forked from Minki/linux
353dfe1290
Firmware ignores Cardbus bridges, so when Linux assigns bus numbers, it must override firmware's notion of what the busses are numbered. This is not sufficient to support the Cardbus bridge as there is also no interrupt routing table entry for them. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> |
||
|---|---|---|
| .. | ||
| asp.c | ||
| ccio-dma.c | ||
| ccio-rm-dma.c | ||
| dino.c | ||
| eisa_eeprom.c | ||
| eisa_enumerator.c | ||
| eisa.c | ||
| gsc.c | ||
| gsc.h | ||
| hppb.c | ||
| iommu-helpers.h | ||
| iosapic_private.h | ||
| iosapic.c | ||
| Kconfig | ||
| lasi.c | ||
| lba_pci.c | ||
| led.c | ||
| Makefile | ||
| pdc_stable.c | ||
| power.c | ||
| README.dino | ||
| sba_iommu.c | ||
| superio.c | ||
| wax.c | ||
/* ** HP VISUALIZE Workstation PCI Bus Defect ** ** "HP has discovered a potential system defect that can affect ** the behavior of five models of HP VISUALIZE workstations when ** equipped with third-party or customer-installed PCI I/O expansion ** cards. The defect is limited to the HP C180, C160, C160L, B160L, ** and B132L VISUALIZE workstations, and will only be encountered ** when data is transmitted through PCI I/O expansion cards on the ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are ** not affected." ** ** REVISIT: "go/pci_defect" link below is stale. ** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> ** ** Product First Good Serial Number ** C200/C240 (US) US67350000 **B132L+/B180 (US) US67390000 ** C200 (Europe) 3713G01000 ** B180L (Europe) 3720G01000 ** ** Note that many boards were fixed/replaced under a free replacement ** program. Assume a machine is only "suspect" until proven otherwise. ** ** "The pci_check program will also be available as application ** patch PHSS_12295" */