forked from Minki/linux
2e4e98e788
Making static data const avoids allocation of additional r/w memory and reduces initialisation time. It also provides some additional opportunities for compiler optimisations. Signed-off-by: Lawrence Rust <lvr@softsystem.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
323 lines
8.7 KiB
C
323 lines
8.7 KiB
C
/*
|
|
*
|
|
* Stereo and SAP detection for cx88
|
|
*
|
|
* Copyright (c) 2009 Marton Balint <cus@fazekas.hu>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/jiffies.h>
|
|
#include <asm/div64.h>
|
|
|
|
#include "cx88.h"
|
|
#include "cx88-reg.h"
|
|
|
|
#define INT_PI ((s32)(3.141592653589 * 32768.0))
|
|
|
|
#define compat_remainder(a, b) \
|
|
((float)(((s32)((a)*100))%((s32)((b)*100)))/100.0)
|
|
|
|
#define baseband_freq(carrier, srate, tone) ((s32)( \
|
|
(compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
|
|
|
|
/* We calculate the baseband frequencies of the carrier and the pilot tones
|
|
* based on the the sampling rate of the audio rds fifo. */
|
|
|
|
#define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0)
|
|
#define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1)
|
|
#define FREQ_A2_STEREO baseband_freq(54687.5, 2689.36, 117.5)
|
|
|
|
/* The frequencies below are from the reference driver. They probably need
|
|
* further adjustments, because they are not tested at all. You may even need
|
|
* to play a bit with the registers of the chip to select the proper signal
|
|
* for the input of the audio rds fifo, and measure it's sampling rate to
|
|
* calculate the proper baseband frequencies... */
|
|
|
|
#define FREQ_A2M_CARRIER ((s32)(2.114516 * 32768.0))
|
|
#define FREQ_A2M_DUAL ((s32)(2.754916 * 32768.0))
|
|
#define FREQ_A2M_STEREO ((s32)(2.462326 * 32768.0))
|
|
|
|
#define FREQ_EIAJ_CARRIER ((s32)(1.963495 * 32768.0)) /* 5pi/8 */
|
|
#define FREQ_EIAJ_DUAL ((s32)(2.562118 * 32768.0))
|
|
#define FREQ_EIAJ_STEREO ((s32)(2.601053 * 32768.0))
|
|
|
|
#define FREQ_BTSC_DUAL ((s32)(1.963495 * 32768.0)) /* 5pi/8 */
|
|
#define FREQ_BTSC_DUAL_REF ((s32)(1.374446 * 32768.0)) /* 7pi/16 */
|
|
|
|
#define FREQ_BTSC_SAP ((s32)(2.471532 * 32768.0))
|
|
#define FREQ_BTSC_SAP_REF ((s32)(1.730072 * 32768.0))
|
|
|
|
/* The spectrum of the signal should be empty between these frequencies. */
|
|
#define FREQ_NOISE_START ((s32)(0.100000 * 32768.0))
|
|
#define FREQ_NOISE_END ((s32)(1.200000 * 32768.0))
|
|
|
|
static unsigned int dsp_debug;
|
|
module_param(dsp_debug, int, 0644);
|
|
MODULE_PARM_DESC(dsp_debug, "enable audio dsp debug messages");
|
|
|
|
#define dprintk(level, fmt, arg...) if (dsp_debug >= level) \
|
|
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
|
|
|
|
static s32 int_cos(u32 x)
|
|
{
|
|
u32 t2, t4, t6, t8;
|
|
s32 ret;
|
|
u16 period = x / INT_PI;
|
|
if (period % 2)
|
|
return -int_cos(x - INT_PI);
|
|
x = x % INT_PI;
|
|
if (x > INT_PI/2)
|
|
return -int_cos(INT_PI/2 - (x % (INT_PI/2)));
|
|
/* Now x is between 0 and INT_PI/2.
|
|
* To calculate cos(x) we use it's Taylor polinom. */
|
|
t2 = x*x/32768/2;
|
|
t4 = t2*x/32768*x/32768/3/4;
|
|
t6 = t4*x/32768*x/32768/5/6;
|
|
t8 = t6*x/32768*x/32768/7/8;
|
|
ret = 32768-t2+t4-t6+t8;
|
|
return ret;
|
|
}
|
|
|
|
static u32 int_goertzel(s16 x[], u32 N, u32 freq)
|
|
{
|
|
/* We use the Goertzel algorithm to determine the power of the
|
|
* given frequency in the signal */
|
|
s32 s_prev = 0;
|
|
s32 s_prev2 = 0;
|
|
s32 coeff = 2*int_cos(freq);
|
|
u32 i;
|
|
|
|
u64 tmp;
|
|
u32 divisor;
|
|
|
|
for (i = 0; i < N; i++) {
|
|
s32 s = x[i] + ((s64)coeff*s_prev/32768) - s_prev2;
|
|
s_prev2 = s_prev;
|
|
s_prev = s;
|
|
}
|
|
|
|
tmp = (s64)s_prev2 * s_prev2 + (s64)s_prev * s_prev -
|
|
(s64)coeff * s_prev2 * s_prev / 32768;
|
|
|
|
/* XXX: N must be low enough so that N*N fits in s32.
|
|
* Else we need two divisions. */
|
|
divisor = N * N;
|
|
do_div(tmp, divisor);
|
|
|
|
return (u32) tmp;
|
|
}
|
|
|
|
static u32 freq_magnitude(s16 x[], u32 N, u32 freq)
|
|
{
|
|
u32 sum = int_goertzel(x, N, freq);
|
|
return (u32)int_sqrt(sum);
|
|
}
|
|
|
|
static u32 noise_magnitude(s16 x[], u32 N, u32 freq_start, u32 freq_end)
|
|
{
|
|
int i;
|
|
u32 sum = 0;
|
|
u32 freq_step;
|
|
int samples = 5;
|
|
|
|
if (N > 192) {
|
|
/* The last 192 samples are enough for noise detection */
|
|
x += (N-192);
|
|
N = 192;
|
|
}
|
|
|
|
freq_step = (freq_end - freq_start) / (samples - 1);
|
|
|
|
for (i = 0; i < samples; i++) {
|
|
sum += int_goertzel(x, N, freq_start);
|
|
freq_start += freq_step;
|
|
}
|
|
|
|
return (u32)int_sqrt(sum / samples);
|
|
}
|
|
|
|
static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
|
|
{
|
|
s32 carrier, stereo, dual, noise;
|
|
s32 carrier_freq, stereo_freq, dual_freq;
|
|
s32 ret;
|
|
|
|
switch (core->tvaudio) {
|
|
case WW_BG:
|
|
case WW_DK:
|
|
carrier_freq = FREQ_A2_CARRIER;
|
|
stereo_freq = FREQ_A2_STEREO;
|
|
dual_freq = FREQ_A2_DUAL;
|
|
break;
|
|
case WW_M:
|
|
carrier_freq = FREQ_A2M_CARRIER;
|
|
stereo_freq = FREQ_A2M_STEREO;
|
|
dual_freq = FREQ_A2M_DUAL;
|
|
break;
|
|
case WW_EIAJ:
|
|
carrier_freq = FREQ_EIAJ_CARRIER;
|
|
stereo_freq = FREQ_EIAJ_STEREO;
|
|
dual_freq = FREQ_EIAJ_DUAL;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s/0: unsupported audio mode %d for %s\n",
|
|
core->name, core->tvaudio, __func__);
|
|
return UNSET;
|
|
}
|
|
|
|
carrier = freq_magnitude(x, N, carrier_freq);
|
|
stereo = freq_magnitude(x, N, stereo_freq);
|
|
dual = freq_magnitude(x, N, dual_freq);
|
|
noise = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
|
|
|
|
dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, "
|
|
"noise=%d\n", carrier, stereo, dual, noise);
|
|
|
|
if (stereo > dual)
|
|
ret = V4L2_TUNER_SUB_STEREO;
|
|
else
|
|
ret = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
|
|
|
|
if (core->tvaudio == WW_EIAJ) {
|
|
/* EIAJ checks may need adjustments */
|
|
if ((carrier > max(stereo, dual)*2) &&
|
|
(carrier < max(stereo, dual)*6) &&
|
|
(carrier > 20 && carrier < 200) &&
|
|
(max(stereo, dual) > min(stereo, dual))) {
|
|
/* For EIAJ the carrier is always present,
|
|
so we probably don't need noise detection */
|
|
return ret;
|
|
}
|
|
} else {
|
|
if ((carrier > max(stereo, dual)*2) &&
|
|
(carrier < max(stereo, dual)*8) &&
|
|
(carrier > 20 && carrier < 200) &&
|
|
(noise < 10) &&
|
|
(max(stereo, dual) > min(stereo, dual)*2)) {
|
|
return ret;
|
|
}
|
|
}
|
|
return V4L2_TUNER_SUB_MONO;
|
|
}
|
|
|
|
static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
|
|
{
|
|
s32 sap_ref = freq_magnitude(x, N, FREQ_BTSC_SAP_REF);
|
|
s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
|
|
s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
|
|
s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
|
|
dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d"
|
|
"\n", dual_ref, dual, sap_ref, sap);
|
|
/* FIXME: Currently not supported */
|
|
return UNSET;
|
|
}
|
|
|
|
static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
|
|
{
|
|
const struct sram_channel *srch = &cx88_sram_channels[SRAM_CH27];
|
|
s16 *samples;
|
|
|
|
unsigned int i;
|
|
unsigned int bpl = srch->fifo_size/AUD_RDS_LINES;
|
|
unsigned int spl = bpl/4;
|
|
unsigned int sample_count = spl*(AUD_RDS_LINES-1);
|
|
|
|
u32 current_address = cx_read(srch->ptr1_reg);
|
|
u32 offset = (current_address - srch->fifo_start + bpl);
|
|
|
|
dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), "
|
|
"sample_count=%d, aud_intstat=%08x\n", current_address,
|
|
current_address - srch->fifo_start, sample_count,
|
|
cx_read(MO_AUD_INTSTAT));
|
|
|
|
samples = kmalloc(sizeof(s16)*sample_count, GFP_KERNEL);
|
|
if (!samples)
|
|
return NULL;
|
|
|
|
*N = sample_count;
|
|
|
|
for (i = 0; i < sample_count; i++) {
|
|
offset = offset % (AUD_RDS_LINES*bpl);
|
|
samples[i] = cx_read(srch->fifo_start + offset);
|
|
offset += 4;
|
|
}
|
|
|
|
if (dsp_debug >= 2) {
|
|
dprintk(2, "RDS samples dump: ");
|
|
for (i = 0; i < sample_count; i++)
|
|
printk("%hd ", samples[i]);
|
|
printk(".\n");
|
|
}
|
|
|
|
return samples;
|
|
}
|
|
|
|
s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core)
|
|
{
|
|
s16 *samples;
|
|
u32 N = 0;
|
|
s32 ret = UNSET;
|
|
|
|
/* If audio RDS fifo is disabled, we can't read the samples */
|
|
if (!(cx_read(MO_AUD_DMACNTRL) & 0x04))
|
|
return ret;
|
|
if (!(cx_read(AUD_CTL) & EN_FMRADIO_EN_RDS))
|
|
return ret;
|
|
|
|
/* Wait at least 500 ms after an audio standard change */
|
|
if (time_before(jiffies, core->last_change + msecs_to_jiffies(500)))
|
|
return ret;
|
|
|
|
samples = read_rds_samples(core, &N);
|
|
|
|
if (!samples)
|
|
return ret;
|
|
|
|
switch (core->tvaudio) {
|
|
case WW_BG:
|
|
case WW_DK:
|
|
case WW_EIAJ:
|
|
case WW_M:
|
|
ret = detect_a2_a2m_eiaj(core, samples, N);
|
|
break;
|
|
case WW_BTSC:
|
|
ret = detect_btsc(core, samples, N);
|
|
break;
|
|
case WW_NONE:
|
|
case WW_I:
|
|
case WW_L:
|
|
case WW_I2SPT:
|
|
case WW_FM:
|
|
case WW_I2SADC:
|
|
break;
|
|
}
|
|
|
|
kfree(samples);
|
|
|
|
if (UNSET != ret)
|
|
dprintk(1, "stereo/sap detection result:%s%s%s\n",
|
|
(ret & V4L2_TUNER_SUB_MONO) ? " mono" : "",
|
|
(ret & V4L2_TUNER_SUB_STEREO) ? " stereo" : "",
|
|
(ret & V4L2_TUNER_SUB_LANG2) ? " dual" : "");
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(cx88_dsp_detect_stereo_sap);
|
|
|