linux/drivers/net/wireless/ath/ath9k
Rajkumar Manoharan 3ad9c3861a ath9k: use separate HW queue for each channel context
Use seperate tx queue for each AC in each channel context and expose
these information to mac80211 to avoid stopping one channel context
leads to stopping the entire traffic for that AC even on other contexts.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19 15:49:20 -04:00
..
ahb.c ath9k: fix race in setting ATH_OP_INVALID 2014-04-24 21:46:22 -04:00
ani.c ath9k_hw: do not lower ANI setting below default on AR913x 2014-04-30 11:39:54 -04:00
ani.h ath9k_hw: tweak noise immunity thresholds for older chipsets 2014-03-03 15:35:55 -05:00
antenna.c ath9k: add support for reporting per-chain signal strength 2013-12-18 15:23:19 -05:00
ar953x_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar955x_1p0_initvals.h ath9k: Remove AR955x INI duplicates 2013-12-09 15:37:57 -05:00
ar5008_initvals.h
ar5008_phy.c ath9k_hw: reduce ANI firstep range for older chips 2014-04-09 13:55:55 -04:00
ar9001_initvals.h
ar9002_calib.c ath9k_hw: remove IS_CHAN_B() 2013-10-14 13:39:58 -04:00
ar9002_hw.c ath9k: Register supported HW hang checks 2014-01-03 15:36:57 -05:00
ar9002_initvals.h ath9k: Enable WoW only for AR9462 2013-06-03 15:55:46 -04:00
ar9002_mac.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-01-06 14:08:41 -05:00
ar9002_phy.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
ar9002_phy.h ath9k: Program HW for WB195 diversity 2013-08-05 14:52:43 -04:00
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h ath9k: Use a separate TX gain table for WZR-HP-G450H 2013-12-09 15:37:58 -05:00
ar9003_calib.c ath9k: Calculate IQ-CAL median 2014-02-12 15:36:08 -05:00
ar9003_eeprom.c ath9k: Fix temperature compensation 2014-03-17 13:44:16 -04:00
ar9003_eeprom.h ath9k: Update BaseExtension_1 eeprom structure 2013-12-18 15:23:44 -05:00
ar9003_hw.c ath9k: Initialize QCA953x INI arrays 2014-01-03 15:37:00 -05:00
ar9003_mac.c ath9k: move ath9k_debug_sync_cause out of ath9k_hw 2013-12-19 14:41:56 -05:00
ar9003_mac.h
ar9003_mci.c ath9k: Use bitops for calibration flags 2013-09-26 15:13:47 -04:00
ar9003_mci.h
ar9003_paprd.c
ar9003_phy.c ath9k: do not set half/quarter channel flags in AR_PHY_MODE 2014-02-24 15:38:38 -05:00
ar9003_phy.h ath9k: Fix regulatory compliance 2014-01-03 15:37:01 -05:00
ar9003_rtt.c ath9k: Fix PeakDetect calibration for AR9462 2013-09-26 15:13:47 -04:00
ar9003_rtt.h
ar9003_wow.c ath9k: Fix wow.c compilation 2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h ath9k: Fix ETSI compliance for AR9462 2.0 2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h ath9k: Remove duplicate initvals for AR9462 v2.1 2013-12-02 14:25:02 -05:00
ar9485_initvals.h ath9k: Identify duplicate AR9485 initvals 2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h ath9k: Identify duplicate AR9565 v1.0 initvals 2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h ath9k: Add initvals for AR9565 1.1 2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ath9k.h ath9k: use separate HW queue for each channel context 2014-06-19 15:49:20 -04:00
beacon.c ath9k: Add periodic NoA support 2014-06-19 15:49:20 -04:00
btcoex.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
btcoex.h
calib.c ath9k: add noise floor parameter to ath9k_hw_getchan_noise 2013-10-18 14:03:53 -04:00
calib.h ath9k: add noise floor parameter to ath9k_hw_getchan_noise 2013-10-18 14:03:53 -04:00
channel.c ath9k: Add recovery mechanism for hw TSF timer 2014-06-19 15:49:20 -04:00
common-beacon.c ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-init.h ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common.c ath9k: move ath9k_rx_skb_postprocess to common.c 2014-02-12 15:36:01 -05:00
common.h ath9k-common: create common-debug and move modal_eeprom to cmn 2014-05-13 15:56:36 -04:00
debug_sta.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00
debug.c ath9k: Summarize hw state per channel context 2014-06-19 15:49:18 -04:00
debug.h ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
dfs_debug.c ath9k: dfs_debug fix possible NULL dereference 2013-11-11 14:42:43 -05:00
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.c ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.h ath9k/ath: move dfs pattern detector to ath 2013-10-18 14:03:54 -04:00
eeprom_4k.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_9287.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_def.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom.c
eeprom.h
gpio.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
hif_usb.c ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P 2014-02-12 15:36:04 -05:00
hif_usb.h
htc_drv_beacon.c ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init 2014-03-17 13:13:09 -04:00
htc_drv_debug.c ath9k_htc: use ath9k_cmn_debug_phy_err 2014-05-13 15:56:43 -04:00
htc_drv_gpio.c ath9k_htc: reconfigure led_gpios after resume 2013-12-18 15:23:02 -05:00
htc_drv_init.c ath9k_htc: sync beacon slot code with ath9k 2014-03-17 13:13:06 -04:00
htc_drv_main.c ath9k_htc: Stop ANI before doing hw_reset 2014-05-14 15:42:46 -04:00
htc_drv_txrx.c ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
htc_hst.c ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc_hst.h ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc.h ath9k: fixup "ath9k_htc: fix build with disabled debug" 2014-05-20 15:36:15 -04:00
hw-ops.h ath9k: Move private HW callbacks to hw-ops.h 2014-01-03 15:36:58 -05:00
hw.c ath9k: save tsf in channel context 2014-06-19 15:49:18 -04:00
hw.h ath9k: save tsf in channel context 2014-06-19 15:49:18 -04:00
init.c ath9k: use separate HW queue for each channel context 2014-06-19 15:49:20 -04:00
Kconfig ath9k: Remove ath9k rate control 2014-02-12 15:36:04 -05:00
link.c ath9k: Move beacon config to channel context 2014-06-19 15:49:18 -04:00
mac.c ath9k_hw: Abort transmission for sleeping station 2014-05-19 16:42:15 -04:00
mac.h ath9k_hw: Abort transmission for sleeping station 2014-05-19 16:42:15 -04:00
main.c ath9k: use separate HW queue for each channel context 2014-06-19 15:49:20 -04:00
Makefile ath9k: Add channel context structure 2014-06-19 15:49:16 -04:00
mci.c ath9k: Move caldata into channel context 2014-06-19 15:49:18 -04:00
mci.h
pci.c ath9k: Implement hw_scan support 2014-06-19 15:49:17 -04:00
phy.h ath9k: Fix diversity combining for AR9285 2013-07-24 11:02:39 -04:00
recv.c ath9k: Adjust AP beacon tsf based on station context 2014-06-19 15:49:19 -04:00
reg.h ath9k_hw: Abort transmission for sleeping station 2014-05-19 16:42:15 -04:00
spectral.c ath9k: fix sparse non static symbol warning 2014-01-03 15:36:56 -05:00
spectral.h ath9k: Cleanup spectral scan code 2013-12-18 15:23:37 -05:00
tx99.c ath9k: Implement channel context ops 2014-06-19 15:49:17 -04:00
wmi.c
wmi.h ath9k: mark wmi_event_swba as __packed 2013-09-26 15:13:48 -04:00
wow.c ath9k: Add channel context worker thread 2014-06-19 15:49:17 -04:00
xmit.c ath9k: use separate HW queue for each channel context 2014-06-19 15:49:20 -04:00