forked from Minki/linux
cdd6c482c9
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
151 lines
4.8 KiB
Makefile
151 lines
4.8 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
|
|
|
|
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
|
|
|
|
ifeq ($(CONFIG_PPC64),y)
|
|
CFLAGS_prom_init.o += -mno-minimal-toc
|
|
endif
|
|
ifeq ($(CONFIG_PPC32),y)
|
|
CFLAGS_prom_init.o += -fPIC
|
|
CFLAGS_btext.o += -fPIC
|
|
endif
|
|
|
|
ifdef CONFIG_FUNCTION_TRACER
|
|
# Do not trace early boot code
|
|
CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
|
|
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
|
|
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
|
|
CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
|
|
# do not trace tracer code
|
|
CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
|
|
# timers used by tracing
|
|
CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
|
|
endif
|
|
|
|
obj-y := cputable.o ptrace.o syscalls.o \
|
|
irq.o align.o signal_32.o pmc.o vdso.o \
|
|
init_task.o process.o systbl.o idle.o \
|
|
signal.o sysfs.o cacheinfo.o
|
|
obj-y += vdso32/
|
|
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
|
|
signal_64.o ptrace32.o \
|
|
paca.o nvram_64.o firmware.o
|
|
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
|
|
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
|
|
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o
|
|
obj-$(CONFIG_PPC64) += vdso64/
|
|
obj-$(CONFIG_ALTIVEC) += vecemu.o
|
|
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
|
|
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
|
|
obj-$(CONFIG_PPC_CLOCK) += clock.o
|
|
procfs-$(CONFIG_PPC64) := proc_ppc64.o
|
|
obj-$(CONFIG_PROC_FS) += $(procfs-y)
|
|
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
|
|
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
|
|
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
|
|
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
|
|
obj-$(CONFIG_LPARCFG) += lparcfg.o
|
|
obj-$(CONFIG_IBMVIO) += vio.o
|
|
obj-$(CONFIG_IBMEBUS) += ibmebus.o
|
|
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
|
|
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
|
obj-$(CONFIG_E500) += idle_e500.o
|
|
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
|
|
obj-$(CONFIG_TAU) += tau_6xx.o
|
|
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \
|
|
swsusp_$(CONFIG_WORD_SIZE).o
|
|
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
|
|
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
|
|
obj-$(CONFIG_44x) += cpu_setup_44x.o
|
|
obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o
|
|
|
|
extra-y := head_$(CONFIG_WORD_SIZE).o
|
|
extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o
|
|
extra-$(CONFIG_40x) := head_40x.o
|
|
extra-$(CONFIG_44x) := head_44x.o
|
|
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
|
|
extra-$(CONFIG_8xx) := head_8xx.o
|
|
extra-y += vmlinux.lds
|
|
|
|
obj-y += time.o prom.o traps.o setup-common.o \
|
|
udbg.o misc.o io.o dma.o \
|
|
misc_$(CONFIG_WORD_SIZE).o
|
|
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
|
|
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
|
|
obj-$(CONFIG_KGDB) += kgdb.o
|
|
obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
|
|
obj-$(CONFIG_MODULES) += ppc_ksyms.o
|
|
obj-$(CONFIG_BOOTX_TEXT) += btext.o
|
|
obj-$(CONFIG_SMP) += smp.o
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
|
obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
|
|
|
|
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
|
|
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
|
|
pci-common.o pci_of_scan.o
|
|
obj-$(CONFIG_PCI_MSI) += msi.o
|
|
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
|
|
machine_kexec_$(CONFIG_WORD_SIZE).o
|
|
obj-$(CONFIG_AUDIT) += audit.o
|
|
obj64-$(CONFIG_AUDIT) += compat_audit.o
|
|
|
|
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
|
|
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
|
|
obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o perf_callchain.o
|
|
obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \
|
|
power5+-pmu.o power6-pmu.o power7-pmu.o
|
|
obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
|
|
|
|
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
|
|
|
|
ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
|
|
obj-y += iomap.o
|
|
endif
|
|
|
|
obj-$(CONFIG_PPC64) += $(obj64-y)
|
|
obj-$(CONFIG_PPC32) += $(obj32-y)
|
|
|
|
ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
|
|
obj-y += ppc_save_regs.o
|
|
endif
|
|
|
|
# Disable GCOV in odd or sensitive code
|
|
GCOV_PROFILE_prom_init.o := n
|
|
GCOV_PROFILE_ftrace.o := n
|
|
GCOV_PROFILE_machine_kexec_64.o := n
|
|
GCOV_PROFILE_machine_kexec_32.o := n
|
|
GCOV_PROFILE_kprobes.o := n
|
|
|
|
extra-$(CONFIG_PPC_FPU) += fpu.o
|
|
extra-$(CONFIG_ALTIVEC) += vector.o
|
|
extra-$(CONFIG_PPC64) += entry_64.o
|
|
|
|
extra-y += systbl_chk.i
|
|
$(obj)/systbl.o: systbl_chk
|
|
|
|
quiet_cmd_systbl_chk = CALL $<
|
|
cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
|
|
|
|
PHONY += systbl_chk
|
|
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
|
|
$(call cmd,systbl_chk)
|
|
|
|
ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
|
|
$(obj)/built-in.o: prom_init_check
|
|
|
|
quiet_cmd_prom_init_check = CALL $<
|
|
cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
|
|
|
|
PHONY += prom_init_check
|
|
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
|
|
$(call cmd,prom_init_check)
|
|
endif
|
|
|
|
clean-files := vmlinux.lds
|