forked from Minki/linux
8756dd924d
Otherwise GCC will mark the .init.rodata section R/W, which causes a compile error once we add other real R/O data. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
414 lines
9.9 KiB
C
414 lines
9.9 KiB
C
/*
|
|
* Copyright 2011-2013 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/export.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/system_misc.h>
|
|
|
|
#include "common.h"
|
|
#include "cpuidle.h"
|
|
#include "hardware.h"
|
|
|
|
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
|
|
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
|
|
{
|
|
if (IS_BUILTIN(CONFIG_PHYLIB)) {
|
|
/* min rx data delay */
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
|
|
|
|
/* max rx/tx clock delay, min rx/tx control delay */
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
|
|
phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
|
|
MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
|
|
{
|
|
phy_write(dev, 0x0d, device);
|
|
phy_write(dev, 0x0e, reg);
|
|
phy_write(dev, 0x0d, (1 << 14) | device);
|
|
phy_write(dev, 0x0e, val);
|
|
}
|
|
|
|
static int ksz9031rn_phy_fixup(struct phy_device *dev)
|
|
{
|
|
/*
|
|
* min rx data delay, max rx/tx clock delay,
|
|
* min rx/tx control delay
|
|
*/
|
|
mmd_write_reg(dev, 2, 4, 0);
|
|
mmd_write_reg(dev, 2, 5, 0);
|
|
mmd_write_reg(dev, 2, 8, 0x003ff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
|
|
* as they are used for slots1-7 PERST#
|
|
*/
|
|
static void ventana_pciesw_early_fixup(struct pci_dev *dev)
|
|
{
|
|
u32 dw;
|
|
|
|
if (!of_machine_is_compatible("gw,ventana"))
|
|
return;
|
|
|
|
if (dev->devfn != 0)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0x62c, &dw);
|
|
dw |= 0xaaa8; // GPIO1-7 outputs
|
|
pci_write_config_dword(dev, 0x62c, dw);
|
|
|
|
pci_read_config_dword(dev, 0x644, &dw);
|
|
dw |= 0xfe; // GPIO1-7 output high
|
|
pci_write_config_dword(dev, 0x644, dw);
|
|
|
|
msleep(100);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
|
|
|
|
static int ar8031_phy_fixup(struct phy_device *dev)
|
|
{
|
|
u16 val;
|
|
|
|
/* To enable AR8031 output a 125MHz clk from CLK_25M */
|
|
phy_write(dev, 0xd, 0x7);
|
|
phy_write(dev, 0xe, 0x8016);
|
|
phy_write(dev, 0xd, 0x4007);
|
|
|
|
val = phy_read(dev, 0xe);
|
|
val &= 0xffe3;
|
|
val |= 0x18;
|
|
phy_write(dev, 0xe, val);
|
|
|
|
/* introduce tx clock delay */
|
|
phy_write(dev, 0x1d, 0x5);
|
|
val = phy_read(dev, 0x1e);
|
|
val |= 0x0100;
|
|
phy_write(dev, 0x1e, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PHY_ID_AR8031 0x004dd074
|
|
|
|
static int ar8035_phy_fixup(struct phy_device *dev)
|
|
{
|
|
u16 val;
|
|
|
|
/* Ar803x phy SmartEEE feature cause link status generates glitch,
|
|
* which cause ethernet link down/up issue, so disable SmartEEE
|
|
*/
|
|
phy_write(dev, 0xd, 0x3);
|
|
phy_write(dev, 0xe, 0x805d);
|
|
phy_write(dev, 0xd, 0x4003);
|
|
|
|
val = phy_read(dev, 0xe);
|
|
phy_write(dev, 0xe, val & ~(1 << 8));
|
|
|
|
/*
|
|
* Enable 125MHz clock from CLK_25M on the AR8031. This
|
|
* is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
|
|
* Also, introduce a tx clock delay.
|
|
*
|
|
* This is the same as is the AR8031 fixup.
|
|
*/
|
|
ar8031_phy_fixup(dev);
|
|
|
|
/*check phy power*/
|
|
val = phy_read(dev, 0x0);
|
|
if (val & BMCR_PDOWN)
|
|
phy_write(dev, 0x0, val & ~BMCR_PDOWN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PHY_ID_AR8035 0x004dd072
|
|
|
|
static void __init imx6q_enet_phy_init(void)
|
|
{
|
|
if (IS_BUILTIN(CONFIG_PHYLIB)) {
|
|
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
|
|
ksz9021rn_phy_fixup);
|
|
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
|
|
ksz9031rn_phy_fixup);
|
|
phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
|
|
ar8031_phy_fixup);
|
|
phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
|
|
ar8035_phy_fixup);
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_1588_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct clk *ptp_clk;
|
|
struct clk *enet_ref;
|
|
struct regmap *gpr;
|
|
u32 clksel;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
|
|
if (!np) {
|
|
pr_warn("%s: failed to find fec node\n", __func__);
|
|
return;
|
|
}
|
|
|
|
ptp_clk = of_clk_get(np, 2);
|
|
if (IS_ERR(ptp_clk)) {
|
|
pr_warn("%s: failed to get ptp clock\n", __func__);
|
|
goto put_node;
|
|
}
|
|
|
|
enet_ref = clk_get_sys(NULL, "enet_ref");
|
|
if (IS_ERR(enet_ref)) {
|
|
pr_warn("%s: failed to get enet clock\n", __func__);
|
|
goto put_ptp_clk;
|
|
}
|
|
|
|
/*
|
|
* If enet_ref from ANATOP/CCM is the PTP clock source, we need to
|
|
* set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad
|
|
* (external OSC), and we need to clear the bit.
|
|
*/
|
|
clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
|
|
IMX6Q_GPR1_ENET_CLK_SEL_PAD;
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (!IS_ERR(gpr))
|
|
regmap_update_bits(gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_ENET_CLK_SEL_MASK,
|
|
clksel);
|
|
else
|
|
pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
|
|
|
|
clk_put(enet_ref);
|
|
put_ptp_clk:
|
|
clk_put(ptp_clk);
|
|
put_node:
|
|
of_node_put(np);
|
|
}
|
|
|
|
static void __init imx6q_axi_init(void)
|
|
{
|
|
struct regmap *gpr;
|
|
unsigned int mask;
|
|
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (!IS_ERR(gpr)) {
|
|
/*
|
|
* Enable the cacheable attribute of VPU and IPU
|
|
* AXI transactions.
|
|
*/
|
|
mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
|
|
IMX6Q_GPR4_VPU_RD_CACHE_SEL |
|
|
IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
|
|
IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
|
|
IMX6Q_GPR4_IPU_WR_CACHE_CTL |
|
|
IMX6Q_GPR4_IPU_RD_CACHE_CTL;
|
|
regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
|
|
|
|
/* Increase IPU read QoS priority */
|
|
regmap_update_bits(gpr, IOMUXC_GPR6,
|
|
IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
|
|
IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
|
|
(0xf << 16) | (0x7 << 20));
|
|
regmap_update_bits(gpr, IOMUXC_GPR7,
|
|
IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
|
|
IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
|
|
(0xf << 16) | (0x7 << 20));
|
|
} else {
|
|
pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_init_machine(void)
|
|
{
|
|
struct device *parent;
|
|
|
|
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
|
|
imx_get_soc_revision());
|
|
|
|
mxc_arch_reset_init_dt();
|
|
|
|
parent = imx_soc_device_init();
|
|
if (parent == NULL)
|
|
pr_warn("failed to initialize soc device\n");
|
|
|
|
imx6q_enet_phy_init();
|
|
|
|
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
|
|
|
|
imx_anatop_init();
|
|
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
|
|
imx6q_1588_init();
|
|
imx6q_axi_init();
|
|
}
|
|
|
|
#define OCOTP_CFG3 0x440
|
|
#define OCOTP_CFG3_SPEED_SHIFT 16
|
|
#define OCOTP_CFG3_SPEED_1P2GHZ 0x3
|
|
#define OCOTP_CFG3_SPEED_996MHZ 0x2
|
|
#define OCOTP_CFG3_SPEED_852MHZ 0x1
|
|
|
|
static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *base;
|
|
u32 val;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
|
|
if (!np) {
|
|
pr_warn("failed to find ocotp node\n");
|
|
return;
|
|
}
|
|
|
|
base = of_iomap(np, 0);
|
|
if (!base) {
|
|
pr_warn("failed to map ocotp\n");
|
|
goto put_node;
|
|
}
|
|
|
|
/*
|
|
* SPEED_GRADING[1:0] defines the max speed of ARM:
|
|
* 2b'11: 1200000000Hz;
|
|
* 2b'10: 996000000Hz;
|
|
* 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
|
|
* 2b'00: 792000000Hz;
|
|
* We need to set the max speed of ARM according to fuse map.
|
|
*/
|
|
val = readl_relaxed(base + OCOTP_CFG3);
|
|
val >>= OCOTP_CFG3_SPEED_SHIFT;
|
|
val &= 0x3;
|
|
|
|
if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q())
|
|
if (dev_pm_opp_disable(cpu_dev, 1200000000))
|
|
pr_warn("failed to disable 1.2 GHz OPP\n");
|
|
if (val < OCOTP_CFG3_SPEED_996MHZ)
|
|
if (dev_pm_opp_disable(cpu_dev, 996000000))
|
|
pr_warn("failed to disable 996 MHz OPP\n");
|
|
if (cpu_is_imx6q()) {
|
|
if (val != OCOTP_CFG3_SPEED_852MHZ)
|
|
if (dev_pm_opp_disable(cpu_dev, 852000000))
|
|
pr_warn("failed to disable 852 MHz OPP\n");
|
|
}
|
|
|
|
put_node:
|
|
of_node_put(np);
|
|
}
|
|
|
|
static void __init imx6q_opp_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct device *cpu_dev = get_cpu_device(0);
|
|
|
|
if (!cpu_dev) {
|
|
pr_warn("failed to get cpu0 device\n");
|
|
return;
|
|
}
|
|
np = of_node_get(cpu_dev->of_node);
|
|
if (!np) {
|
|
pr_warn("failed to find cpu0 node\n");
|
|
return;
|
|
}
|
|
|
|
if (of_init_opp_table(cpu_dev)) {
|
|
pr_warn("failed to init OPP table\n");
|
|
goto put_node;
|
|
}
|
|
|
|
imx6q_opp_check_speed_grading(cpu_dev);
|
|
|
|
put_node:
|
|
of_node_put(np);
|
|
}
|
|
|
|
static struct platform_device imx6q_cpufreq_pdev = {
|
|
.name = "imx6q-cpufreq",
|
|
};
|
|
|
|
static void __init imx6q_init_late(void)
|
|
{
|
|
/*
|
|
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
|
|
* to run cpuidle on them.
|
|
*/
|
|
if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
|
|
imx6q_cpuidle_init();
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
|
|
imx6q_opp_init();
|
|
platform_device_register(&imx6q_cpufreq_pdev);
|
|
}
|
|
}
|
|
|
|
static void __init imx6q_map_io(void)
|
|
{
|
|
debug_ll_io_init();
|
|
imx_scu_map_io();
|
|
}
|
|
|
|
static void __init imx6q_init_irq(void)
|
|
{
|
|
imx_init_revision_from_anatop();
|
|
imx_init_l2cache();
|
|
imx_src_init();
|
|
imx_gpc_init();
|
|
irqchip_init();
|
|
}
|
|
|
|
static const char * const imx6q_dt_compat[] __initconst = {
|
|
"fsl,imx6dl",
|
|
"fsl,imx6q",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
|
|
.smp = smp_ops(imx_smp_ops),
|
|
.map_io = imx6q_map_io,
|
|
.init_irq = imx6q_init_irq,
|
|
.init_machine = imx6q_init_machine,
|
|
.init_late = imx6q_init_late,
|
|
.dt_compat = imx6q_dt_compat,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|