst_burst_size;
|
|
|
|
if (!src_addr_width)
|
|
src_addr_width = dst_addr_width;
|
|
|
|
src_bus_width = stm32_dma_get_width(chan, src_addr_width);
|
|
if (src_bus_width < 0)
|
|
return src_bus_width;
|
|
|
|
src_burst_size = stm32_dma_get_burst(chan, src_maxburst);
|
|
if (src_burst_size < 0)
|
|
return src_burst_size;
|
|
|
|
dma_scr = STM32_DMA_SCR_DIR(STM32_DMA_MEM_TO_DEV) |
|
|
STM32_DMA_SCR_PSIZE(dst_bus_width) |
|
|
STM32_DMA_SCR_MSIZE(src_bus_width) |
|
|
STM32_DMA_SCR_PBURST(dst_burst_size) |
|
|
STM32_DMA_SCR_MBURST(src_burst_size);
|
|
|
|
chan->chan_reg.dma_spar = chan->dma_sconfig.dst_addr;
|
|
*buswidth = dst_addr_width;
|
|
break;
|
|
|
|
case DMA_DEV_TO_MEM:
|
|
src_bus_width = stm32_dma_get_width(chan, src_addr_width);
|
|
if (src_bus_width < 0)
|
|
return src_bus_width;
|
|
|
|
src_burst_size = stm32_dma_get_burst(chan, src_maxburst);
|
|
if (src_burst_size < 0)
|
|
return src_burst_size;
|
|
|
|
if (!dst_addr_width)
|
|
dst_addr_width = src_addr_width;
|
|
|
|
dst_bus_width = stm32_dma_get_width(chan, dst_addr_width);
|
|
if (dst_bus_width < 0)
|
|
return dst_bus_width;
|
|
|
|
dst_burst_size = stm32_dma_get_burst(chan, dst_maxburst);
|
|
if (dst_burst_size < 0)
|
|
return dst_burst_size;
|
|
|
|
dma_scr = STM32_DMA_SCR_DIR(STM32_DMA_DEV_TO_MEM) |
|
|
STM32_DMA_SCR_PSIZE(src_bus_width) |
|
|
STM32_DMA_SCR_MSIZE(dst_bus_width) |
|
|
STM32_DMA_SCR_PBURST(src_burst_size) |
|
|
STM32_DMA_SCR_MBURST(dst_burst_size);
|
|
|
|
chan->chan_reg.dma_spar = chan->dma_sconfig.src_addr;
|
|
*buswidth = chan->dma_sconfig.src_addr_width;
|
|
break;
|
|
|
|
default:
|
|
dev_err(chan2dev(chan), "Dma direction is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
stm32_dma_set_fifo_config(chan, src_maxburst, dst_maxburst);
|
|
|
|
chan->chan_reg.dma_scr &= ~(STM32_DMA_SCR_DIR_MASK |
|
|
STM32_DMA_SCR_PSIZE_MASK | STM32_DMA_SCR_MSIZE_MASK |
|
|
STM32_DMA_SCR_PBURST_MASK | STM32_DMA_SCR_MBURST_MASK);
|
|
chan->chan_reg.dma_scr |= dma_scr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stm32_dma_clear_reg(struct stm32_dma_chan_reg *regs)
|
|
{
|
|
memset(regs, 0, sizeof(struct stm32_dma_chan_reg));
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
|
|
struct dma_chan *c, struct scatterlist *sgl,
|
|
u32 sg_len, enum dma_transfer_direction direction,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
struct stm32_dma_desc *desc;
|
|
struct scatterlist *sg;
|
|
enum dma_slave_buswidth buswidth;
|
|
u32 nb_data_items;
|
|
int i, ret;
|
|
|
|
if (!chan->config_init) {
|
|
dev_err(chan2dev(chan), "dma channel is not configured\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (sg_len < 1) {
|
|
dev_err(chan2dev(chan), "Invalid segment length %d\n", sg_len);
|
|
return NULL;
|
|
}
|
|
|
|
desc = stm32_dma_alloc_desc(sg_len);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
ret = stm32_dma_set_xfer_param(chan, direction, &buswidth);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Set peripheral flow controller */
|
|
if (chan->dma_sconfig.device_fc)
|
|
chan->chan_reg.dma_scr |= STM32_DMA_SCR_PFCTRL;
|
|
else
|
|
chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL;
|
|
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
desc->sg_req[i].len = sg_dma_len(sg);
|
|
|
|
nb_data_items = desc->sg_req[i].len / buswidth;
|
|
if (nb_data_items > STM32_DMA_MAX_DATA_ITEMS) {
|
|
dev_err(chan2dev(chan), "nb items not supported\n");
|
|
goto err;
|
|
}
|
|
|
|
stm32_dma_clear_reg(&desc->sg_req[i].chan_reg);
|
|
desc->sg_req[i].chan_reg.dma_scr = chan->chan_reg.dma_scr;
|
|
desc->sg_req[i].chan_reg.dma_sfcr = chan->chan_reg.dma_sfcr;
|
|
desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar;
|
|
desc->sg_req[i].chan_reg.dma_sm0ar = sg_dma_address(sg);
|
|
desc->sg_req[i].chan_reg.dma_sm1ar = sg_dma_address(sg);
|
|
desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items;
|
|
}
|
|
|
|
desc->num_sgs = sg_len;
|
|
desc->cyclic = false;
|
|
|
|
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
|
|
|
|
err:
|
|
kfree(desc);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *stm32_dma_prep_dma_cyclic(
|
|
struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
|
|
size_t period_len, enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
struct stm32_dma_desc *desc;
|
|
enum dma_slave_buswidth buswidth;
|
|
u32 num_periods, nb_data_items;
|
|
int i, ret;
|
|
|
|
if (!buf_len || !period_len) {
|
|
dev_err(chan2dev(chan), "Invalid buffer/period len\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (!chan->config_init) {
|
|
dev_err(chan2dev(chan), "dma channel is not configured\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (buf_len % period_len) {
|
|
dev_err(chan2dev(chan), "buf_len not multiple of period_len\n");
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* We allow to take more number of requests till DMA is
|
|
* not started. The driver will loop over all requests.
|
|
* Once DMA is started then new requests can be queued only after
|
|
* terminating the DMA.
|
|
*/
|
|
if (chan->busy) {
|
|
dev_err(chan2dev(chan), "Request not allowed when dma busy\n");
|
|
return NULL;
|
|
}
|
|
|
|
ret = stm32_dma_set_xfer_param(chan, direction, &buswidth);
|
|
if (ret < 0)
|
|
return NULL;
|
|
|
|
nb_data_items = period_len / buswidth;
|
|
if (nb_data_items > STM32_DMA_MAX_DATA_ITEMS) {
|
|
dev_err(chan2dev(chan), "number of items not supported\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* Enable Circular mode or double buffer mode */
|
|
if (buf_len == period_len)
|
|
chan->chan_reg.dma_scr |= STM32_DMA_SCR_CIRC;
|
|
else
|
|
chan->chan_reg.dma_scr |= STM32_DMA_SCR_DBM;
|
|
|
|
/* Clear periph ctrl if client set it */
|
|
chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL;
|
|
|
|
num_periods = buf_len / period_len;
|
|
|
|
desc = stm32_dma_alloc_desc(num_periods);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
for (i = 0; i < num_periods; i++) {
|
|
desc->sg_req[i].len = period_len;
|
|
|
|
stm32_dma_clear_reg(&desc->sg_req[i].chan_reg);
|
|
desc->sg_req[i].chan_reg.dma_scr = chan->chan_reg.dma_scr;
|
|
desc->sg_req[i].chan_reg.dma_sfcr = chan->chan_reg.dma_sfcr;
|
|
desc->sg_req[i].chan_reg.dma_spar = chan->chan_reg.dma_spar;
|
|
desc->sg_req[i].chan_reg.dma_sm0ar = buf_addr;
|
|
desc->sg_req[i].chan_reg.dma_sm1ar = buf_addr;
|
|
desc->sg_req[i].chan_reg.dma_sndtr = nb_data_items;
|
|
buf_addr += period_len;
|
|
}
|
|
|
|
desc->num_sgs = num_periods;
|
|
desc->cyclic = true;
|
|
|
|
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy(
|
|
struct dma_chan *c, dma_addr_t dest,
|
|
dma_addr_t src, size_t len, unsigned long flags)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
u32 num_sgs;
|
|
struct stm32_dma_desc *desc;
|
|
size_t xfer_count, offset;
|
|
int i;
|
|
|
|
num_sgs = DIV_ROUND_UP(len, STM32_DMA_MAX_DATA_ITEMS);
|
|
desc = stm32_dma_alloc_desc(num_sgs);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
for (offset = 0, i = 0; offset < len; offset += xfer_count, i++) {
|
|
xfer_count = min_t(size_t, len - offset,
|
|
STM32_DMA_MAX_DATA_ITEMS);
|
|
|
|
desc->sg_req[i].len = xfer_count;
|
|
|
|
stm32_dma_clear_reg(&desc->sg_req[i].chan_reg);
|
|
desc->sg_req[i].chan_reg.dma_scr =
|
|
STM32_DMA_SCR_DIR(STM32_DMA_MEM_TO_MEM) |
|
|
STM32_DMA_SCR_MINC |
|
|
STM32_DMA_SCR_PINC |
|
|
STM32_DMA_SCR_TCIE |
|
|
STM32_DMA_SCR_TEIE;
|
|
desc->sg_req[i].chan_reg.dma_sfcr = STM32_DMA_SFCR_DMDIS |
|
|
STM32_DMA_SFCR_FTH(STM32_DMA_FIFO_THRESHOLD_FULL) |
|
|
STM32_DMA_SFCR_FEIE;
|
|
desc->sg_req[i].chan_reg.dma_spar = src + offset;
|
|
desc->sg_req[i].chan_reg.dma_sm0ar = dest + offset;
|
|
desc->sg_req[i].chan_reg.dma_sndtr = xfer_count;
|
|
}
|
|
|
|
desc->num_sgs = num_sgs;
|
|
desc->cyclic = false;
|
|
|
|
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
|
|
}
|
|
|
|
static size_t stm32_dma_desc_residue(struct stm32_dma_chan *chan,
|
|
struct stm32_dma_desc *desc,
|
|
u32 next_sg)
|
|
{
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
u32 dma_scr, width, residue, count;
|
|
int i;
|
|
|
|
residue = 0;
|
|
|
|
for (i = next_sg; i < desc->num_sgs; i++)
|
|
residue += desc->sg_req[i].len;
|
|
|
|
if (next_sg != 0) {
|
|
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
|
|
width = STM32_DMA_SCR_PSIZE_GET(dma_scr);
|
|
count = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id));
|
|
|
|
residue += count << width;
|
|
}
|
|
|
|
return residue;
|
|
}
|
|
|
|
static enum dma_status stm32_dma_tx_status(struct dma_chan *c,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *state)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
struct virt_dma_desc *vdesc;
|
|
enum dma_status status;
|
|
unsigned long flags;
|
|
u32 residue;
|
|
|
|
status = dma_cookie_status(c, cookie, state);
|
|
if ((status == DMA_COMPLETE) || (!state))
|
|
return status;
|
|
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
vdesc = vchan_find_desc(&chan->vchan, cookie);
|
|
if (cookie == chan->desc->vdesc.tx.cookie) {
|
|
residue = stm32_dma_desc_residue(chan, chan->desc,
|
|
chan->next_sg);
|
|
} else if (vdesc) {
|
|
residue = stm32_dma_desc_residue(chan,
|
|
to_stm32_dma_desc(vdesc), 0);
|
|
} else {
|
|
residue = 0;
|
|
}
|
|
|
|
dma_set_residue(state, residue);
|
|
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int stm32_dma_alloc_chan_resources(struct dma_chan *c)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
int ret;
|
|
|
|
chan->config_init = false;
|
|
ret = clk_prepare_enable(dmadev->clk);
|
|
if (ret < 0) {
|
|
dev_err(chan2dev(chan), "clk_prepare_enable failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = stm32_dma_disable_chan(chan);
|
|
if (ret < 0)
|
|
clk_disable_unprepare(dmadev->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stm32_dma_free_chan_resources(struct dma_chan *c)
|
|
{
|
|
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
|
|
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
|
|
unsigned long flags;
|
|
|
|
dev_dbg(chan2dev(chan), "Freeing channel %d\n", chan->id);
|
|
|
|
if (chan->busy) {
|
|
spin_lock_irqsave(&chan->vchan.lock, flags);
|
|
stm32_dma_stop(chan);
|
|
chan->desc = NULL;
|
|
spin_unlock_irqrestore(&chan->vchan.lock, flags);
|
|
}
|
|
|
|
clk_disable_unprepare(dmadev->clk);
|
|
|
|
vchan_free_chan_resources(to_virt_chan(c));
|
|
}
|
|
|
|
static void stm32_dma_desc_free(struct virt_dma_desc *vdesc)
|
|
{
|
|
kfree(container_of(vdesc, struct stm32_dma_desc, vdesc));
|
|
}
|
|
|
|
void stm32_dma_set_config(struct stm32_dma_chan *chan,
|
|
struct stm32_dma_cfg *cfg)
|
|
{
|
|
stm32_dma_clear_reg(&chan->chan_reg);
|
|
|
|
chan->chan_reg.dma_scr = cfg->stream_config & STM32_DMA_SCR_CFG_MASK;
|
|
chan->chan_reg.dma_scr |= STM32_DMA_SCR_REQ(cfg->request_line);
|
|
|
|
/* Enable Interrupts */
|
|
chan->chan_reg.dma_scr |= STM32_DMA_SCR_TEIE | STM32_DMA_SCR_TCIE;
|
|
|
|
chan->chan_reg.dma_sfcr = cfg->threshold & STM32_DMA_SFCR_FTH_MASK;
|
|
}
|
|
|
|
static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct stm32_dma_device *dmadev = ofdma->of_dma_data;
|
|
struct stm32_dma_cfg cfg;
|
|
struct stm32_dma_chan *chan;
|
|
struct dma_chan *c;
|
|
|
|
if (dma_spec->args_count < 3)
|
|
return NULL;
|
|
|
|
cfg.channel_id = dma_spec->args[0];
|
|
cfg.request_line = dma_spec->args[1];
|
|
cfg.stream_config = dma_spec->args[2];
|
|
cfg.threshold = 0;
|
|
|
|
if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >=
|
|
STM32_DMA_MAX_REQUEST_ID))
|
|
return NULL;
|
|
|
|
if (dma_spec->args_count > 3)
|
|
cfg.threshold = dma_spec->args[3];
|
|
|
|
chan = &dmadev->chan[cfg.channel_id];
|
|
|
|
c = dma_get_slave_channel(&chan->vchan.chan);
|
|
if (c)
|
|
stm32_dma_set_config(chan, &cfg);
|
|
|
|
return c;
|
|
}
|
|
|
|
static const struct of_device_id stm32_dma_of_match[] = {
|
|
{ .compatible = "st,stm32-dma", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_dma_of_match);
|
|
|
|
static int stm32_dma_probe(struct platform_device *pdev)
|
|
{
|
|
struct stm32_dma_chan *chan;
|
|
struct stm32_dma_device *dmadev;
|
|
struct dma_device *dd;
|
|
const struct of_device_id *match;
|
|
struct resource *res;
|
|
int i, ret;
|
|
|
|
match = of_match_device(stm32_dma_of_match, &pdev->dev);
|
|
if (!match) {
|
|
dev_err(&pdev->dev, "Error: No device match found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
|
|
if (!dmadev)
|
|
return -ENOMEM;
|
|
|
|
dd = &dmadev->ddev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dmadev->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(dmadev->base))
|
|
return PTR_ERR(dmadev->base);
|
|
|
|
dmadev->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(dmadev->clk)) {
|
|
dev_err(&pdev->dev, "Error: Missing controller clock\n");
|
|
return PTR_ERR(dmadev->clk);
|
|
}
|
|
|
|
dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node,
|
|
"st,mem2mem");
|
|
|
|
dmadev->rst = devm_reset_control_get(&pdev->dev, NULL);
|
|
if (!IS_ERR(dmadev->rst)) {
|
|
reset_control_assert(dmadev->rst);
|
|
udelay(2);
|
|
reset_control_deassert(dmadev->rst);
|
|
}
|
|
|
|
dma_cap_set(DMA_SLAVE, dd->cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, dd->cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, dd->cap_mask);
|
|
dd->device_alloc_chan_resources = stm32_dma_alloc_chan_resources;
|
|
dd->device_free_chan_resources = stm32_dma_free_chan_resources;
|
|
dd->device_tx_status = stm32_dma_tx_status;
|
|
dd->device_issue_pending = stm32_dma_issue_pending;
|
|
dd->device_prep_slave_sg = stm32_dma_prep_slave_sg;
|
|
dd->device_prep_dma_cyclic = stm32_dma_prep_dma_cyclic;
|
|
dd->device_config = stm32_dma_slave_config;
|
|
dd->device_terminate_all = stm32_dma_terminate_all;
|
|
dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
|
|
dd->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
|
|
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
|
|
dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
|
|
dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
|
|
dd->dev = &pdev->dev;
|
|
INIT_LIST_HEAD(&dd->channels);
|
|
|
|
if (dmadev->mem2mem) {
|
|
dma_cap_set(DMA_MEMCPY, dd->cap_mask);
|
|
dd->device_prep_dma_memcpy = stm32_dma_prep_dma_memcpy;
|
|
dd->directions |= BIT(DMA_MEM_TO_MEM);
|
|
}
|
|
|
|
for (i = 0; i < STM32_DMA_MAX_CHANNELS; i++) {
|
|
chan = &dmadev->chan[i];
|
|
chan->id = i;
|
|
chan->vchan.desc_free = stm32_dma_desc_free;
|
|
vchan_init(&chan->vchan, dd);
|
|
}
|
|
|
|
ret = dma_async_device_register(dd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < STM32_DMA_MAX_CHANNELS; i++) {
|
|
chan = &dmadev->chan[i];
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
|
|
if (!res) {
|
|
ret = -EINVAL;
|
|
dev_err(&pdev->dev, "No irq resource for chan %d\n", i);
|
|
goto err_unregister;
|
|
}
|
|
chan->irq = res->start;
|
|
ret = devm_request_irq(&pdev->dev, chan->irq,
|
|
stm32_dma_chan_irq, 0,
|
|
dev_name(chan2dev(chan)), chan);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"request_irq failed with err %d channel %d\n",
|
|
ret, i);
|
|
goto err_unregister;
|
|
}
|
|
}
|
|
|
|
ret = of_dma_controller_register(pdev->dev.of_node,
|
|
stm32_dma_of_xlate, dmadev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"STM32 DMA DMA OF registration failed %d\n", ret);
|
|
goto err_unregister;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, dmadev);
|
|
|
|
dev_info(&pdev->dev, "STM32 DMA driver registered\n");
|
|
|
|
return 0;
|
|
|
|
err_unregister:
|
|
dma_async_device_unregister(dd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver stm32_dma_driver = {
|
|
.driver = {
|
|
.name = "stm32-dma",
|
|
.of_match_table = stm32_dma_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init stm32_dma_init(void)
|
|
{
|
|
return platform_driver_probe(&stm32_dma_driver, stm32_dma_probe);
|
|
}
|
|
subsys_initcall(stm32_dma_init);
|