b735f41dcb
Fixed regulators do not have associated bus addresses and are typically placed directly under the root node where their names must still be unique despite not having a unit address. Fix the malformed example node which had a unit address but no "reg" property by dropping the unit address. Also, try to make the example more useful by using the recommended generic node name "regulator", but with a suffix reflecting the regulator name in order to make it unique. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
68 lines
1.6 KiB
YAML
68 lines
1.6 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Fixed Voltage regulators
|
|
|
|
maintainers:
|
|
- Liam Girdwood <lgirdwood@gmail.com>
|
|
- Mark Brown <broonie@kernel.org>
|
|
|
|
description:
|
|
Any property defined as part of the core regulator binding, defined in
|
|
regulator.txt, can also be used. However a fixed voltage regulator is
|
|
expected to have the regulator-min-microvolt and regulator-max-microvolt
|
|
to be the same.
|
|
|
|
properties:
|
|
compatible:
|
|
const: regulator-fixed
|
|
|
|
regulator-name: true
|
|
|
|
gpio:
|
|
description: gpio to use for enable control
|
|
maxItems: 1
|
|
|
|
startup-delay-us:
|
|
description: startup time in microseconds
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
enable-active-high:
|
|
description:
|
|
Polarity of GPIO is Active high. If this property is missing,
|
|
the default assumed is Active low.
|
|
type: boolean
|
|
|
|
gpio-open-drain:
|
|
description:
|
|
GPIO is open drain type. If this property is missing then default
|
|
assumption is false.
|
|
type: boolean
|
|
|
|
vin-supply:
|
|
description: Input supply phandle.
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
|
|
required:
|
|
- compatible
|
|
- regulator-name
|
|
|
|
examples:
|
|
- |
|
|
reg_1v8: regulator-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&gpio1 16 0>;
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
gpio-open-drain;
|
|
vin-supply = <&parent_reg>;
|
|
};
|
|
...
|