linux/drivers/usb
George Cherian 371254ce46 usb: musb: dsps: Add the sw_babble_control() and Enable for newer silicon
Add sw_babble_control() logic to differentiate between transient
babble and real babble condition. Also add the SW babble control
register definitions.

Babble control register logic is implemented in the latest
revision of AM335x.

Find whether we are running on newer silicon. The babble control
register reads 0x4 by default in newer silicon as opposed to 0
in old versions of AM335x. Based on this enable the sw babble
control logic.

Signed-off-by: George Cherian <george.cherian@ti.com>
Tested-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16 10:00:02 -05:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: udc: update gadget states according to ch9 2014-05-23 11:36:44 +09:00
class USB: usbtmc: fix DMA on stack 2014-05-27 16:03:57 -07:00
common usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
core usb: fix hub-port pm_runtime_enable() vs runtime pm transitions 2014-06-17 17:04:39 -07:00
dwc2 usb: dwc2: Add function to calculate correct FIFO sizes 2014-05-27 15:42:42 -07:00
dwc3 usb: dwc3: omap: add dwc3_omap_extcon_register function 2014-07-16 09:57:11 -05:00
early
gadget usb: gadget: NCM: Stop RX TCP Bursts getting dropped. 2014-07-10 08:49:39 -05:00
host USB: EHCI: avoid BIOS handover on the HASEE E200 2014-06-17 17:05:49 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc USB: usbtest: add a timeout for scatter-gather tests 2014-06-17 17:05:50 -07:00
mon
musb usb: musb: dsps: Add the sw_babble_control() and Enable for newer silicon 2014-07-16 10:00:02 -05:00
phy usb: phy: am335x: Use SIMPLE_DEV_PM_OPS macro 2014-07-10 08:39:20 -05:00
renesas_usbhs usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting 2014-07-10 08:36:49 -05:00
serial Merge branch 'next' (accumulated 3.16 merge window patches) into master 2014-06-08 11:31:16 -07:00
storage USB: storage: ene_ub6250: Use kmemdup instead of kmalloc + memcpy 2014-05-27 16:23:44 -07:00
wusbcore USB: wusbcore: fix control-pipe directions 2014-05-27 15:04:10 -07:00
Kconfig usb: host: remove USB_ARCH_HAS_?HCI 2014-02-18 12:36:38 -08:00
Makefile usb: move usb/usb-common.c to usb/common/usb-common.c 2014-05-27 15:29:44 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.