linux/arch/alpha/kernel/sys_rx164.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

221 lines
5.3 KiB
C

/*
* linux/arch/alpha/kernel/sys_rx164.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996 Jay A Estabrook
* Copyright (C) 1998, 1999 Richard Henderson
*
* Code supporting the RX164 (PCA56+POLARIS).
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_polaris.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
/* Note mask bit is true for ENABLED irqs. */
static unsigned long cached_irq_mask;
static inline void
rx164_update_irq_hw(unsigned long mask)
{
volatile unsigned int *irq_mask;
irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74);
*irq_mask = mask;
mb();
*irq_mask;
}
static inline void
rx164_enable_irq(unsigned int irq)
{
rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
}
static void
rx164_disable_irq(unsigned int irq)
{
rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
}
static unsigned int
rx164_startup_irq(unsigned int irq)
{
rx164_enable_irq(irq);
return 0;
}
static void
rx164_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
rx164_enable_irq(irq);
}
static struct hw_interrupt_type rx164_irq_type = {
.typename = "RX164",
.startup = rx164_startup_irq,
.shutdown = rx164_disable_irq,
.enable = rx164_enable_irq,
.disable = rx164_disable_irq,
.ack = rx164_disable_irq,
.end = rx164_end_irq,
};
static void
rx164_device_interrupt(unsigned long vector, struct pt_regs *regs)
{
unsigned long pld;
volatile unsigned int *dirr;
long i;
/* Read the interrupt summary register. On Polaris, this is
the DIRR register in PCI config space (offset 0x84). */
dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84);
pld = *dirr;
/*
* Now for every possible bit set, work through them and call
* the appropriate interrupt handler.
*/
while (pld) {
i = ffz(~pld);
pld &= pld - 1; /* clear least bit set */
if (i == 20) {
isa_no_iack_sc_device_interrupt(vector, regs);
} else {
handle_irq(16+i, regs);
}
}
}
static void __init
rx164_init_irq(void)
{
long i;
rx164_update_irq_hw(0);
for (i = 16; i < 40; ++i) {
irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
irq_desc[i].handler = &rx164_irq_type;
}
init_i8259a_irqs();
common_init_isa_dma();
setup_irq(16+20, &isa_cascade_irqaction);
}
/*
* The RX164 changed its interrupt routing between pass1 and pass2...
*
* PASS1:
*
* Slot IDSEL INTA INTB INTC INTD
* 0 6 5 10 15 20
* 1 7 4 9 14 19
* 2 5 3 8 13 18
* 3 9 2 7 12 17
* 4 10 1 6 11 16
*
* PASS2:
* Slot IDSEL INTA INTB INTC INTD
* 0 5 1 7 12 17
* 1 6 2 8 13 18
* 2 8 3 9 14 19
* 3 9 4 10 15 20
* 4 10 5 11 16 6
*
*/
/*
* IdSel
* 5 32 bit PCI option slot 0
* 6 64 bit PCI option slot 1
* 7 PCI-ISA bridge
* 7 64 bit PCI option slot 2
* 9 32 bit PCI option slot 3
* 10 PCI-PCI bridge
*
*/
static int __init
rx164_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
#if 0
static char irq_tab_pass1[6][5] __initdata = {
/*INT INTA INTB INTC INTD */
{ 16+3, 16+3, 16+8, 16+13, 16+18}, /* IdSel 5, slot 2 */
{ 16+5, 16+5, 16+10, 16+15, 16+20}, /* IdSel 6, slot 0 */
{ 16+4, 16+4, 16+9, 16+14, 16+19}, /* IdSel 7, slot 1 */
{ -1, -1, -1, -1, -1}, /* IdSel 8, PCI/ISA bridge */
{ 16+2, 16+2, 16+7, 16+12, 16+17}, /* IdSel 9, slot 3 */
{ 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */
};
#else
static char irq_tab[6][5] __initdata = {
/*INT INTA INTB INTC INTD */
{ 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */
{ 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */
{ -1, -1, -1, -1, -1}, /* IdSel 7, PCI/ISA bridge */
{ 16+2, 16+2, 16+8, 16+13, 16+18}, /* IdSel 8, slot 2 */
{ 16+3, 16+3, 16+9, 16+14, 16+19}, /* IdSel 9, slot 3 */
{ 16+4, 16+4, 16+10, 16+15, 16+5}, /* IdSel 10, PCI-PCI */
};
#endif
const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
/* JRP - Need to figure out how to distinguish pass1 from pass2,
and use the correct table. */
return COMMON_TABLE_LOOKUP;
}
/*
* The System Vector
*/
struct alpha_machine_vector rx164_mv __initmv = {
.vector_name = "RX164",
DO_EV5_MMU,
DO_DEFAULT_RTC,
DO_POLARIS_IO,
.machine_check = polaris_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.nr_irqs = 40,
.device_interrupt = rx164_device_interrupt,
.init_arch = polaris_init_arch,
.init_irq = rx164_init_irq,
.init_rtc = common_init_rtc,
.init_pci = common_init_pci,
.kill_arch = NULL,
.pci_map_irq = rx164_map_irq,
.pci_swizzle = common_swizzle,
};
ALIAS_MV(rx164)