linux/arch/arm
David Brownell 34f32c9701 usb: musb: make Davinci *work* in mainline
Now that the musb build fixes for DaVinci got merged (RC3?), kick in
the other bits needed to get it finally *working* in mainline:

 - Use clk_enable()/clk_disable() ... the "always enable USB clocks"
   code this originally relied on has since been removed.

 - Initialize the USB device only after the relevant I2C GPIOs are
   available, so the host side can properly enable VBUS.

 - Tweak init sequencing to cope with mainline's relatively late init
   of the I2C system bus for power switches, transceivers, and so on.

Sanity tested on DM6664 EVM for host and peripheral modes; that system
won't boot with CONFIG_PM enabled, so OTG can't yet be tested.  Also
verified on OMAP3.

(Unrelated:  correct the MODULE_PARM_DESC spelling of musb_debug.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 14:40:51 -08:00
..
boot Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2008-12-02 22:07:40 +00:00
common [ARM] clkdev: fix clock matching 2009-01-24 11:41:20 +00:00
configs [ARM] 5390/1: AT91: Watchdog fixes 2009-02-14 16:01:57 +00:00
include/asm byteorder: make swab.h include asm/swab.h like a regular header 2009-01-14 19:56:50 -08:00
kernel [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC 2009-02-19 14:45:27 +00:00
lib Merge branch 'clps7500' into devel 2008-11-27 12:39:43 +00:00
mach-aaec2000 arm: struct device - replace bus_id with dev_name(), dev_set_name() 2009-01-06 10:44:43 -08:00
mach-at91 [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller 2009-02-16 21:40:39 +00:00
mach-clps711x [ARM] clps711x: fix warning in edb7211-mm.c 2009-01-08 16:29:42 +00:00
mach-davinci usb: musb: make Davinci *work* in mainline 2009-02-27 14:40:51 -08:00
mach-ebsa110 [ARM] Hide ISA DMA API when ISA_DMA_API is unset 2008-11-29 18:42:40 +00:00
mach-ep93xx [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header 2009-02-19 16:13:02 +00:00
mach-footbridge Merge branch 'devel' 2009-01-08 22:01:49 +00:00
mach-h720x [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-imx [ARM] i.MX add missing include 2009-01-12 12:14:40 +01:00
mach-integrator libata-sff: fix incorrect EH message 2009-01-26 06:36:16 -05:00
mach-iop13xx [ARM] Hide ISA DMA API when ISA_DMA_API is unset 2008-11-29 18:42:40 +00:00
mach-iop32x [ARM] Hide ISA DMA API when ISA_DMA_API is unset 2008-11-29 18:42:40 +00:00
mach-iop33x [ARM] fix missing includes for iop33x and sa1100_ir 2008-12-01 23:01:19 +00:00
mach-ixp4xx Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip 2009-01-02 11:44:09 -08:00
mach-ixp23xx [ARM] Hide ISA DMA API when ISA_DMA_API is unset 2008-11-29 18:42:40 +00:00
mach-ixp2000 [ARM] Hide ISA DMA API when ISA_DMA_API is unset 2008-11-29 18:42:40 +00:00
mach-kirkwood [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
mach-ks8695 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-l7200 [ARM] Add a common typesafe __io implementation 2008-11-30 11:45:54 +00:00
mach-lh7a40x arm: struct device - replace bus_id with dev_name(), dev_set_name() 2009-01-06 10:44:43 -08:00
mach-loki [ARM] Hide ISA DMA API when ISA_DMA_API is unset 2008-11-29 18:42:40 +00:00
mach-msm [ARM] msm: fix build errors 2009-01-28 10:19:52 +00:00
mach-mv78xx0 [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
mach-mx1 [ARM] MXC: remove dependency to other include files from irqs.h 2008-12-18 16:40:11 +01:00
mach-mx2 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-mx3 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-netx [ARM] fix netx 2009-01-08 16:29:44 +00:00
mach-ns9xxx Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip 2009-01-02 11:44:09 -08:00
mach-omap1 ARM: OMAP: Fix hsmmc init, v2 2009-01-29 08:57:16 -08:00
mach-omap2 [ARM] omap: fix clock reparenting in omap2_clk_set_parent() 2009-02-19 13:25:16 +00:00
mach-orion5x [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
mach-pnx4008 [ARM] fix pnx4008 2009-01-08 16:29:43 +00:00
mach-pxa [ARM] pxa: stop and disable IRQ for each DMA channels at startup 2009-01-21 11:29:19 +08:00
mach-realview [ARM] Fix realview build 2009-01-08 16:29:41 +00:00
mach-rpc Add i2c_board_info for RiscPC PCF8583 2009-02-24 19:19:50 +01:00
mach-s3c24a0/include/mach [ARM] S3C24A0: Remove duplicate <mach/io.h> file 2008-12-18 16:35:59 +00:00
mach-s3c2400 [ARM] remove a common set of __virt_to_bus definitions 2008-11-28 15:36:49 +00:00
mach-s3c2410 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-s3c2412 [ARM] S3C: Remove unnecessary <linux/delay.h> includes 2008-12-18 16:36:02 +00:00
mach-s3c2440 [ARM] 5358/1: AT2440EVB: Use new include path of mci.h 2009-01-08 16:29:41 +00:00
mach-s3c2442 [ARM] Arrange for platforms to select appropriate CPU support 2008-11-27 12:38:00 +00:00
mach-s3c2443 [ARM] S3C: Remove unnecessary <linux/delay.h> includes 2008-12-18 16:36:02 +00:00
mach-s3c6400 [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
mach-s3c6410 Merge branch 'next-s3c64xx-device' into next-merged 2008-12-18 16:17:37 +00:00
mach-sa1100 rename platform_driver name "flash" to "sa1100-mtd" 2009-01-31 01:21:58 +01:00
mach-shark [ARM] Rename ISA mach/dma.h header to mach/isa-dma.h 2008-11-29 18:49:55 +00:00
mach-versatile arm: struct device - replace bus_id with dev_name(), dev_set_name() 2009-01-06 10:44:43 -08:00
mach-w90x900 [ARM] w90x900: fix build errors and warnings 2009-01-12 13:51:03 +00:00
mm [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() 2009-02-19 09:49:45 +00:00
nwfpe [ARM] Convert asm/uaccess.h to linux/uaccess.h 2008-09-06 11:35:55 +01:00
oprofile cpumask: make irq_set_affinity() take a const struct cpumask 2008-12-13 21:20:26 +10:30
plat-iop [ARM] iop: iop3xx needs registers mapped uncached+unbuffered 2008-11-09 11:18:36 +00:00
plat-mxc mmc: Add a MX2/MX3 specific SDHC driver 2009-02-02 20:57:05 +01:00
plat-omap ARM: OMAP: Fix hsmmc init, v2 2009-01-29 08:57:16 -08:00
plat-orion [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support 2009-02-17 22:37:09 +00:00
plat-s3c [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
plat-s3c24xx [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c 2009-01-08 16:29:42 +00:00
plat-s3c64xx [ARM] S3C64XX: Fix EINT group macro definition 2009-01-08 16:25:24 +00:00
tools [ARM] Update mach-types 2008-11-30 16:39:42 +00:00
vfp [ARM] 5349/1: VFP: Add PM code to save and restore current VFP state 2008-12-18 21:21:34 +00:00
Kconfig Staging: Kconfig for ARCH=arm,8300, cris 2009-01-06 13:51:38 -08:00
Kconfig-nommu
Kconfig.debug
Makefile Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2008-12-18 22:15:30 +00:00