forked from Minki/linux
ed138c368d
The CFA-10055 is yet another breakout board for the CFA-10036, and is basically a CFA-10037, with the screen and LCD controller found on the CFA-10049. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
180 lines
4.5 KiB
Plaintext
180 lines
4.5 KiB
Plaintext
/*
|
|
* Copyright 2013 Crystalfontz America, Inc.
|
|
* Free Electrons
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/*
|
|
* The CFA-10055 is an expansion board for the CFA-10036 module and
|
|
* CFA-10037, thus we need to include the CFA-10037 DTS.
|
|
*/
|
|
/include/ "imx28-cfa10037.dts"
|
|
|
|
/ {
|
|
model = "Crystalfontz CFA-10055 Board";
|
|
compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
|
|
|
|
apb@80000000 {
|
|
apbh@80000000 {
|
|
pinctrl@80018000 {
|
|
pinctrl-names = "default", "default";
|
|
pinctrl-1 = <&hog_pins_cfa10055
|
|
&hog_pins_cfa10055_pullup>;
|
|
|
|
hog_pins_cfa10055: hog-10055@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
|
|
hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <1>;
|
|
};
|
|
|
|
spi2_pins_cfa10055: spi2-cfa10055@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
|
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
|
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
|
>;
|
|
fsl,drive-strength = <1>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <1>;
|
|
};
|
|
|
|
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
|
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
|
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
|
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
|
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
|
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
|
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
|
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
|
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
|
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
|
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
|
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
|
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
|
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
|
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
|
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
|
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
|
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
|
|
lcdif_pins_cfa10055: lcdif-evk@0 {
|
|
reg = <0>;
|
|
fsl,pinmux-ids = <
|
|
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
|
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
|
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
|
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
|
>;
|
|
fsl,drive-strength = <0>;
|
|
fsl,voltage = <1>;
|
|
fsl,pull-up = <0>;
|
|
};
|
|
};
|
|
|
|
lcdif@80030000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcdif_18bit_pins_cfa10055
|
|
&lcdif_pins_cfa10055>;
|
|
display = <&display>;
|
|
status = "okay";
|
|
|
|
display: display {
|
|
bits-per-pixel = <32>;
|
|
bus-width = <18>;
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing0 {
|
|
clock-frequency = <9216000>;
|
|
hactive = <320>;
|
|
vactive = <480>;
|
|
hback-porch = <2>;
|
|
hfront-porch = <2>;
|
|
vback-porch = <2>;
|
|
vfront-porch = <2>;
|
|
hsync-len = <15>;
|
|
vsync-len = <15>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
apbx@80040000 {
|
|
lradc@80050000 {
|
|
fsl,lradc-touchscreen-wires = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
pwm: pwm@80064000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3_pins_b>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
spi2 {
|
|
compatible = "spi-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_pins_cfa10055>;
|
|
status = "okay";
|
|
gpio-sck = <&gpio2 16 0>;
|
|
gpio-mosi = <&gpio2 17 0>;
|
|
gpio-miso = <&gpio2 18 0>;
|
|
cs-gpios = <&gpio3 5 0>;
|
|
num-chipselects = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hx8357: hx8357@0 {
|
|
compatible = "himax,hx8357b", "himax,hx8357";
|
|
reg = <0>;
|
|
spi-max-frequency = <100000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
gpios-reset = <&gpio3 30 0>;
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 3 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
};
|
|
};
|