linux/drivers/net/wireless/ath/ath10k
Michal Kazior 36d8230b7d ath10k: add extra check for frame tracing
Frames are logged via tracing in two slices:
header and payload, separately. This is done for
performance reasons when one wants to, e.g.
analyse metadata only of frames only.

If for some reason device delivered a frame buffer
which was sized below what 802.11 header implied
tracing logic would blow doing an invalid memory
accesses.

I've hit this problem when running IBSS on QCA988X
with 999.999.0.636 and tracing at the same time.

Fixes: 5ce8e7fdcc ("ath10k: handle ieee80211 header and payload tracing separately")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-17 09:33:48 +03:00
..
bmi.c ath10k: improve logging to include dev id 2014-08-26 19:04:48 +03:00
bmi.h ath10k: fix use of multiple blank lines 2014-09-18 10:45:20 +03:00
ce.c ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
ce.h ath10k: fix CE_DESC_FLAGS_META_DATA_LSB definition 2015-02-15 16:50:39 +02:00
core.c ath10k: change the fw stats access mask 2015-04-09 15:06:36 +03:00
core.h ath10k: change the fw stats access mask 2015-04-09 15:06:36 +03:00
debug.c ath10k: change the fw stats access mask 2015-04-09 15:06:36 +03:00
debug.h ath10k: Implement sta_add_debugfs 2015-01-13 16:13:13 +02:00
debugfs_sta.c ath10k: add support to send delba 2015-01-13 16:13:47 +02:00
hif.h ath10k: remove transfer_id from ath10k_hif_cb::tx_completion 2014-12-01 09:13:36 +02:00
htc.c ath10k: replenish htc tx credits always 2015-04-09 14:58:16 +03:00
htc.h ath10k: fix use of multiple blank lines 2014-09-18 10:45:20 +03:00
htt_rx.c ath10k: fix no-ack frame status 2015-04-09 15:11:30 +03:00
htt_tx.c ath10k: rework tx queue locking 2015-04-01 20:31:00 +03:00
htt.c ath10k: fix HTT op backwards compatibility for QCA6174 2015-03-30 14:56:06 +03:00
htt.h ath10k: fix no-ack frame status 2015-04-09 15:11:30 +03:00
hw.c ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
hw.h ath10k: allocate fw resources for iface combinations 2015-04-01 20:31:23 +03:00
Kconfig ath10k: ATH10K_DEBUGFS depends on DEBUG_FS 2014-09-10 14:17:45 +03:00
mac.c ath10k: use scan burst for hw roc 2015-04-15 15:07:39 +03:00
mac.h ath10k: implement tx pause wmi event 2015-04-01 20:31:08 +03:00
Makefile ath10k: add WOW disconnect/magic-packet support 2015-03-30 09:09:30 +03:00
p2p.c ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
p2p.h ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
pci.c ath10k: fix error handling in pci_probe 2015-04-17 09:32:40 +03:00
pci.h ath10k: fix target wakeup timeout 2015-01-29 12:26:28 +02:00
rx_desc.h ath10k: add hw rate definitions 2015-03-30 15:09:15 +03:00
spectral.c ath10k: introduce wmi ops 2014-12-08 17:39:08 +02:00
spectral.h ath10k: clean up phyerr code 2014-09-23 12:31:54 +03:00
targaddrs.h ath10k: add support for qca6174 2015-01-27 16:01:02 +02:00
testmode_i.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
testmode.c ath10k: introduce wmi ops 2014-12-08 17:39:08 +02:00
testmode.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
thermal.c ath10k: don't call quiet mode if it's not implemented 2015-04-01 20:21:17 +03:00
thermal.h ath10k: configure thermal throttle while powering up 2015-03-23 17:16:37 +02:00
trace.c
trace.h ath10k: add extra check for frame tracing 2015-04-17 09:33:48 +03:00
txrx.c ath10k: fix no-ack frame status 2015-04-09 15:11:30 +03:00
txrx.h ath10k: fix Rx aggregation reordering 2014-07-25 11:15:39 +03:00
wmi-ops.h ath10k: implement adaptive qcs command 2015-04-01 20:30:52 +03:00
wmi-tlv.c ath10k: use scan burst for hw roc 2015-04-15 15:07:39 +03:00
wmi-tlv.h ath10k: implement tx pause wmi event 2015-04-01 20:31:08 +03:00
wmi.c ath10k: implement adaptive qcs command 2015-04-01 20:30:52 +03:00
wmi.h ath10k: use scan burst for hw roc 2015-04-15 15:07:39 +03:00
wow.c ath10k: add WOW patterns support 2015-03-30 09:10:24 +03:00
wow.h ath10k: add WOW patterns support 2015-03-30 09:10:24 +03:00